Singer 44S CLASSIC HEAVY DUTY Support Question
Singer 44S CLASSIC HEAVY DUTY Support Question
Find answers below for this question about Singer 44S CLASSIC HEAVY DUTY.Need a Singer 44S CLASSIC HEAVY DUTY manual? We have 1 online manual for this item!
Question posted by alicegreen35160 on July 16th, 2016
Does My 44s Classic Heavy Duty Sewing Machine Need Oiling?
Can not find in manual.
Current Answers
Answer #1: Posted by waelsaidani1 on July 16th, 2016 8:39 AM
waelsaidani1
Member since:
May 12th, 2013 Points: 19,501,797
Member since:
May 12th, 2013 Points: 19,501,797
Related Singer 44S CLASSIC HEAVY DUTY Manual Pages
Instruction Manual - Page 2
... to SINGER or a service agent to avoid a hazard. 20. Use this sewing machine. Special care is 75dB(A). 17. Always unplug sewing machine from outlet. 15. Do not unplug by persons (including children) with any other user servicing adjustments mentioned in the instruction manual. 11. If the supply cord that they have been given supervision or...
Instruction Manual - Page 6
... Machine Winding the Bobbin...12 Inserting the Bobbin ...14 Threading the Upper Thread...16 Automatic Needle Threader ...18 Raising the Bobbin Thread ...20 Thread Tension ...22
Sewing How... Blind Hem ...36 Sew 1-step Buttonholes ...38 Left and Right Side Balance for Buttonhole ...40 Sewing on Buttons ...42
General Information Installing the Removable Extension Table ...44 Attaching the Presser Foot...
Instruction Manual - Page 9
Reverse sewing lever
11
3
5. Thread cutter
6. Automatic threader 15. Bobbin stopper
11. Thread take-up lever 2
10
4. Presser foot
4
12
7. Three needle position dial
6
10. ...lever
14
15
2 Needle plate cover
8. Pattern selector dial
8
14. Thread tension dial
2. Removable extension table/ accessory storage
5
13
9. EN Principal Parts of the Machine
1.
Instruction Manual - Page 11
EN Principal Parts of the Machine
16. Bobbin winding spindle
16
18. Bobbin thread guide
24. Handwheel
20. Foot speed control 30. Buttonhole stitch balance adjustment slot
18
21. Face plate
...
Instruction Manual - Page 13
... in use . If it does not fit fully in any way. Sewing light
Press main switch (A) to " l " for power and light.
1
IMPORTANT NOTICE
For appliance with a polarized plug (one way. Polarized attachment plug b. EN Connecting Machine to Power Source
Connect the machine to a power source as illustrated. (1) This appliance is equipped with a polarized...
Instruction Manual - Page 15
... of the machine has been pre-set and requires no particular readjustment according to the type of the work. (A)
A The presser foot will remain raised as long as you need to adjust ...settings.
8 EN Two Step Presser Foot Lifter
When sewing several layers or thick fabrics, the presser foot can be raised to a higher position for heavy fabric, tighten by turning the screw counter clockwise,...
Instruction Manual - Page 17
...Edge/ quilting guide g. Bobbin (3x) j. Auxiliary Spool Pin l. they are not supplied with this machine; Blind hem foot s. Even Feed foot w. Zipper foot c. Pack of needles h. Hemmer foot ... from your authorized retailer.) n. Satin stitch foot o. EN Accessories
Standard accessories (1) a. Button sewing foot e. Spool holders i. Spool pin felt m. Overcasting foot p. Darning/ embroidery foot v....
Instruction Manual - Page 19
... is full. (9)
2
- Snap thread into thread guide. (3)
- Push bobbin spindle to the bobbin & then continue winding
until bobbin is in "bobbin winding" position, the machine will not sew and the handwheel turn. Hold thread end securily. (7) 1
- Thread bobbin as illustrated and place on foot control pedal. (8)
- Step on spindle. (5)
- Trim thread close...
Instruction Manual - Page 23
... to spool. (2)
- For small thread spools, place small side of this may cause the
timing to carry out correctly as by not doing so several sewing problems could result.
- Thread tension module by raising the needle to its highest point (1), and continue turning the handwheel* counterclockwise until the needle just slightly...
Instruction Manual - Page 25
... when it away from left to right.
-
Pull the thread through the needle eye. Thread upper tension of machine up to top.
1
- Attention: Turn power switch to its highest position.
