Troy-Bilt Bronco CRT Support Question
Troy-Bilt Bronco CRT Support Question
Find answers below for this question about Troy-Bilt Bronco CRT.Need a Troy-Bilt Bronco CRT manual? We have 2 online manuals for this item!
Question posted by carptr50 on August 20th, 2017
I Have A Troy Bilt Lawn Tractor That Won't Start.
I've narrowed it down to the shifter ,forward, neutral, reverse mechcanism, when i wiggle it cranks over . when I shut it off and try to restart I have to wiggle the lever again, only now it won't start
Current Answers
Answer #1: Posted by Odin on August 20th, 2017 11:27 AM
Odin
Member since:
April 10th, 2010 Points: 41,236,670
Member since:
April 10th, 2010 Points: 41,236,670
Hope this is useful. Please don't forget to click the Accept This Answer button if you do accept it. My aim is to provide reliable helpful answers, not just a lot of them. See https://www.helpowl.com/profile/Odin.
Related Troy-Bilt Bronco CRT Manual Pages
Operation Manual - Page 1
... • Operation • Maintenance • Service • Troubleshooting • Warranty
Operator's Manual
Bronco, Super Bronco & Pro-Line CRT Tillers
WARNING
READ AND FOLLOW ALL SAFETY RULES AND INSTRUCTIONS IN THIS MANUAL BEFORE ATTEMPTING TO OPERATE THIS MACHINE.
Printed In USA
TROY-BILT LLC, P.O. BOX 361131 CLEVELAND, OHIO 44136-0019
Form No. 769-07548 (December 13...
Operation Manual - Page 2
... operate the machine, carefully follow the recommended safety practices at all models.
Troy-Bilt's Customer Support telephone numbers, website address and mailing address can be found ... and operation.
Choose from the operating position
The engine manufacturer is relative to Troy-Bilt LLC • P.O.
Failure to operating the equipment. Characteristics and features discussed and...
Operation Manual - Page 24
... TO OBTAIN SERVICE: Warranty service is available, WITH PROOF OF PURCHASE, through Troy-Bilt's authorized channels of export distribution.
The engine or component parts thereof.
No ... consequential loss or damage including, without limitation, expenses incurred for substitute or replacement lawn care services or for use , neglect, accident, improper maintenance, alteration, vandalism,...
Service Manual - Page 1
Product Training and Education Department
FORM NUMBER 769-01529 11/2004 Service Manual
Small Frame Troy-Bilt Tillers
MTD Products LLC -
Service Manual - Page 5
..., and ground it to 6"
• 10" Agricultural Tires
1. Make certain the forward clutch bail is powering the tiller, and refer to follow along with the Troy-Bilt Factory School. ward clutch spring with Serial Number 1B212G80447. Record the forward clutch spring measurement _____.
1 FORWARD CLUTCH CABLE ADJUSTMENT:
2.1. Measure the overall length of the coils on...
Service Manual - Page 6
... assembly in position using a 3/8" wrench and a small adjustable wrench. See Figure 2.14. Measure the overall length of the forward clutch is too short (less than 1/16"), the tension is half way up the adjustment screw.
2.14. Troy-Bilt Small Frame Tillers
2.5. If the second measurement (spring coils extended) of the coils on the...
Service Manual - Page 7
... bracket using a 3/8" wrench and a small adjustable wrench. Tighten the hex jam nut up against the forward clutch cable end using a 3/8" wrench and a small adjustable wrench. See Figure 3.1. Spark Plug
Troy-Bilt Small Frame Tillers
3.2. See Figure 3.4. See Figure 3.2. Forward Clutch Cable
Adjustment Screw
Hex Jam Nut
Figure 3.2
3.3. Spark Plug Boot Grounded
Lower Handle Bracket...
Service Manual - Page 8
.... Forward Idler Lever
Forward Clutch Cable
Clutch Cable
Z Fitting
Hex Jam Nut
Figure 3.5
3.6. Hex Flange Screw
Figure 3.8
3.9.
Loosen the hex jam nut securing the forward clutch cable to the lower cable mounting bracket using a 3/8" socket. Pivot the forward clutch cable's Z fitting rearward, and remove it is out of the lower cable mounting bracket.
3.10. Troy-Bilt Small...
Service Manual - Page 9
... Cover Clutch Cable
Figure 4.4 4.5.
Spark Plug
Troy-Bilt Small Frame Tillers
4.4. Remove the belt from the engine drive pulley and forward idler pulley. Figure 4.5
4.6.
Remove the hex... 4. Install the new belt in the reverse order above. See Figure 4.5. See Figure 4.1. See Figure 4.4. See Figure 4.2. Pivot the belt cover on the forward clutch cable until it to the lower ...
Service Manual - Page 10
... (in the reverse order above.
6 Return Spring
Forward Idler Lever
Clutch Cable
Figure 5.2
5.3. Spark Plug
5.4. See Figure 5.2.
Install a new return spring in the operators position) is out of the return spring from the forward idler lever using needle nosed pliers. Remove the spark plug boot from the right engine bracket using a 3/8" socket. Troy-Bilt Small Frame Tillers...
Service Manual - Page 11
... belt removal, prior to the bottom of the transmission using a 3/8" socket. Troy-Bilt Small Frame Tillers
6. Grasp the upper handlebar and pivot the unit
NOTE: Perform the Drive Belt Replacement sec-
Secure the handlebar from the forward idler lever.
