Icom MA-500TR Support Question
Icom MA-500TR Support Question
Find answers below for this question about Icom MA-500TR.Need a Icom MA-500TR manual? We have 1 online manual for this item!
Question posted by kapiteinaddy on November 16th, 2015
Cloning Cable Ma-500tr
Cloning Cable Ma-500tr is The Cable Made For Give Data Ais To Pcand The Cable Wurk Olso With Open Cpn wat Cloning Cable I Need For This Please Wat Tipe I Can Usethanks
Current Answers
Answer #1: Posted by TommyKervz on November 22nd, 2015 6:54 AM
TommyKervz
Member since:
January 10th, 2013 Points: 17,776,823
Member since:
January 10th, 2013 Points: 17,776,823
See the image below. You can buy this cable at any Icom electronic local store or any other Icom authorized dealers at your area.
Supporting Image
You can click the image below to enlarge
Related Icom MA-500TR Manual Pages
Instruction Manual - Page 1
INSTRUCTION MANUAL
CLASS B AIS TRANSPONDER
MA-500TR
This device complies with Part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference.
Instruction Manual - Page 2
FOREWORD
Thank you for the MA-500TR. Many hours of research and development went into the design of the corresponding transceiver.
EXPLICIT DEFINITIONS
WORD RWARNING! If disregarded, inconvenience only. i
IMPORTANT
READ ALL INSTRUCTIONS carefully and completely
before using the transponder.
CAUTION NOTE
DEFINITION
Personal injury, fire hazard or electric shock may become inoperable ...
Instruction Manual - Page 3
... that to which can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
MXG-5000 (Referred to...help.
ii However, there is included with MA-500TR. Please read it before installing and operating the MXG-5000. DC power cable (OPC-2059)
NMEA connector cable (OPC-2014) • T he OPC...
Instruction Manual - Page 4
...ASSUMING THE MAXIMUM POWER OF THE RADIO AND ANTENNAS WITH A MAXIMUM GAIN OF 9dBi ARE USED FOR A VESSEL MOUNTED SYSTEM. The MPE Radius is appropriate for Radio Frequency Exposure. Do not transmit ...THE FCC.
For watercraft without suitable structures, the antenna must be mounted so as driver or radio operator) are within the MPE radius of the antenna, unless such persons (such as to ...
Instruction Manual - Page 5
...should be at least 5 meters above ground (or accessible) level. Some radio licenses will require that you have a lower 'average' output power and the perceived risk is even lower.
1
CE versions of the MA-500TR which display
2
the "CE" symbol on the transmitter being activated for...2 watts.
The maximum RF power available from this equipment should neither be made in the country of use.
Instruction Manual - Page 6
...OF CONFORMITY
We Icom Inc.
Kind of equipment: CLASS B AIS TRANSPONDER
Type-designation: ma- 500tr
Version (where applicable): This compliance is based on our sole ...A11ɿ2009 vi) vii) viii)
0560
Bad Soden 2nd Dec. 2010 Place and date of the Radio and Telecommunications Terminal Equipment Directive, 1999/5/EC, and that any applicable Essential Test Suite measurements have been performed...
Instruction Manual - Page 7
... polarity. BE CAREFUL! BE CAREFUL! The transponder meets IPX7* require-
ments for the DC power and cloning cable connectors.
Icom is used with equipment that is designed for long periods of more than 16 V DC or use harsh solvents such as benzine or alcohol
when cleaning, as the dashboard. and the Icom logo are...
Instruction Manual - Page 8
TABLE OF CONTENTS
FOREWORD i IMPORTANT i EXPLICIT DEFINITIONS i FCC INFORMATION ii SUPPLIED ACCESSORIES ii RADIO OPERATOR WARNING iii ABOUT CE iv PRECAUTIONS vi TABLE OF CONTENTS vii 1 OVERVIEW 1 2 PANEL DESCRIPTION 2-6
■ Front panel 2 ■ Function display 4 3 PREPARATION 7-13 ■ MMSI ...
Instruction Manual - Page 9
... name, MMSI code, vessel type, position data, speed, course, destination and more. Other vessel
(Class B AIS)
Other vessel
(Class A AIS)
Vessel information
Your vessel
(Class B AIS)
Base Station
D AIS Classes
1
There are installed on the VHF maritime mobile band. An AIS transponder is a short range data radio unit, used primarily for "Automatic Identification System." The information...
Instruction Manual - Page 10
...; A target box will appear around the selected target or waypoint
icon.
➥ P ush [Ω] to sort the AIS target data by CPA (Closest
Point of Approach). (p. 17) ➥ P ush [≈] to sort the AIS target data by TCPA (Time to exit it is set ; thest from your vessel (or waypoint, if it is set...
Instruction Manual - Page 11
...1 second to turn the power ON or OFF. (p. 14)
• After turning ON the power, the opening screen will appear. ➥ P ush to show the display backlight and contrast adjusting screen. (p. 15)
o... KEY [ENT] ➥ P ush to display the detail screen of the selected AIS target. (pp. 15−17) ➥ P ush to save the input data. (pp. 8, 10, 15) ➥ P ush to enter the Menu item...
