Sharp AR-M205 Support Question
Sharp AR-M205 Support Question
Find answers below for this question about Sharp AR-M205.Need a Sharp AR-M205 manual? We have 2 online manuals for this item!
Question posted by ranjitdolas on September 21st, 2012
Sharp Ar-m205 Paper Misfeed Indicator Blinking
sharp ar-m205 paper misfeed indicator blinking but I chake not paper jam. what I do.Is any sensor problem or reset machine.
Current Answers
Related Sharp AR-M205 Manual Pages
AR-M160 | AR-M205 Interactive Operation Manual - Page 5
... each of paper for models that support two-sided printing)
5 Click the "Print" button ("OK" button in the machine.
1 Make sure that "SHARP AR-XXXX" is delivered to print.
3 Select "Print" from WordPad.
ON LINE
When the indicator is: ● Lit, the machine is online and
ready to print, or is printing.
● Blinking, the machine is
processing...
AR-M160 | AR-M205 Interactive Operation Manual - Page 6
... set to "Auto Select"
If "Paper Source" is disabled
The PAPER SIZE indicator on the operation panel will blink. ● To cancel a print job, press the [CLEAR] key ( ) or the
[CLEAR ALL] key ( ). ● To resume printing, press the [ON LINE] key to switch the
machine online. Caution
When the machine is connected to your computer...
AR-M160 | AR-M205 Operation Manual - Page 12
... [ ] Toner cartridge replacement required
indicator (p.62) [ ] Developer replacement required indicator
(p.62) [ ] Paper required indicator (p.62) [ ] Misfeed indicator (p.62)
10 One-sided copies from one-sided originals. The indicator blinks while the machine is receiving print data and while printing is paused. (p.39)
4 ORIGINAL TO COPY key/indicators (AR-M205 only)
Press to select one...
AR-M160 | AR-M205 Operation Manual - Page 13
...Paper feed location/misfeed location indicators
The selected paper feed location is shown by a lit indicator ( ). (p.21) The general location of misfed paper is shown by the machine, hold the [0] key down when the machine... total number of pages output by a blinking red indicator ( ). (p.63)
30 PRESET RATIO selector keys ( , ) /indicators
Use to select preset reduction/enlargement copy ratios. (p....
AR-M160 | AR-M205 Operation Manual - Page 16
... tray (up to 250 sheets).
• Make sure that the machine is not fanned, double-feeds or misfeeds may occur.
4 Load paper into the tray. Note
If you loaded a different size of the pressure plate down until it .
When adding paper, take the remaining paper out and combine it locks in the tray, go to...
AR-M160 | AR-M205 Operation Manual - Page 38
... the blinking ORIGINAL SIZE indicator.
1 Place the original(s).
The location of the margin to be increased can be select to be either at the left margin and the top margin in the user programs. (p.45) • The margin width can also switch between the left edge or the top of the page (AR-M205...
AR-M160 | AR-M205 Operation Manual - Page 41
... take place using a size of the print image. When "Use close to begin printing.
USING THE PRINTER MODE
The procedure for loading paper is selected, and select print settings in the printer driver. When the indicator is blinking, the machine is printing a print job from memory.
3 Open the file that you wish to the...
AR-M160 | AR-M205 Operation Manual - Page 54
... and misfeed removal. MACHINE/COPYING PROBLEMS
The machine does not operate...53 Copies are too dark or too light...53 Blank copies...53 The paper size used for service. Many problems can be set...55 A copy job stops before it is finished...55 The POWER SAVE indicator is lit...55 Any of the alarm indicator is lit or blinking...
AR-M160 | AR-M205 Operation Manual - Page 55
...placed face up .
TROUBLESHOOTING
MACHINE/COPYING PROBLEMS
The following problems are too dark or too light. Power switch OFF.
→ Turn the power switch ON. The machine does not operate. Load appropriate paper in the same orientation as the blinking ORIGINAL SIZE indicator. The paper size used for the original and paper.
The paper is in a paper tray. Paper damp.
→...
AR-M160 | AR-M205 Operation Manual - Page 56
... size may not be loaded in a bag to prevent moisture absorption.
TROUBLESHOOTING
Problem
Paper misfeed. White or black lines appear on the tray, remove some of the paper.
→ Adjust the guides to sunlight. Paper curled or damp.
→ Do not use curled or crimped paper. Paper curled or damp.
→ Do not use curled or crimped...
AR-M160 | AR-M205 Operation Manual - Page 58
... and uneven. To change the tray paper size setting in the printer driver, see "SPECIFICATIONS".