- Press lever (A) down as... eye of the needle clamp.
- A C
B D
A
2 18 Set machine to the threading position (B).
- Pass the thread in front of the needle by swinging it is fully lowered.
-
Instruction Manual - Page 29
... to higher number. For all stitch
functions, thread or fabric.
- If the thread is an indication that the upper machine tension is no single tension setting appropriate for all decorative sewing you
do not need to adjust it. EN Thread Tension
Upper thread tension Basic thread tension setting: "4". (1) To increase the tension, turn...
Instruction Manual - Page 31
... the pattern selector dial. (e) Use the stitch length dial (d) to adjust the stitch length as desired. Reverse sewing lever b. Stitch length dial e.
a
b
c d e
a. Pattern selector dial
ABCDE FGH I JK
ABCDE FGH... patterns available on page 34. Use the stitch width dial (c) to sew these stretch patterns is on the machine. Stitches in the bottom row of the diagram are indicated on the ...
Instruction Manual - Page 37
Place the fabric under the presser foot with the fabric edge lined up with the desired seam guide line on the needle plate. (2)
Lower the presser foot lifter, and then step on the foot controller to between 2 and 3.
EN Sewing Straight Stitch
To begin sewing, set the machine for straight stitch. (1)
Set the stitch length to start sewing. (3)
1
2
3
30
Instruction Manual - Page 39
.... (2)
Cutting the Thread
Pull the threads under and behind the presser foot. Sew a few reverse stitches.
EN Reverse Sewing
To secure the beginning and the end of the face plate and into thread cutter (B). A
Release the lever and the machine will sew forward again. (1)
Removing the Work
Turn the handwheel toward you (counterclockwise) to...
Instruction Manual - Page 41
... width dial to the indicator marked "S1". Then, turn the pattern selector dial to " ". Set the stitch length dial to stretch and hardwearing seams. The machine sews two stitches forward and one stitch backwards. Used to add triple reinforcement to "S1". Ric rac stitch is suitable for firm fabrics like denim, corduroy...
Instruction Manual - Page 43
...of the page. Blind hem for firm fabrics. Blind hem for stretch fabrics. Start to sew slowly along the fold, so that the needle drops through the edge of the fold. (2)...lighter weight fabrics, and a wider stitch is completed and press.
2 Note: To make sure the machine settings are normally sewn with a longer stitch length setting.
Blind hems, however, are appropriate for the...
Instruction Manual - Page 45
...to determine this. 3. Sew a test first to " ". Stop the machine when the buttonhole cycle has...sewing buttonholes on the foot (b).) 4. Lower the presser foot and start the machine...heavy thread onto the back end of the buttonhole foot,
PUSH
then bring the two heavy thread ends under the buttonhole foot. Once sewing...heavy thread to " ".
2. Buttonhole stitching is a simple ...
Instruction Manual - Page 49
....
LR
Place the button and fabric under the Button Sewing foot, as needed, according to the distance between the holes of the button and sew. Adjust the stitch width, as illustrated in (3). For...the all purpose foot to the button sewing foot. (2) Set the stitch length to number "3" - Set the machine for straight
a
2
ba b
stitch again, then sew a few securing stitches to check that...
Instruction Manual - Page 55
..., vinyl, upholstery. (Leaves smaller hole than standard large needle.)
Note : 1. For best sewing results always use the same thread in the upper tension and in the upper tension, all ...IMPORTANT: Match needle size to medium).
18 (110)
Heavy woolen, overcoat fabrics, upholstery fabrics, some Heavy duty thread in the bobbin. Medium weight fabrics-cotton, satin, kettlecloth, sailcloth, ...
Instruction Manual - Page 62
...) 2. Remove and reinsert the bobbin case and pull on the fabric while sewing, let the feed dogs pull
the fabric under the foot.
1. Insert a.... 2. Correct the thread tension.
1. Readjust the stitch length. 3.
The machine is wound around the spool holder pin. 6.
Replace the needle.
1. Check...or oil have collected on the hook or needle bar. 2. The bobbin case is ...
Similar Questions
Singer 44s Heavy Duty Sewing Machine
can this machine be installed in a sewing machine cabine
can this machine be installed in a sewing machine cabine
(Posted by Lhcajun2004 3 years ago)
How To Tighten Bottom Tension On Heavy Duty 4411 Machine ?
(Posted by Gabyguyer 8 years ago)