Lexmark E260dn Support Question
Lexmark E260dn Support Question
Find answers below for this question about Lexmark E260dn.Need a Lexmark E260dn manual? We have 5 online manuals for this item!
Question posted by raDaKidJ on October 22nd, 2014
E260dn Pc Kit How To
The person who posted this question about this Lexmark product did not include a detailed explanation. Please use the "Request More Information" button to the right if more details would help you to answer this question.
Current Answers
Answer #1: Posted by freginold on November 9th, 2014 6:15 AM
freginold
Member since:
December 20th, 2011 Points: 23,253,895
Member since:
December 20th, 2011 Points: 23,253,895
Hi, you can find instructions for replacing the photoconductor kit on page 88 of the user manual. If you don't have the manual, you can download it here.
Related Lexmark E260dn Manual Pages
Maintenance Guide - Page 8
... this by displaying the "Photoconductor life warning" light sequence or the "Replace photoconductor" light sequence. While the printer may continue to function properly after the photoconductor kit has reached its official end‑of‑life, print quality significantly decreases.
Light sequences
Photoconductor life warning
‑ Blinking ‑ On Replace photoconductor
‑...
User Guide - Page 26
...% post-consumer waste) and a variety of test paper from around the world, using these types of paper, consult your printer's impact even further.
In 1998, Lexmark presented to work very well in laser printers, despite surface texture. Saving paper and toner
Using recycled paper and other office papers
As an environmentally conscious company...
User Guide - Page 30
Light sequence
What you can do Replace the photoconductor kit.
Blinking - On
Send a job to print. On (yellow)
Interpreting the printer control panel lights
30
Blinking - Power Saver -
Replace PC Kit - Ready - On (green)
Send a job to print.
User Guide - Page 35
PC Kit life warning - Printer error - On
Interpreting the printer control panel lights
35
Blinking
- On
The following light sequences show that there is low - On -... Press and release to clear
the light sequence and continue processing the print job.
• With the printer turned off,
remove the toner cartridge and shake it to extend its life.
• Replace the toner cartridge,
and then...
User Guide - Page 49
Single-sided paper labels designed for laser printers are not supported. Consider these characteristics when evaluating new paper stock. Note: Duplex printing ... g/m2 (43 lb bond) grain long paper.
Use paper labels only. Single-sided paper labels designed for laser printers are based on the printer at a time.
Load up to Tray 1
250 sheets of paper 150 sheets of A6-size paper 50 ...
User Guide - Page 54
... 250- Paper and specialty media guide
54 or 550-sheet
tray
optional tray
X
Manual feeder
Duplex path X
Envelopes (smooth)2 X
X
X
1 Single-sided paper labels designed for laser printers are not supported.
2 Use envelopes that lie flat when individually placed on a table facedown. It is recommended to print 20 or fewer pages of paper...
User Guide - Page 58
...
Page orientation is placed faceup. Printing specialty documents
Tips on letterhead. The top edge of the tray. Note: Check with the logo is acceptable for laser printers.
The top edge of the sheet with the manufacturer or vendor to load the letterhead:
Source or process
• Standard 250-sheet tray • Optional...
User Guide - Page 59
... quantities. Tips on using transparencies
Print samples on the transparencies being considered for laser printers.
Are stuck together or damaged in the Paper menu using envelopes
Print samples on...We recommend Lexmark part number 70X7240 for letter-size transparencies and Lexmark part number 12A5010
for laser printers. Use up to 180° C (356° F) if Transparency Weight is set ...
User Guide - Page 60
...printing temperature may cause labels to verify that: - Adhesive material contaminates the printer and could void the printer and cartridge warranties.
• Do not use before buying large quantities. ... material. • Use full label sheets. Tips on the card stock being considered for laser printers. Print samples on using the Embedded Web Server, or from edges is in a jam....
User Guide - Page 87
... this by aligning the rollers on the toner cartridge with the arrows on the tracks of the
photoconductor kit. Push the toner cartridge in as far as it will go. On
Maintaining the printer
87 Blinking -
5 Install the new toner cartridge by displaying the "Photoconductor life warning" light sequence or the "Replace...
Service Manual - Page 17
For information on E260d and E260dn. See "Repair information" on page 4-1 to determine the symptom and repair the failure. This book contains information on E460dn and E460dw, see... tests as needed to the correct field replaceable unit (FRU) or part. 4513-220, -230
1. General information
The Lexmark™ E260d and E260dn are monochrome laser printers designed for more information.
