Honeywell RTH2310B Support Question
Honeywell RTH2310B Support Question
Find answers below for this question about Honeywell RTH2310B.Need a Honeywell RTH2310B manual? We have 1 online manual for this item!
Question posted by robg2718 on February 17th, 2013
Help With Thermostat Honeywell Rth2310b, Cannot Change Temp
The person who posted this question about this Honeywell product did not include a detailed explanation. Please use the "Request More Information" button to the right if more details would help you to answer this question.
Current Answers
Related Honeywell RTH2310B Manual Pages
Owner's Manual - Page 1
Quick Installation Guide
RTH2310
Programmable Thermostat 69-2214EF-04
Owner's Manual - Page 2
.... 5) Connect the wires. 6) If the wire labels don't match. 7) Specify the furnace type. 8) Install the batteries. 9) Install the thermostat. 10) Set the system. We are here to help. Call 1-800-468-1502.
1 Quick Installation Guide
Installation is Easy
Your new thermostat has been designed for fast and easy installation.
Do you need assistance?
Owner's Manual - Page 3
... the following systems:
• Gas, oil or electric furnace • Central air conditioner • a hot water system with heat pumps or multi-stage systems.
2 This thermostat is not compatible with or without pump • a millivolt system • a central heating and cooling system
If you are not sure of your system type...
Owner's Manual - Page 4
... local waste management authority for instructions regarding recycling and proper disposal.
3 Quick Installation Guide
2 Remove Old Thermostat
2.
1) Turn power off at the heating/cooling system.
2) Remove old thermostat, but leave wallplate with wires attached.
Contact your old thermostat in the trash if it contains mercury in a sealed tube.
Do not remove wallplate yet.
Owner's Manual - Page 5
... touch and short other wires. Wrap the wires around a pencil to identify wires. RTH2310 Programmable Thermostat
3 Identify Wires
3. Wrap the bare metal end of each wire. Do not use non-connected... attached to a terminal marked C or C1, they will not be connected to your new thermostat. IGNORE WIRE COLORS: Use terminal screw designations to prevent them from falling though the wall opening...
Owner's Manual - Page 6
Insert plastic anchors. Pass wires through opening of wallplate and secure wallplate to the wall using provided screws.
5 Quick Installation Guide
4 Mount New Wallplate
4.
1) Remove coverplate.
2) Loosen screw (the screw remains captive on wallplate).
3) Remove thermostat.
4) Mark and drill appropriate mounting holes (or use existing holes).
Owner's Manual - Page 7
RTH2310 Programmable Thermostat
5 Connect Wires (typical wiring) 5. If a wire does not match any excess wire back into the wall opening. Remove jumper if you have both R and Rc ... with the terminal having the same letter.
2) Loosen the terminal screws using a screwdriver, insert the wires, then tighten the screws.
3) Push any terminal on the thermostat, see next page.
6
Labels don't match?
Owner's Manual - Page 9
Set the Jumper J2, on the back of the thermostat, if you have connected a wire to this factory-set position if you have a gas or oil furnace.
RTH2310 Programmable Thermostat
7 Specify Furnace Type
6. HE Place the jumper to the G terminal. J2 jumper
HG Leave the jumper in this position if you have an electric furnace.
8
Owner's Manual - Page 10
..., the setpoint is installed on the wall. It is normal that the displayed temperature be higher than the ambient temperature if you are installed, the thermostat performs a series of tests for approximately 5 seconds. You will display the ambient temperature once it is 70 °F (21 °C).
9 Quick Installation Guide
8 Install Batteries...
Owner's Manual - Page 11
RTH2310 Programmable Thermostat
9 Install thermostat
8.
1) Mount the thermostat on the wallplate.
2) Tighten the screw and install the coverplate.
3) Turn power back on at the heating/cooling system.
10
Owner's Manual - Page 12
...: 2=30 min, 3=20 min, 4=15 min, 5=12 min, 6=10 min
69-2214EF-04 M.S. Quick Installation Guide
10 System Setup
9.
1) Press both and buttons simultaneously.
3) To change the setting, press the or button. Rev. 03-11 Printed in bold and underlined.
2 See page 3 of Operating Manual.
3 Use the system switch to the...
Owner's Manual - Page 13
Guide d'installation rapide
RTH2310
Thermostat programmable 69-2214EF-04
Similar Questions
Thermostat Th5220d1003 Automatically Changes Temp To 50
It automatically went down to 50 and any attempt to increase temp it reverted to 50. Tech who instal...
It automatically went down to 50 and any attempt to increase temp it reverted to 50. Tech who instal...
(Posted by Gifflix 1 year ago)
T8400c, Can't Change Temp Setting.
I can't change the temp settings up or down for hot or cold. Only the rooM temp displays. Is there a...
I can't change the temp settings up or down for hot or cold. Only the rooM temp displays. Is there a...
(Posted by Dfehre 9 years ago)
Honeywell Thermostat Rth2310b How To Change From Celcius To
(Posted by livkaSA 9 years ago)
How To Change Honeywell Thermostat Rth2310b Manual From C To F
(Posted by admgraf 10 years ago)