6.4.
Pivot the forward clutch cable's Z fitting rearward, and remove it 's nose. Remove both self tapping hex...
Service Manual - Page 12
... Figure 6.12.
Hood Brackets
Drag Bar
Figure 6.12
NOTE: There is resting on the tines and not on the trailing shield. Depth Regulator Assembly
6.14. Troy-Bilt Small Frame Tillers
6.12.
Service Manual - Page 13
... in position from the right engine bracket using a 1/2" socket. See Figure 6.21. Idler Lever
Right Engine Bracket
Hex Screws
Return Spring
Figure 6.17
6.18.
Grasp the front of hex .... Remove the forward return spring from
above. Self-Tapping Screws
Cable Mounting Bracket
Figure 6.19
NOTE: The unit needs to the transmission using needle nose pliers. Troy-Bilt Small Frame Tillers...
Service Manual - Page 14
... the operators position) is flat on a bench. Remove the transmission assembly from the forward idler lever. The right lower hole (in position from above.
6.26. See Figure 6.24. Remove the forward return spring from between the engine brackets and front assembly. Troy-Bilt Small Frame Tillers
6.24. See Figure 6.26. Remove the hex screw and...
Service Manual - Page 15
...
Hex Screw & Lock Nut
Front Support Washer
Hex Screw
Figure 6.30
6.31.
Forward Lever
2" x 4"
Figure 6.33
6.34. NOTE: Record the orientation of the transmission...forward idler assembly to the transmission housing assembly using a 9/16" socket and wrench. See Figure 6.31.
Hex Screws and Lock Nuts Left and Right Tine Assemblies
11 Transmission Pulley Key
Belleville
Troy-Bilt...
Service Manual - Page 16
... of the wheel shaft using a large flat blade screwdriver. Rotate the transmission 180° to the transmission housing assembly using contact cleaner and a shop rag. Troy-Bilt Small Frame Tillers
6.35. Thoroughly clean the wheel shaft and tine shaft
using a 1/2" socket. Remove both shafts before assembly. Hex Screws
Wheel Shaft
Front Transmission...
Service Manual - Page 17
... transmission housing assembly using a 1/2" socket. See Figure 7.8. See Figure 7.11.
Remove the front transmission cover gasket from the transmission using a scraper. Wheel Worm
Cover Gasket
Troy-Bilt Small Frame Tillers
7.10. Remove the rear transmission cover gasket from the transmission using a punch and hammer.
13
Remove all of the gear oil to...
Service Manual - Page 18
... Shims Figure 7.17
Race Tapered Roller Bearings
Support Washer
Rear
Drive Shaft Assembly Figure 7.22
Front
NOTE: If the front portion of the transmission housing. Troy-Bilt Small Frame Tillers
7.13. See Figure 7.13. NOTE: Use gasket eliminator during assembly.
7.17. Shims
Figure 7.18
7.19. Hold the support washer and front tapered...
Service Manual - Page 19
... Spacer
Wheel Shaft Worm Gear
Figure 7.25
7.26. Open the jaws of a vice and set a section of protective material into the jaws of removal.
7.28.
Troy-Bilt Small Frame Tillers
7.23. Set the transmission assembly into it .
7.30. Remove the front internal snap ring using a flat blade screwdriver. Remove the front tapered...
Service Manual - Page 39
Figure 2.5 2.6. Check the adjustment on last time. 2.8. REVERSE DRIVE BELT REPLACEMENT: 3.1. 2. Pull Out
Troy-Bilt Small Frame Tillers
2.5. Release the reverse clutch cable T-knob. 2.4. Secure the hex jam nuts using the
T-knob. See Figure 3.1. Pivot the belt cover around the forward clutch
cable until the exposed portion of the reverse clutch cable is between the end of...
Similar Questions
Oil Drain Plug
Where is oil drain plug located on troy built super bronco crt rototiller
Where is oil drain plug located on troy built super bronco crt rototiller
(Posted by rdt225 1 month ago)
Troy Bilt 22tb Weed Eater Trouble
Mt Troy-Bilt 2TB Weed Eater has had Bumper and Head replaced 2 times. Both were replaces because Bum...
Mt Troy-Bilt 2TB Weed Eater has had Bumper and Head replaced 2 times. Both were replaces because Bum...
(Posted by denisstpierre1961 1 year ago)
Troy-bilt 31ah64q4711 (2012) Storm 2840 Snowblower Runs Rough & Gas Leak @ Carb
I have a Troy-Bilt 31AH64Q4711 (2012) Storm 2840 Snowblower gas leak @ carb. Removed carb, cleaned t...
I have a Troy-Bilt 31AH64Q4711 (2012) Storm 2840 Snowblower gas leak @ carb. Removed carb, cleaned t...
(Posted by Nborho 6 years ago)
My Troy Bilt Tb225 Tiller Will Not Start.
My tiller ran last week but I cannot get it to run now. I have spark, fresh fuel and I am not sure t...
My tiller ran last week but I cannot get it to run now. I have spark, fresh fuel and I am not sure t...
(Posted by davemcnees 8 years ago)
Where Can I Find Recent Troy-bilt Reviews?
The ratings shown by Troy-Bilt are obviously all very positive. I am looking for reviews and ratings...
The ratings shown by Troy-Bilt are obviously all very positive. I am looking for reviews and ratings...
(Posted by Anonymous-104134 12 years ago)