JVC EM32T Support Question
Find answers below for this question about JVC EM32T.Need a JVC EM32T manual? We have 1 online manual for this item!
Question posted by Anonymous-165865 on December 14th, 2019
Jvc Em32t Not Working
I have a JVC EM32T - was working fine, display went out about a week ago. I purchased a brand new LED LCD Main Video Board Motherboard. The motherboard came in today and the tv still isn't working. I have a white power light (I believe it use to be red)... and still no display. I've double checked all the connectors and the ribbon and everything is attached normal. Please HelpAllen
Current Answers
Answer #1: Posted by Odin on December 14th, 2019 6:29 PM
Step 1
Cycle through the TV's video inputs to verify that your TV is set to the right one. For instance, if you are attempting to use a digital cable converter box that is plugged into the Video 1 input and the TV is set to a Video 2 input that has nothing plugged into it, the TV will not display any picture or sound. To cycle through the inputs, use the input selection button, typically labeled "input," "source," "TV/video" or the like.
Step 2
Reseat the video and audio input connections to verify that a loose cable is not causing the TV's loss of signal. If you have a coaxial cable connected from your wall cable jack directly into the TV, it may have come loose thereby eliminating all picture and sound on the TV. Locate the connection cable or cables of whatever device you're attempting to watch, and unplug/replug them from where they plug into the TV.
Step 3
If the above does not solve, look in your manual for instructions for a hard reset.
* * * *
If the problem persists (or if you require further explanation), you'll have to obtain a walk-through from JVC: use the contact information at https://www.contacthelp.com/jvc/customer-service..
Cycle through the TV's video inputs to verify that your TV is set to the right one. For instance, if you are attempting to use a digital cable converter box that is plugged into the Video 1 input and the TV is set to a Video 2 input that has nothing plugged into it, the TV will not display any picture or sound. To cycle through the inputs, use the input selection button, typically labeled "input," "source," "TV/video" or the like.
Step 2
Reseat the video and audio input connections to verify that a loose cable is not causing the TV's loss of signal. If you have a coaxial cable connected from your wall cable jack directly into the TV, it may have come loose thereby eliminating all picture and sound on the TV. Locate the connection cable or cables of whatever device you're attempting to watch, and unplug/replug them from where they plug into the TV.
Step 3
If the above does not solve, look in your manual for instructions for a hard reset.
* * * *
If the problem persists (or if you require further explanation), you'll have to obtain a walk-through from JVC: use the contact information at https://www.contacthelp.com/jvc/customer-service..
Hope this is useful. Please don't forget to click the Accept This Answer button if you do accept it. My aim is to provide reliable helpful answers, not just a lot of them. See https://www.helpowl.com/profile/Odin.
Related JVC EM32T Manual Pages
JVC Knowledge Base Results
We have determined that the information below may contain an answer to this question. If you find an answer, please remember to return to this page and add it here using the "I KNOW THE ANSWER!" button above. It's that easy to earn points!-
FAQ - Mobile Navigation/KV-PX9 eAVINU
... can be transferred. To check free HDD space you chose to do not work with tall buildings, mountain path and highway overpass. SD card can be separately purchased from or write to SD...video/stills playback is a audio output only (PHONES). It may still work in navigation mode when using SD cards up with this unit? KVPX9 power MUST be played? If you will not work when a new... -
FAQ - Mobile Navigation/KV-PX9 eAVINU
... or the help in "USER MANUALS" link on map screen has been fixed.*** Version 1.023 as follows: Map data are stored in red, why? There is no input connector. KVPX9 will only playback files stored on , GPS signal fluctuate for 15 minutes, power is turned off . Because of other . To delete those updates check the... -
FAQ - Televisions/LCD
...-] and [Power] button on the TV's Side Panel, press and hold both the [Menu] [Vol-] buttons. 5. While holding (for more details: On the other hand if you may begin normal use . Confirm that static images like certain video games, TV input name or channel number, clock, stock market report bars, shopping channels pricing displays and similar...
Similar Questions
Jvc Shows On Screen And Goes Away. Tv Will Not Do Anything Else
(Posted by alexalexalilly 3 years ago)
Tv Power Lights Are Not Turning On
Whenever I plug in the cord the lights aren't turning on. What is the problem?
Whenever I plug in the cord the lights aren't turning on. What is the problem?
(Posted by jphenry12345 5 years ago)
Can Jvc Lt-22de72 Work In India Purchased From New York
(Posted by pprabhakar25 11 years ago)
How To Fix My 1999 Jvc Telivision The Red Power Light Keeps Blinking
The red power light starts blinking then the TV syops working
The red power light starts blinking then the TV syops working
(Posted by RubenBorgella 11 years ago)