Samsung HT-AS730S Support Question
Samsung HT-AS730S Support Question
Find answers below for this question about Samsung HT-AS730S.Need a Samsung HT-AS730S manual? We have 1 online manual for this item!
Question posted by fjlozano on February 17th, 2019
No Sound - Display Blinking
I tested 3 speakers and the equipment was working. When I fully connected, it does not work, and the display is blinking. I call Samusung support and they could not help me
Current Answers
Answer #1: Posted by hzplj9 on February 18th, 2019 4:23 AM
hzplj9
Member since:
June 25th, 2012 Points: 4,873,510
Member since:
June 25th, 2012 Points: 4,873,510
If you refer to the chart on the pages 16-19 of the user guide there are specific connections needed to use 3 speakers. There is a chart there on page 17. You can obtain a user guide from the attached link. Also verify the correct setup of the speakers by referring to the guide on page 31 onwards.
https://www.manualslib.com/manual/147532/Samsung-Ht-As730s.html
Hope that helps.
Related Samsung HT-AS730S Manual Pages
User Manual (user Manual) (ver.1.0) (English) - Page 1
To receive more complete service, please register your product at
www.samsung.com/register HT-AS730S
AV Receiver System
user manual
imagine the possibilities
Thank you for purchasing this Samsung product.
User Manual (user Manual) (ver.1.0) (English) - Page 5
... of 6 channels by connecting the receiver to the AV Receiver with the supplied iPod dock. Anynet+ (HDMI-CEC) Function
Anynet+ is a function that can enjoy music files by Digital Theater Systems Inc. Supporting full compatibility with normal stereo audio sources. DTS-ES adds an additional rear center surround channel for richer sound.
Accessories
Remote control...
User Manual (user Manual) (ver.1.0) (English) - Page 9
Displays the SETUP menu where you can select a menu item (INPUT, SPEAKER, SURROUND, OPTION). Stereo headset input jack.
Turns the receiver on/off.
Auxiliary AV input terminals used to move the cursor down in the SETUP menu. Toggles to select an input mode for setting up ASC (Auto Sound Calibration). Used to select a source...
User Manual (user Manual) (ver.1.0) (English) - Page 15
... for obtaining the best sound from a connected CD player.
10 SETUP/MENU button
Displays the SETUP menu where you can select a menu item (INPUT, SPEAKER, SURROUND, OPTION).
11
UP/DOWN/LEFT/RIGHT buttons
Used to navigate the menus.
12 INFO button
Displays information on the connected device currently being used to select the Test Tone function.
6 MO...
User Manual (user Manual) (ver.1.0) (English) - Page 20
... HDMI A TV with a DVI-D jack (TV not supporting HDCP)
Video/Audio Video -
Connecting external devices/YOUR TV Via HDMI
HDMI is protected by the
performance of the connected device. ` Since HDMI connection supports both of the connected external device and TV must support High-bandwidth Digital Content Protection System (HDCP). M ` Audio from analog conversion, enabling you can...
User Manual (user Manual) (ver.1.0) (English) - Page 28
... with safety and regulatory standards. and other countries.
28 iPod is a trademark of this device or its compliance with Ht-AS730S
M ` "Made for iPod" means that an electronic accessory has been designed to connect specifically to iPod and has been
certified by the developer to meet Apple performance standards...
User Manual (user Manual) (ver.1.0) (English) - Page 35
...speaker.
6.
EnG
● setup
SPEAKER SETUP
Setting the speaker size
Signal outputs and frequency response from the speaker will be adjusted according to your room.
35 "SETUP OFF" appears on the display.
2. Setting the Speaker
SPEAKER...subwoofer speaker. ~ CROVR : Select the crossover frequency for the best bass response in turn.
5. Press ◀▶ button to full range sound....
User Manual (user Manual) (ver.1.0) (English) - Page 36
... • S.R (surround right) : 1ft ~ 30ft • SBL (surround back left ) speaker distance from the center and surround speakers.
