Ryobi BD4600 Support Question
Ryobi BD4600 Support Question
Find answers below for this question about Ryobi BD4600.Need a Ryobi BD4600 manual? We have 1 online manual for this item!
Question posted by a1gyrine on July 29th, 2021
Owners Manual
I'm trying to find an owners manual for the BD4600 bench belt sander.
Current Answers
Answer #1: Posted by freginold on July 29th, 2021 5:59 PM
freginold
Member since:
December 20th, 2011 Points: 23,253,885
Member since:
December 20th, 2011 Points: 23,253,885
You can view or download the owner's manual here:
https://usermanual.wiki/Ryobi/RyobiBd4600OwnerSManual.117051278.pdf
and the parts list here:
http://www.m-and-d.com/pdfs/ryobi_tool/BD4600.pdf
https://usermanual.wiki/Ryobi/RyobiBd4600OwnerSManual.117051278.pdf
and the parts list here:
http://www.m-and-d.com/pdfs/ryobi_tool/BD4600.pdf
Answer #2: Posted by nanzy on July 29th, 2021 5:47 PM
nanzy
Member since:
May 26th, 2021 Points: 110,250
Member since:
May 26th, 2021 Points: 110,250
Answer #3: Posted by SonuKumar on July 30th, 2021 12:22 AM
SonuKumar
Member since:
May 9th, 2021 Points: 16,622,780
Member since:
May 9th, 2021 Points: 16,622,780
https://www.manualslib.com/manual/376482/Ryobi-Bd4600.html
https://usermanual.wiki/Ryobi/RyobiBd4600OwnerSManual.117051278.pdf
Please respond to my effort to provide you with the best possible solution by using the "Acceptable Solution" and/or the "Helpful" buttons when the answer has proven to be helpful.
Regards,
Sonu
Your search handyman for all e-support needs!!
Related Ryobi BD4600 Manual Pages
English Manual - Page 1
OPERATOR'S MANUAL
Belt/disc sander
BD4600
4 x36
Your belt/disc sander has been engineered and manufactured to our high standard for your purchase. WARNING: To reduce the risk of operation, and operator safety.
Thank you years of rugged, trouble-free performance.
SAVE THIS MANUAL FOR FUTURE REFERENCE When properly cared for, it will give you for dependability, ease...
English Manual - Page 2
...DAY EXCHANGE POLICY One World Technologies, Inc., warrants its RYOBI® power tools with the original product. makes no warranties, representations or promises as to the...have other than those specifically stated in this warranty or you . warranty
RYOBI® POWER TOOL - This warranty only covers defects arising under state law, including warranties of merchantability or ...
English Manual - Page 3
...benches invite accidents. All visitors should be properly repaired or replaced by preventing body contact with sufficient set. Do not force the tool...Read and understand all times.
MAINTAIN TOOLS WITH CARE. Everyday eyeglasses have repaired by a qualified service technician at all instructions. Consult the operator's manual for best and safest performance. Check for which...
English Manual - Page 4
... TURN OFF THE SANDER before connecting to a workbench or table at approximately hip height.
never stand or have any work using this tool, loan them to power supply. ALWAYS REMEMBER that are included with large, very small or awkward workpieces.
Never use drums, sanding sleeves or belts which show visual signs...
English Manual - Page 5
... reduce the risk of injury, user must read and understand operator's manual before using this tool. Failure to operate the tool better and safer. SYMBOLS
Some of the following symbols may be used... surface speed, orbits etc., per minute
Wet Conditions Alert
Do not expose to turn the belt/disc sander ON or OFF. Please study them and learn their meaning.
Always wear safety goggles or ...
English Manual - Page 6
...we suggest you do not understand the warnings and instructions in the operator's manual, do not attempt to use only identical replacement parts. We recommend Wide ...this product. Before beginning power tool operation, always wear safety goggles or safety glasses with this product until you read thoroughly and understand completely the operator's manual. SYMBOL SIGNAL
MEANING
DANGER:...
English Manual - Page 7
...with a qualified electrician or service personnel if the grounding instructions are working area. Before using a power tool at a considerable distance from the power source, use on 12 gauge - 20 amp circuit. If ...in a shop is approximately 1,900 SFM.
Never use . SPEED AND WIRING
The belt speed of electric shock. This speed is properly installed and grounded in serious injury....
English Manual - Page 8
...well away from the face of the workpiece pushed into the blade or being dropped into the tool first.
As it securely against the table or fence during a ripping operation. Set The distance...operation. Kerf The material removed by the blade in a through or partial cut which a blade or cutting tool is being guided by the blade in a non-through cut or the slot produced by a fence, miter...
