Samsung HLP5063WX Support Question
Find answers below for this question about Samsung HLP5063WX - 50" Rear Projection TV.Need a Samsung HLP5063WX manual? We have 1 online manual for this item!
Question posted by cccournoyer on November 28th, 2011
5063 Tv. Pictures Flickers Then Goes Out After 1 Min, I Do Have Audio Though
Current Answers
Answer #1: Posted by TVDan on November 28th, 2011 10:43 AM
What this indication is, the microprocessor has lost the signal from the optical engine that "the lamp is lit and all is well". There are many things that need to happen before the lamp will start up. The power supply must develop all the needed voltages required by all the rest of the circuits, the cooling fans must be running at the correct speeds, the lamp door switch must be closed (interlock switch), The Color Wheel must be able to spin at the 1800 RPM and lock in sync with the video signal, the ballast circuit must be able to develop the 5000 volts to start-up the mercury vapor lamp, and the lamp needs to be in good working condition to light up. There should be no weird noises pointing to the fact that a fan or the color wheels motor bearings are starting to go bad.
The normal failures are the lamp and the color wheel. Unfortunately there is NO way to test a lamp. I have seen nearly 100 lamps come into my shop that has failed in less than a month, and many that didn't last one full day. These lamp you buy off the web are many times factory seconds. I have had some customers send back a lamp two, three, and four times before they got one that lasted through the warranty. Our shop only buys from the manufacturer. When you turn on this DLP HDTV the fans will start up first and then the color wheel will spin-up. If the color wheel doesn't get up to the 1800 RPM and maintain that speed then the lamp will not get to enable pulse. unfortunately after three attempts the set will shut down and the indicators will blink telling the customer to change the lamp, and of course after the customer does it, the problem remains the same. The microprocessor is located in the signal cluster and all it knows is that the lamp didn't light up correctly, so it gives the change lamp LED indicator blinkTV Dan
Related Samsung HLP5063WX Manual Pages
Samsung Knowledge Base Results
We have determined that the information below may contain an answer to this question. If you find an answer, please remember to return to this page and add it here using the "I KNOW THE ANSWER!" button above. It's that easy to earn points!-
General Support
... 4:3 91 Just Scan 92 Wide(LCD) 93 Wide TV(DLP) 94 Wide PC(DLP) 0x08 95 Digital NR 96 97 98 99 Auto 100 DNIe 101 Demo 102 103 HDMI Black Level 104 low 105 Film Mode 106 107 Color Gamut Wide 114 115 sRGB 116 Picture Reset Full Picture Reset 118 Current Picture Reset 119... -
General Support
... sources (cable, set-top-box, DVD player, VCR, etc.) are using your Samsung LCD TV strictly as a Computer Monitor If you have pushed the On button, but the blinking should stop once the screen lights up and goes on . Make sure that it is failing and you are trying to get the... -
Using Anynet+ With A Home Theater SAMSUNG
... optical cable from the Digital Audio Out on the back of the TV to an Anynet+ home theater using an HT-AS720ST Home Theater Receiver and an LN40A750 LCD Television. Product : Televisions > To connect a television and home theater with the Anynet+ function. Optical out on the rear of the Anynet+ Television (LN40A750) HDMI...
Similar Questions
MY samsung TV HLP5063WX has no picture, can hear vibrating sound as I push power ON. It has no audio...
Displays check Fan #1 on the tv screen. Please illustrate location of fan # 1 and how to replace it ...
i have a HLP5063WX/XAA IT IS ABOUT 6 YEARS OLD THE SCREEN KEEPS GOING BLACK FOR ABOUT 2-3 SECONDS TH...
The Screen goes blank then hear a popping noise a power goes off.
I have had my 50 in tv for 7 years and it just started to click off while watching it, and the front...