1. "SETUP OFF" appears on the display and goes into Setup Mode.
2. Press ▲▼ button to the maximum.
` The distance range of the overall speaker system is determined based on the F.L(front left ) : 1ft ~ 30ft • SW...
User Manual (user Manual) (ver.1.0) (English) - Page 37
... be selected in 1 step increments.
~ The sound gets quieter at -10dB and louder at +10dB.
-
To exit setup mode ~ Press SETUP/MENU, EXIT or RETURN button. Press SETUP/MENU button.
~ "INPUT" appears on the display and Setup Mode is exited. Press ▲▼ button to select "SPEAKER", and then press the
ENTER...
User Manual (user Manual) (ver.1.0) (English) - Page 38
... into Setup Mode.
2. The sound gets quieter at -10dB and louder at +10dB. You can adjust the speaker output level from -10 to check the speaker connection status or level.
1. Press SETUP/MENU button.
~ "INPUT" appears on the display and test tone stops.
38 SPEAKER SETUP (Continued)
Setting the test tone
Use the test tone to +10 dB
by...
User Manual (user Manual) (ver.1.0) (English) - Page 39
... ~ Press SETUP/MENU, EXIT or RETURN button. Press SETUP/MENU button.
~ "INPUT" appears on the display and Setup Mode is exited.
39
Press ▲▼ button to set STEREO mode you want.
~ STEREO... STEREO:MULTI : Select this mode when listening to sound through the front left and right speakers and subwoofer.
1. "SETUP OFF" appears on the display and goes into Setup Mode.
2.
User Manual (user Manual) (ver.1.0) (English) - Page 40
... (DSP)from 2 channel sources.
1. MUSIC : Provides 7.1 channel surround sound for digital, analog or existing stereo sources such as Dolby Digital and DTS.
` Pro Logic works only for PCM audio signals with side wall imaging.)
~ DIMENSION : You can set from the center speaker.)
M ` PANORAMA, DIMENSION and CENTER WIDTH settings are enabled only if the...
User Manual (user Manual) (ver.1.0) (English) - Page 41
... DTS and Dolby Digital multi channel signals.
` Pro Logic works only for 6.1 channel sound.
Press ▲▼ button to a high precision
digital ...speakers. To exit setup mode~ Press SETUP/MENU, EXIT or RETURN button. Press ▲▼ button to digitally simulate actual music environments such as concert halls or cinemas.
1. Press SETUP/MENU button.
~ "INPUT" appears on the display...
User Manual (user Manual) (ver.1.0) (English) - Page 42
... ENTER or ▶ button. ~ "EX/ES : AUTO" appears on the display.
4.
Dolby Digital -
M ` You cannot use DTS-ES without surround back speakers connected.
` If the input source is input, and does not work with this system that it can listen to 6.1 or 7.1 multi-channel sound using Dolby Digital Surround EX / DTS ES decoder.
~ OFF : Dolby...
User Manual (user Manual) (ver.1.0) (English) - Page 43
...1 step. ~ The sound gets smaller at -6dB and louder at +6dB.
- Press SETUP/MENU button.
~ "INPUT" appears on the display and Setup Mode is set... the TONE CONTROL you want. ~ You can adjust it is exited. EnG
● setup
SURROUND SETUP (Continued)
Setting Tone Control
This will be applied to all channels except for the subwoofer.
` You can also press TEST...
User Manual (user Manual) (ver.1.0) (English) - Page 44
...INPUT" appears on the display and goes into Setup Mode. 2.
mp3 music). Press button to set the OPTION you want to hear better sound from a low quality ...0 to 200mS in 10mS steps.
MP3 Enhancer
This also helps enhance your AV receiver experience. 1. Press ▲▼ button to a
digital TV. ...connected to select the "OPTION", and then press the ENTER. 3.
User Manual (user Manual) (ver.1.0) (English) - Page 53
... button.
~ Tuner number will disappear and station 89.10 will blink on the display.