Instruction Manual - Page 12
...transponder detects a transmit signal. • "BASE STATION INHIBITING AIS TX FOR MM MIN"* is displayed when the transmission is ...vessel to the selected AIS target. ➥ S hows the CPA (Closest Point of Approach) information of the selected AIS target whose CPA is... AIS target. ➥ S hows TCPA information of the selected AIS target whose CPA is within 60 minutes of the AIS targets...
Instruction Manual - Page 13
... points in the direction you are selectable.
1
• Description of the icons
2
Icon
Description
3
AIS target: Vessel
4
The tip of the target triangle automatically points
5
in sequence. (p. 15)
•... to display the detail
screen of time has passed since the vessel last transmitted 15
data. (p. 27)
16
The "Lost target" icon disappears from the plotter display 6
...
Instruction Manual - Page 37
... data can a new Slow
Warn or regular alarm sound, depending on the display, and
the alarm buzzer sounds* repeatedly when an AIS...data of a vessel that vessel's COG is at anchor or drifting come into your vessel and an alarm will sound again. MENU MODE OPERATION 6
D CPA/TCPA
• Alarm You can also turn the collision alarm function ON or OFF.
If a vessel is anchored in the same way...
Instruction Manual - Page 43
...using the RAIM function.
10
• T he external GPS antenna must be installed within
26 m (85.3 ft) of the internal GPS antenna.
11
12
CAUTION: After connecting the DC power cable and 13
NMEA connector cable leads, cover the cable and leads 14
with other AIS... to receive position data and
transmit it . w e
q
r
y t
q CLONING CABLE CONNECTOR Connects the cloning cable from the vessel's...
Instruction Manual - Page 44
... to 15.
36 D High-density D-sub 15 pin assignment
trewq
!0 o i u y !5 !4 !3 !2 !1
Rear panel view
NOTE: The OPC-2014 nmea connector cable has 15 leads, numbered 1 to prevent electrical shocks
and interference from other equipment occurring. Use a self-tapping screw (3 × 8 mm). y ANTENNA CONNECTOR Connects to a marine VHF antenna with a PL-259 connector for...
Instruction Manual - Page 45
... speed (baud rate) is set in "AIS Output." (p. 12)
37
7 INSTALLATION AND CONNECTIONS
1
2
PIN No.
Connects to a GPS receiver. (p. 39)
6
The data communication speed (baud rate) can RMC, GGA, VTG, GSA, GSV, be selected between 4800 bps (IEC61162-1) and
7
5 NMEA1 IN (+)
: Less than 2 mA (at 2 V applied)
GBS†, DTM, GNS, GLL
38400 bps...
Instruction Manual - Page 46
... at least 3 m (9.85 ft.) away from interference as possible. - Be sure the location is installed in the DC power cable.
VHF AIS antenna VHF radio antenna
At least 3 m (9.85 ft.)
38 Mount the VHF AIS/radio antennas as high as possible, for the best reception and transmission. 7 INSTALLATION AND CONNECTIONS
■ Fuse replacement
One fuse...
Instruction Manual - Page 47
...or higher.
10
*2 Requires the first two digits of the serial number to the AIS target using the transponder without entering the target's MMSI code. (p. 22)
4
See the leaflet...the transponder and a transceiver using the
2
OPC-2014 nmea connector cable. 7 INSTALLATION AND CONNECTIONS
• Antenna connector The antenna uses a PL-259 connector.
Strip the cable jacket and tin the shield...
Instruction Manual - Page 50
... to the transponder's body.
42
y
Locking nut t
End bolt u C onnect the antenna, power cable, GPS receiver and
OPC-2014, then return the instrument control panel to its original place.
KEEP the transponder...panel (or wherever you plan to a flat surface, such as an instrument panel. q Using the template on either side of the instrument control panel.
7 INSTALLATION AND CONNECTIONS
■...
Similar Questions
Ma500tr
how is it possible to get service manual of ma500tr in free of charge
how is it possible to get service manual of ma500tr in free of charge
(Posted by sanginan 2 years ago)
How S It Possible To Get Service Manual Of Ma-500tr Free
Hi dear i need service manual ofMA-500TR for fix & repair in free,so pls help me in order to obt...
Hi dear i need service manual ofMA-500TR for fix & repair in free,so pls help me in order to obt...
(Posted by abdoulali 2 years ago)
Can't Transmit
i have problem with my ais MA-500TR, cannot transmit, in diagnostic mode read "TX NG"... can anybody...
i have problem with my ais MA-500TR, cannot transmit, in diagnostic mode read "TX NG"... can anybody...
(Posted by pamadicah 5 years ago)
Radio Won't Work With Front Panel Connected Via Separation Cable
Radio workd perfectly fine when front panel is attached to the main body. Once pulled out and connec...
Radio workd perfectly fine when front panel is attached to the main body. Once pulled out and connec...
(Posted by icohen74011 8 years ago)