Bernina Aurora 440QE Support Question
Bernina Aurora 440QE Support Question
Find answers below for this question about Bernina Aurora 440QE.Need a Bernina Aurora 440QE manual? We have 1 online manual for this item!
Question posted by estelle74157 on March 4th, 2023
Bernina Qe 440 Decoratve Stitch 60 And 61 , Quilting Sttch. Does Not Perform.
the stitch is supposed to imitate hand quilting by using regular thread in bobbin and monofilament on top. Supposed to pull bobbin thread to top to make the stitch. Supposed to raise the tension. Even on ten the bobbin thread dorsn t come up as it is supposed to. Presser foot? Nredle? Thread wight in bobbin?
Current Answers
Answer #1: Posted by SonuKumar on March 4th, 2023 7:48 PM
SonuKumar
Member since:
May 9th, 2021 Points: 16,598,000
Member since:
May 9th, 2021 Points: 16,598,000
If the bobbin thread is not coming up when using the Bernina Aurora 440QE to imitate hand quilting with regular thread in the bobbin and monofilament on top, here are some possible solutions to try:
- Check the presser foot: Make sure that the presser foot is properly attached and that it is not putting too much pressure on the fabric. If the presser foot is too tight, it can prevent the bobbin thread from being pulled up properly. Try adjusting the presser foot pressure or using a different foot that is better suited for quilting.
- Check the needle: Make sure that the needle is the correct size and type for the thread being used. A needle that is too small or too dull can also prevent the bobbin thread from being pulled up properly. Try using a new needle that is the correct size for the thread being used.
- Check the bobbin thread weight: Make sure that the bobbin thread is the correct weight for the regular thread being used on top. If the bobbin thread is too heavy or too light, it can affect the tension and prevent the thread from being pulled up properly.
- Check the bobbin case: Make sure that the bobbin case is properly inserted and that there is no lint or debris inside that could be affecting the tension. If necessary, clean the bobbin case and reinsert it properly.
- Adjust the tension: While it may seem counterintuitive, sometimes tightening the tension can actually help the bobbin thread to be pulled up properly. Try increasing the tension slightly and see if that helps.
If none of these solutions work, it may be necessary to take the machine to a technician to be serviced.
Please respond to my effort to provide you with the best possible solution by using the "Acceptable Solution" and/or the "Helpful" buttons when the answer has proven to be helpful.
Regards,
Sonu
Your search handyman for all e-support needs!!
Related Bernina Aurora 440QE Manual Pages
User Guide - Page 3
... practical stitches, Quilt stitches, Decorative stitches Buttonholes - Your sewing computer
Accessories Details aurora 430 / 440 QE / 450 Setting up the embroidery computer Important embroidery information Embroidery operating requirements Bernina embroidery software Software - on
30-32 33
34-47 48
49-56
All about embroidery
Details Accessories Setting up the sewing computer Thread tension...
User Guide - Page 4
...Text Herbert Stolz Drawings Müller-Melzer ID, Kreuzlingen Design concept Susanne Ribi Copyright 2008 BERNINA International AG, Steckborn
032907.52.04_1103_a430_a440_a450_EN Risk of damage! ponding subject you will find on...improve the product, and for our customers' benefit, all of the sewing and embroidery computer's features, parts, and accessories are subject to unannounced changes and alterations...
User Guide - Page 5
...when sewing buttonholes in zippers, Straight stitch
5 Blindstitch foot Blind hem, Edge stitching, Straight stitch Blindstitch • for slide-on table • Instructional presentation CD-ROM • Stitch-pattern card
1
A aurora 430 / 440 QE
2
11
A
B
B aurora 450
Presser feet*
1430/440 , 1C450 Reverse pattern foot Straight stitch Practical and decorative stitch Quilt stitch •...
User Guide - Page 9
...(Free Hand System) connection
Back view 33 Horizontal spool pin 34 Carrying handle 35 Rear thread guideng 36 CFL sewing light 37 Slide-on table socket 38 Bobbin pre-...Bobbin cover 2 Stitch plate 3 Attachment base for stitch card 13 Bobbin winder with on /off switch and thread
cutter 14 Stitch selection buttons 15 «clr» (clear) button 16 #-button (hash) 17 Stitch width buttons 18 Stitch...
User Guide - Page 11
... knee push lever to an authorized BERNINA dealer! CFL Sewing Light
Setting up the sewing computer 11
Free Hand System (FHS) presser foot lifter
& Your dealer can be brought to the right • the feed dog is lowered simultaneously • the feed dog is raised as soon as the first stitch is sewn
Attaching the presser...
User Guide - Page 13
...; place second thread spool and the
bobbin, separated by a spool disc, on
additional spool pin (both spools have to the front in the slit
and past the tension disc A on the right side • thread sewing computer as usual and thread the right needle
Threading the Second Thread • when using the Supplementary thread guide (special accessories), thread winds off...
User Guide - Page 16
... = aurora 450
To insert the bobbin case • hold the bobbin case latch • aurora 430 / 440 QE: the finger on the
case should point upwards • aurora 450: bobbin case opening points
up • insert so that it clicks into place
Bobbin thread cutter • take the thread over cutter A and cut it • close the bobbin cover • the bobbin thread does...
User Guide - Page 18
... BERNINA requires needle system 130/705 H. Fabric type and structure determine which thread weight, needle size and needle tip should travel smoothly down the long groove on the edges of the needle.