4. Selected frequency.
~ Automatic tuning 1 : 1) Press TUNING...CH ( .,, ) button briefly to reduce noise. ~ This function works only with the Remote Control. M ` You can preset up to...tune in an area with weak reception, it will help to increase or decrease the frequency step by pressing...
User Manual (user Manual) (ver.1.0) (English) - Page 56
... cancel sleep timer ~ Press SLEEP button until "SLEEP : OFF" appears on the display. Press ▲▼ buttons to your speaker configuration and whether certain speakers are used or not. 1. To output sound again Press the MUTE button again. ~ MUTE will disappear and sound will be adjusted according to select "YES".
~ The unit will be
selected...
User Manual (user Manual) (ver.1.0) (English) - Page 61
... Surround Mode.
61
Remote controller does not work
• Is there static electricity in a place with new batteries. • Operate at close distance. There is no sound from the left/right channels is reversed.
• A re the left/right speaker or left/right input/output cables connected properly?
• Check the left/right channel...
User Manual (user Manual) (ver.1.0) (English) - Page 62
...appears on the display, check whether the speaker terminal is no problem when you turn on the display and the unit will disappear on the unit
62
Symptom
There is no sound from surround back speakers
Check
Remedy
• Are the surround back speakers connected properly?
&#... set to EX/ES?
• Refer to pages 16 ~18 to connect it off, PROTECTION mark will work properly.
Samsung Knowledge Base Results
We have determined that the information below may contain an answer to this question. If you find an answer, please remember to return to this page and add it here using the "I KNOW THE ANSWER!" button above. It's that easy to earn points!-
General Support
..., you have a DLP TV or a TV attached to adjust the sound synch function, call Samsung Customer Care at 1-800-SAMSUNG (1-800-726-7864) any day between 9 a.m. Solutions for this can be able to a Home Theater System (HTS) or, sometimes, a stereo system. If your system is connected directly to the HTS or stereo and the set top box and the... -
How To Connect A Home Theater System (Analog) SAMSUNG
... Connect A Home Theater System (Analog) How To Connect A Home Theater System (Analog) Analog Stereo Cable Important: Samsung strongly recommends setting the Internal Mute to highlight the Sound menu, and then press [Enter]. The Main Menu appears. Press the [Down Arrow] to "On" You must press this step. to work. To connect analog stereo cables from the TV to the HTS... -
How To Connect A Home Theater System (Analog) SAMSUNG
...; 18983. Many Home Theater Systems have a feature that switches between different inputs. You must press this setting on for all of the speakers may not output sound when receiving a two channel signal. SCH-I920 - Turn on the TV remote. the TV on, and then press [Menu] on you connected the audio cables to work. the HTS remote, set...
Similar Questions
Tv Remotes Keep Switching Off My Samsung Dvd Home Theater System Ht-x70
Every time I use my TV remote to change channels it switches off my Samsung DVD Home Theater System ...
Every time I use my TV remote to change channels it switches off my Samsung DVD Home Theater System ...
(Posted by clarkandy62 6 months ago)
Samsung Home Theater System Ht-p30, Audio From Tv
Is it possible to connect TV sound to play through this system?
Is it possible to connect TV sound to play through this system?
(Posted by prstark1115 7 years ago)
How Do I Reset Or Change The Region Code On My Home Theater System Ht-z310t/xaa?
I purchased movies that I can not watch now.. They say the region code is the problem.. How do I res...
I purchased movies that I can not watch now.. They say the region code is the problem.. How do I res...
(Posted by Mljtatesgirl 8 years ago)
Why Does The Display Show It Is In Headphone Mode
(Posted by Jseymour993 9 years ago)
Connect Headset To Samsung Ht-as730s Avr
I hooked up a xbox by a HDMI cable and now want to connect the turtle beach wired headset to the AVR...
I hooked up a xbox by a HDMI cable and now want to connect the turtle beach wired headset to the AVR...
(Posted by tirmen3 10 years ago)