Service Manual - Page 30
... invalid refill
Missing or defective print cartridge
Unsupported print cartridge
Photoconductor kit life warning¹ 12
Programming engine code/
13
Programming system code
✷
z
z
z
z
Service error²
13
✷
✷
✷
✷
✷
✷
Printer error³
13
z
z
2-4 Lexmark™ E260d, E260dn
z
Light on page 2-2 for icon information.
Service Manual - Page 38
...
The photoconductor is replaced. Replace photoconductor (printer hard stop)
✷
✷
z
Meaning
The photoconductor kit is Off.
The factory default is full and must be replaced. Action
• Press and release Continue to print a photoconductor kit instruction page. • Replace the photoconductor kit.
2-12 Lexmark™ E260d, E260dn 4513-220, -230
Toner cartridge...
Service Manual - Page 79
....
To exit print quality test pages, turn the printer off the printer. Blank page
FRU Toner cartridge (not a FRU)
Printhead LVPS/HVPS Controller board
Action
Remove the toner cartridge, and gently shake it to isolate problems such as light or toner streaks. Try a different PC kit.
• With the cartridge out, check the spring...
Service Manual - Page 80
... 18.
• If any of -life. With the printer off, disconnect the LVPS/HVPS cable from a different toner ... E260dn If this does not correct the problem, then replace the following FRUs one at PCN3. FRU Toner cartridge (not a FRU) PC Kit ...laser exposure or incorrect charging of support. • If the values are correct and the toner electrodes are installed correctly, then try a new PC Kit...
Service Manual - Page 81
Check to make sure that the laser light path is low, then try a new one. Check the media settings in the printer driver. A heavier media may require higher heat to heavier paper or even...and right transfer roll bearings. Check the springs in image density horizontally across page
FRU PC Kit (not a FRU)
Transfer roll
Action
The charge roll may not be operating at its ends. Replace as necessary....
Service Manual - Page 82
... a new toner cartridge. Recheck condition before replacing PC Kit, if necessary. Replace the fuser as necessary.
2-56 Lexmark™ E260d, E260dn
Inspect the fuser for signs of contamination.
Check...card
Action
Make sure the toner cartridge and PC Kit are installed correctly and that the laser beam is not blocked. With the printer off, check to contaminate the transfer roller. ...
Service Manual - Page 83
... printer off , clear the path or clean the lens. Try a different toner cartridge. Inspect the fuser at its entry for debris.
• Make sure the media is straight and unwrinkled. • Replace the PC Kit, and recheck before replacing the toner cartridge. Replace as needed.
If the lines are usually caused by the laser...
Service Manual - Page 86
...cables).
Place a sheet of damage or fatigue.
Replace as necessary.
2-60 Lexmark™ E260d, E260dn Jobs are not printing, and the error light is flushing data (Ready/Data and Error lights ... sure the toner cartridge assembly is installed properly. • Make sure the printer front cover is closed . Do not try to the PC drum. On the controller board, verify +5 V dc on pin 10 at...
Service Manual - Page 90
... by pressing and holding Continue . 4.
The replace photoconductor message should be cleared only when the photoconductor kit has been replaced.
3-4 Lexmark™ E260d, E260dn
Off (default) On
Help isolate print quality problems, such as streaking. Resources in printer memory (RAM)
are unaffected.
Four pages print to the factory default values except:
• All...
Similar Questions
Where Do I Find The Pc Kit. Have Message Error To Replace Pc Kit?
just moved this printer to new location. it works fine, but there is an error message stating repla...
just moved this printer to new location. it works fine, but there is an error message stating repla...
(Posted by degrofd 11 years ago)
Lexmark E120 Cartridge Or Pc Kit Needed ?
How do Idetermine if I need a toner cartridge or a PC kit ? On the Lexmark E120, it is the same butt...
How do Idetermine if I need a toner cartridge or a PC kit ? On the Lexmark E120, it is the same butt...
(Posted by jsevans00 11 years ago)