Guidelines
lightweight fabrics: thin thread (darning thread, embroidery thread)
mediumweight fabrics: normal sewing thread
heavyweight fabrics: sewing thread (quilting thread, topstitching thread...
User Guide - Page 27
... on single fabric • always use an appropriate stabilizer as a backing • remove after sewing • thread the lower thread in the finger of the bobbin case for best results
(430 / 440 QE)
032907.52.04_1103_a430_a440_a450_EN
No. 155 • activate Mirror image, program mirrored
stitch No. 155
• sew stitch combination, the stitches alternate (original and mirror image...
User Guide - Page 28
...and the available
number of empty memory spaces (e.g.
60) start to blink, and «mem»...using
etc.
• programming several words:
• to insert a space, select ( _ )
• program, using
• program the next word
• if adjustments are made to the stitch...8226; activate the Securing function
• the sewing computer secures at the beginning of the entered ...
User Guide - Page 36
... the fabric selected
Thread: cotton or polyester
Feed dog: up
Presser foot: 430 / 440 QE: Reverse pattern foot No. 1
450:
Reverse pattern foot No. 1C
Securing stitch • for all fabrics • secures beginning and end of seam
Sewing long seams • quicker securing at beginning and end of
seam • exact, regular and safe securing...
User Guide - Page 46
... hand quilting can be sewn with soft, slightly damp cloth. Make sure that the lens on the bottom of 1mm - 1.5mm is running at an angle • attaching the sole: slide the sole up lower thread • hold upper and lower thread and press
the Start-/Stop button to start the BSR mode • sew 5-6 securing stitches...
User Guide - Page 52
... No. 14 Round buttonhole with square end No. 15 Keyhole buttonhole No. 16 Keyhole buttonhole with tapered
end No. 17 Heirloom buttonhole No. 18 Straight stitch buttonhole
#VUUPOIPMFTBSFOPUPOMZQSBDUJDBM DMPTVSFT UIFZDBOBMTPCFVTFEGPSB EFDPSBUJWFFGGFDU
1SFQBSBUJPO 2&UISFBEUIFMPXFSUISFBEJO
UIFGJOHFSPGUIF...
User Guide - Page 53
... 5 step keyhole buttonhole
Buttonholes 53
1. sew bartack and securing stitches
032907.52.04_1103_a430_a440_a450_EN sew the top bartack and the second bead, stop the sewing computer
• press the Quick reverse button
2. sew the bottom bartack and securing stitches
1. sew straight stitch forwards, stop the sewing computer at the first stitch (buttonhole begin) • press the...
User Guide - Page 55
...52.04_1103_a430_a440_a450_EN
6. the first bartack
4. the second bartack and securing stitches
• sewing computer stops and returns automatically to buttonhole begin • all subsequent... pressing the Quick reverse button) the sewing computer automatically sews the eye
3. sews bartack and securing stitches • the sewing computer stops and returns
automatically to buttonhole...
User Guide - Page 56
... ready to sew the
next eyelet
Cutting eyelets open • use an eyelet punch
Eyelets • ideal as eyes for soft toys, dolls
or puppets
More marked appearance • thread bobbin thread in finger
on bobbin case (430 / 440 QE) = tighter bobbin tension • for embellishment or as a reinforced opening for decorative
purposes only can be stitched without forming a thread shank...
User Guide - Page 60
pull over upper thread spool for even spooling
Embroidery software BERNINA / mouse pad
USB connecting cable for upper thread spools - 60 Standard accessories
Standard accessories
Large oval embroidery hoop (145x255mm) Template for embroidery hoop
Embroidery presser foot No. 26
Embroidery needle range
Art Design V1 Embroidery ...
User Guide - Page 63
... control
Releasing the cable • the cable connects the module to the
sewing computer • pull the cable out of the holder on the
back of the module
When ...connecting the embroidery module, attention must be paid that all items are on the module • insert the cable into the socket on the
right hand side of the sewing...
User Guide - Page 73
...display of the motif name, width and
height in mm
Embroidery time and stitch count • display in the original color • for more than ...thread number / color
number • position of the current color / total
number of all colors • embroidery time of this color • total stitch count of the motif is stitched. ry time of the motif selected • display of the total stitch...
User Guide - Page 85
... Needle summary Needle up/down Setting the needle position Threading Twin and triple needle
Needle system
16 60, 64
8 18, 19
24 19 24 8, 24 14 13 18
O
Optional accessories
Embroidery
61-62
Sewing
7
Overlock
Application
39-40
Overlock foot
5
Stitch patterns
30-33, 81-83
Outline stitch
68
Overview
Display
23
Embroidery module
59
Function...
Similar Questions
I Bought A Bernina Qe 440. I Have Read This Has A Usb Port But I Can’t Find I
I can't find the USB port on my Bernina QE 440. Also I bought a computer nc the connection cord for ...
I can't find the USB port on my Bernina QE 440. Also I bought a computer nc the connection cord for ...
(Posted by Karichar1027 1 year ago)
How Do I Change Stitches On Bernina 440 To Stitch 157
(Posted by ngravrobgil 9 years ago)
How To Thread A Bobbin On A Bernette 56 Sewing Machine
(Posted by scannie2 9 years ago)
Instructions To Use The Aurora 440 Decorative Stitches
(Posted by helenjanesampson 11 years ago)