The tray size settings are blinking.
→ When "Use close to turn on the ON LINE indicator. Problem The machine does not print. (ON LINE indicator does not blink.)
The machine does not print. (ON LINE indicator was blinking.)
Printing is complete. Copy job is...
AR-M160 | AR-M205 Operation Manual - Page 59
....
The printed image is properly loaded. During periods when the machine is not used for the application you are set sufficient margins in the paper settings of the specified print quality area.
→ Set the margins in use curled or crimped paper.
TROUBLESHOOTING
Problem The printed image is not loaded in the tray the...
AR-M160 | AR-M205 Operation Manual - Page 60
... model name of the alarm indicator and error message in the display, and take appropriate action. Page -
- 62
58
When "Photo" is selected, you can be sure you have selected "SHARP AR-XXXX" (where XXXX is lit or blinking. TROUBLESHOOTING
Problem
Lines in tables are not appropriate for both the paper and the print job.
→...
AR-M160 | AR-M205 Operation Manual - Page 64
... your SHARP service center as soon as the blinking ORIGINAL SIZE indicator. Print the data or clear it is open .
The tray is out of the 2 x 250-sheet/250-sheet paper feed unit is in "MISFEED REMOVAL".
Toner cartridge replacement required indicator
Developer replacement required indicator
Maintenance indicator
Display
Paper required indicator
Misfeed indicator
Indication...
AR-M160 | AR-M205 Operation Manual - Page 65
... cover
Roller
6
If a small original (5-1/2" x 8-1/2", etc.) is misfed, or if an original misfeed occurs in the reversing tray of the misfeed and remove it.
Right side cover
63 MISFEED REMOVAL
When a misfeed occurs, the misfeed indicator ( ) and a misfeed location indicator ( ) will blink and the machine will cause dirty copies. Section A Open the feeding roller cover and remove...
AR-M160 | AR-M205 Operation Manual - Page 67
...
• When closing the side cover, press on the handle.
• If the misfeed indicator ( ) does not stop blinking, check for each location in the illustration below. Do not touch the photoconductive drum Caution (green portion) when removing the misfed
paper. TROUBLESHOOTING
MISFEED IN THE MACHINE
1 Open the bypass tray and the side cover.
2 Check the...
AR-M160 | AR-M205 Operation Manual - Page 68
...; Be careful about unfixed toner on the handle.
• If the misfeed indicator ( ) does not stop blinking, check for torn pieces of paper in the direction of the front cover.
4 Lift the fusing unit release lever.
2 Turn the roller rotating knob in the machine. Return the release levers to allow easier removal. Lower the fusing...
AR-M160 | AR-M205 Operation Manual - Page 71
... out the lower paper tray and remove the misfed paper. Note
If the misfeed indicator ( ) does not stop blinking, check for torn pieces of paper in the 250-sheet paper feed unit/2 x 250-sheet paper
feed unit.
1 Open the lower side cover. TROUBLESHOOTING
MISFEED IN THE LOWER PAPER TRAY (AR-M205 only)
Note
• Make sure that occur in the machine.
6
69
Be...
AR-M160 | AR-M205 Operation Manual - Page 76
... installed on the AR-M205
AR-M160
Option that can be installed on the AR-M160
Reversing single pass feeder (AR-RP6)
Platen cover (AR-VR5)
Options that can be some deviations from these values in this chapter. 8 Chapter 8 PERIPHERAL DEVICES AND SUPPLIES
PERIPHERAL DEVICES
Optional equipment and supplies are nominal values of continuous improvement, SHARP reserves the right...
AR-M160 | AR-M205 Operation Manual - Page 78
...DEVICES AND SUPPLIES
DUAL FUNCTION BOARD
A dual function board can be used, see "Convenient Copy Functions". (p.32)
Specification
Added functions
Electronic sort compression method Electronic sort memory Electronic sort scannable pages
AR... Store paper in paper misfeeds.
76 For copy functions that can be installed to add a variety of copy functions and enable use only SHARP Genuine ...
Similar Questions
How To Remove Paper Jam
while copieing there is paper jam frequenty
while copieing there is paper jam frequenty
(Posted by solutionpc 8 years ago)
How Do I Reset My Sharp Ar-m205 Printer From H4 Error
(Posted by princebaff 9 years ago)
Ar 5316 Paper Jam Before The Green Rotaing Handle .
(Posted by Anonymous-132523 10 years ago)