English Manual - Page 9
... KEY
SANDING DISC
horizontal and vertical position holes
Fig. 2
Know Your BELT/DISC SANDER
See Figure 2.
Disc Speed 3,600 r/min. (RPM)
Table Size 8-1/2 in .
Belt Speed 1,900 SFM Belt Tilt 0°- 90° Disc Size 6 in .
The safe use of this operator's manual as well as a knowledge of the project you are used for sanding...
English Manual - Page 10
... unauthorized and possible hazardous use , turn ON. Store
key in serious personal injury. TO TURN THE BELT/DISC SANDER ON: With the switch key inserted into the power source. Contact with the belt before plugging tool into the switch, lift the switch
button to turn the switch OFF and remove the switch key...
English Manual - Page 11
... any parts are damaged or missing, please call 1-800-525-2579 for use with the tool:
n Sanding Disc n Disc Guard n Phillips Screws (2) n Socket Head Screws, M8 x 12 (2) n Washers (2)
n Miter Gauge n Hex Key n Worktable n Work Support n Operator's Manual (not shown)
DISC GUARD
MITER GAUGE
WORK SUPPORT
SANDING DISC
socket head screws
PHILLIPS SCREWS...
English Manual - Page 12
... the worktable no farther than 1/16 in . installing/REPLACING sanding belt
See Figure 7. n Place the sanding belt over the drive roller and idler roller
with the belt sander
See Figure 9. NOTE: The belt tension lever is centered on both drums. n Push the belt tension lever back into the hole as shown in the direction of the...
English Manual - Page 13
...
C-CLAMPS 13
Fig. 10
4 x36
mounting bolt
LOCK WASHER HEX NUT
Fig. 11
4 x36
MOUNTING BOARD
Fig. 12
If the belt/disc sander is to be inserted from the underside of the tool housing.
n Using a hex key, fasten in place with a 3/4 in the base as a template for hole pattern.
NOTE: All bolts should...
English Manual - Page 14
... END SURFACES USING THE MITER GAUGE
See Figure 14. A miter gauge is included with the tool for sanding small end surfaces on the sanding disc. OR LESS TABLE LOCK KNOB
45 0 15... in possible serious injury. OPERATION
WARNING:
Do not allow familiarity with side shields when operating power tools.
Failure to do so could cause the workpiece to inflict serious injury. tion materials n Bevel ...
English Manual - Page 15
The belt/disc sander can be adjusted using the sanding disc and moving the work evenly across the sanding belt. Loosen the screws by retightening the screws.
n Lock the sanding belt by turning them counterclockwise. n Keep the end pressed firmly against the sanding disc moving work evenly on the workpiece, the work evenly across the...
English Manual - Page 16
.... n Adjust worktable square to the sanding disc. n Unplug the belt/disc sander. SQUARING THE WORKTABLE to slide off the idler drum or drive drum, the belt is not 90° with the sanding belt. adjustments
WARNING:
Before performing any adjustment, make sure the tool is unplugged from the disc, turn the
tracking knob counterclockwise 1/4 turn...
English Manual - Page 17
... are highly abrasive to remove dirt, dust, oil, grease, etc. n Remove the old drive belt. n Adjust the motor bracket so that could cause possible serious personal injury, turn off the tool, remove the switch key, and unplug the belt sander before performing any of any time let brake fluids, gasoline, petroleumbased products, penetrating oils...
English Manual - Page 18
...; arsenic and chromium from these exposures varies, depending on how often you do this tool will be found on a plate attached to filter out microscopic particles.
• SERVICE... SC 29625 Phone 1-800-525-2579 www.ryobitools.com
18
AND SERIAL NO. OPERATOR'S MANUAL
Belt/disc sander
BD4600
WARNING:
Some dust created by power sanding, sawing, grinding, drilling, and other construction ...
Similar Questions
I Have A P741 Has Always Worked Great Went To Turn On No Audio Except Auxiliary
(Posted by fzysduppw 2 years ago)
Ryobi Bd4600 Belt And Disk Sander
Put new bearing in motor, reasembaled complete belt disk sander, checked wiring with diagram turn sw...
Put new bearing in motor, reasembaled complete belt disk sander, checked wiring with diagram turn sw...
(Posted by willie4barbp 8 years ago)
Bt3000 Part No. 44
part 44 hex bolt vibrated out. how do i gain access to replace it
part 44 hex bolt vibrated out. how do i gain access to replace it
(Posted by carlsr1581 8 years ago)
Bd4600 Belt Sander Switch
I have had to replace the Starter switch and did take note of the wiring
I have had to replace the Starter switch and did take note of the wiring
(Posted by rdley 11 years ago)