Singer 44S CLASSIC HEAVY DUTY Support Question
Singer 44S CLASSIC HEAVY DUTY Support Question
Find answers below for this question about Singer 44S CLASSIC HEAVY DUTY.Need a Singer 44S CLASSIC HEAVY DUTY manual? We have 1 online manual for this item!
Question posted by Anonymous-173599 on February 12th, 2023
Thread Keeps Breaking
The person who posted this question about this Singer product did not include a detailed explanation. Please use the "Request More Information" button to the right if more details would help you to answer this question.
Current Answers
Answer #1: Posted by SonuKumar on February 12th, 2023 10:01 AM
SonuKumar
Member since:
May 9th, 2021 Points: 16,622,780
Member since:
May 9th, 2021 Points: 16,622,780
Singer 44S CLASSIC HEAVY DUTY Thread Keeps Breaking
https://www.youtube.com/watch?v=be1Obm48L_Q
If your Singer 44S Classic Heavy Duty sewing machine's thread keeps breaking, there could be a few reasons for this:
Needle: Make sure you are using the correct size needle for the fabric you are working with and that the needle is not bent or dull.
Thread tension: Check the thread tension and adjust it if necessary. If the tension is too loose, the thread will break easily.
Bobbin: Make sure the bobbin is inserted correctly and that the thread is winding smoothly and evenly.
Thread path: Check the thread path and make sure there are no kinks or tangles in the thread.
Presser foot pressure: Make sure the presser foot pressure is adjusted correctly. If the pressure is too high, it can cause the thread to break.
Lubrication: Check the machine's oil level and lubricate if necessary. A lack of lubrication can cause friction, which can break the thread.
If the problem persists after trying these steps, it may be a good idea to take the machine to a professional for repair or maintenance.
Please respond to my effort to provide you with the best possible solution by using the "Acceptable Solution" and/or the "Helpful" buttons when the answer has proven to be helpful.
Regards,
Sonu
Your search handyman for all e-support needs!!
Related Singer 44S CLASSIC HEAVY DUTY Manual Pages
Instruction Manual - Page 2
...only for its service agent or a similar qualified person in . 2. Keep ventilation openings of the sewing machine and foot controller free from accumulation of burns, fire, electric
shock,...it is being used as threading needle, changing needle, threading bobbin, or changing presser foot, and the like. 10. Always unplug sewing machine from all controls to break. 9. EN IMPORTANT SAFETY...
Instruction Manual - Page 6
... Power Source...6 Two Step Presser Foot Lifter/ Adjusting Presser Foot Pressure...8 Accessories...10
Threading the Machine Winding the Bobbin...12 Inserting the Bobbin ...14 Threading the Upper Thread...16 Automatic Needle Threader ...18 Raising the Bobbin Thread ...20 Thread Tension ...22
Sewing How to Choose Your Pattern...24 Three Needle Position Dial ...26 Stitch Width Dial & Stitch...
Instruction Manual - Page 9
... dial
2. Presser foot
4
12
7. Three needle position dial
6
10. Stitch length dial
13. Thread take-up lever 2
10
4. Pattern selector dial
8
14. Removable extension table/ accessory storage
5
13
9. Stitch width dial
7
12. Reverse sewing lever
11
3
5. EN Principal Parts of the Machine
1. Presser foot pressure adjustment
1
9
3. Automatic threader 15.
Instruction Manual - Page 11
... spool pin
17
19. Handwheel
20. Bobbin thread guide
24. Drop feed control
29. Foot speed control 30. Presser foot lifter 22
28. Power and light switch 19
22. Power cord
4
23 24 25 26 27
29 30
28 EN Principal Parts of the Machine
16. Face plate
20
26. Bobbin winding...
Instruction Manual - Page 13
... a.
Do not modify the plug in the outlet, reverse the plug. Polarized attachment plug b. Sewing light
Press main switch (A) to " l " for power and light.
1
IMPORTANT NOTICE
For ...regulates the sewing speed. (3)
Attention: Consult a qualified electrician if in a polarized outlet only one blade is wider
than the other). EN Connecting Machine to Power Source
Connect the machine to a...
Instruction Manual - Page 15
...adjusting screw with a coin.
Adjusting Presser Foot Pressure
The presser foot pressure of the machine has been pre-set and requires no particular readjustment according to the type of the ... settings.
8 EN Two Step Presser Foot Lifter
When sewing several layers or thick fabrics, the presser foot can be raised to a higher position for heavy fabric, tighten by turning it clockwise. As soon as...
Instruction Manual - Page 17
...
006172008 006907008
006900008
006813008
006904008
s
t
u
v
w
006916008 006917008
006016008
0061850081
10 Seam ripper/ brush f. they are not supplied with this machine; Overcasting foot p. Darning/ embroidery foot v. Button sewing foot e. Even Feed foot w. Edge/ quilting guide g. L-screwdriver k. Hemmer foot q. Blind hem foot s. Zipper foot c. Bobbin (3x) j. Quilting...
Instruction Manual - Page 19
... the bobbin & then continue winding
until bobbin is in "bobbin winding" position, the machine will not sew and the handwheel turn. To start sewing, push the bobbin winder spindle to right. (6)
- Hold thread end securily. (7) 1
- Trim thread close to spool pin. (1/2)
- Wind thread clockwise around bobbin winder tension discs. (4)
- Push bobbin spindle to the left (10...
Instruction Manual - Page 23
... Draw thread from spool through the upper thread guide (3) and pulling thread through the slotted eye of this movement pass thread from ...helpful to hold the thread between the tension discs.
- Now pass the thread behind the horizontal thread guide, and then behind...the presser foot to descend. EN Threading the Upper Thread
This is a simple operation but it is important to carry out...
Instruction Manual - Page 25
... needle around the hook (D) from bottom to the resting position.
- Pull the thread through the needle eye. The threader automtically swings to off ("O")!
Press lever (A) down as far as it is fully lowered.
- Pass the thread in front of machine up to top.
1
- Thread upper tension of the needle clamp.
- EN Automatic Needle Threader
-
Instruction Manual - Page 29
...of fabric. There is an indication that the upper machine tension is important for straight stitch sewing.
- For zig zag and decorative sewing stitch functions, thread
tension should generally be between "3" and "5". Normal thread tension for straight stitch sewing. A
B
- Thread tension too loose for zig zag and decorative sewing. Lower thread tension
1
The bobbin tension has been set...
Instruction Manual - Page 31
...page 28. Instructions for the project.
The pattern selector dial may be found on the machine.
Stitch length dial e. Stitches in the top of the stitch as desired for setting ...of the diagram are indicated on the pattern selector dial in either direction. a
b
c d e
a. Reverse sewing lever b. Stitch width dial d. Pattern selector dial
ABCDE FGH I JK
ABCDE FGH I JK
S1
24 Stitches ...
Instruction Manual - Page 35
...
the number the closer, or denser the stitches will decrease as the dial approaches "4". Generally speaking, use a longer stitch length when sewing heavier weight fabrics or when using a finer needle or thread.
- EN Stitch Width Dial & Stitch Length Dial
Function of stitch width dial When doing a zig zag or a decorative pattern you...
Instruction Manual - Page 37
Place the fabric under the presser foot with the fabric edge lined up with the desired seam guide line on the needle plate. (2)
Lower the presser foot lifter, and then step on the foot controller to between 2 and 3. EN Sewing Straight Stitch
To begin sewing, set the machine for straight stitch. (1)
Set the stitch length to start sewing. (3)
1
2
3
30
Instruction Manual - Page 39
.... A
Release the lever and the machine will sew forward again. (1)
Removing the Work
Turn the handwheel toward you (counterclockwise) to bring
the thread take up lever to cut. (3)
32
B 3
EN Reverse Sewing
To secure the beginning and the end of the face plate and into thread cutter (B). Guide the threads to the side of a seam, press...
Instruction Manual - Page 41
... several stretch patterns, here are indicated with a blue color on the pattern selector dial. Set the stitch width dial to stretch and hardwearing seams. The machine sews two stitches forward and one stitch backwards. Used to add triple reinforcement to "1". Then, turn the pattern selector dial to " ". Ric Rac (2) Set the pattern...
Instruction Manual - Page 43
... of the folded fabric.
Generally, a narrower stitch is used for the fabric. Start to make blind hem sewing even easier, use a blind hem foot, available from your SINGER® retailer. (See page 10 for ... a wider stitch is completed and press.
2 Note: To make sure the machine settings are normally sewn with
the top edge of the hem extending about 7 mm (1/4") to the desired width and...
Instruction Manual - Page 45
... heavy thread onto the back end of the buttonhole foot,
PUSH
then bring the two heavy thread ends under the buttonhole foot. Once sewing is completed, gently pull the heavy thread to... 1. Lower the presser foot and start the machine. 7. Set stitch length dial to determine this. 3. While lightly holding the upper thread, start sewing.
*Set the stitch width to always make ...
Instruction Manual - Page 55
...-polyesters, interlocks, tricot, single and double knits. For best sewing results always use the same thread in the upper tension and in the bobbin. Replace needle often (...Leather needles. 12 (80) to medium).
18 (110)
Heavy woolen, overcoat fabrics, upholstery fabrics, some Heavy duty thread in cotton, polyester or cotton wrapped interlocks, cotton knits, tricots, jerseys, crepes...
Instruction Manual - Page 62
... the thread from the bobbin area.
55 The wrong foot is too thick for the fabric. 4. Select the correct foot.
1. The thread should pull easily.
2. Select a finer needle. 2. Do not pull on the fabric while sewing, let the feed dogs pull
the fabric under the foot.
1. EN Troubleshooting Guide
Problem Upper thread breaks
Lower thread breaks
Cause...
Similar Questions
Why Does My Thread Keep Breaking After About Fifty Stiches
(Posted by Colleencomerford117 2 years ago)
Singer 44s Heavy Duty Sewing Machine
can this machine be installed in a sewing machine cabine
can this machine be installed in a sewing machine cabine
(Posted by Lhcajun2004 3 years ago)
Does My 44s Classic Heavy Duty Sewing Machine Need Oiling?
Can not find in manual.
Can not find in manual.
(Posted by alicegreen35160 7 years ago)
Thread Keeps Breaking?
Thread keeps breaking on my singer 8500q, sets code 06 or 05!
Thread keeps breaking on my singer 8500q, sets code 06 or 05!
(Posted by brendajcarruth 8 years ago)