TP-Link TL-WA500G Support Question
TP-Link TL-WA500G Support Question
Find answers below for this question about TP-Link TL-WA500G.Need a TP-Link TL-WA500G manual? We have 1 online manual for this item!
Question posted by onlinezindgi on January 27th, 2013
Tl-wa 500 G Configuration In Windows 7
how to config TL-WA 500 G device on repeater mode in windows 7. does any one can help
Current Answers
Answer #1: Posted by tintinb on January 27th, 2013 7:23 PM
tintinb
Member since:
October 26th, 2012 Points: 7,056,560
Member since:
October 26th, 2012 Points: 7,056,560
In order to configure your TP-Link TL-WA500G device, you must first install the driver software for this device. If you do not have the driver software, you can download it here:
- http://www.nodevice.com/driver/TL-WA500G/get84765.html
- http://drivers.softpedia.com/get/FIRMWARE/TP-LINK/TP-LINK-TL-WA500G-Access-Point-Firmware-V1-110310-Beta.shtml
- http://www.driverowl.com/p/TP-Link/TL-WA500G/Driver/103496
The rest of the instructions is provided in the user's manual of the device. The user's manual can be found here:
If you have more questions, please don't hesitate to ask here at HelpOwl. Experts here are always willing to answer your questions to the best of our knowledge and expertise.
Regards,
Tintin
Related TP-Link TL-WA500G Manual Pages
User Guide - Page 9
... you to access the AP.
TL-WA500G 54M Wireless Access Point User Guide
Overview of LEDs, ports and buttons on to the web-based management page.
4.2 Status:
Gives information about the AP's current configuration.
4.3 Network:
Tells how to configure the IP parameters of the wireless network.
2.2 Basic Requirement:
Introduces some advanced configurations for your PC in order...
User Guide - Page 10
... well as advanced Firewall protections, the TL-WA500G Wireless Access Point delivers complete data privacy. TL-WA500G 54M Wireless Access Point User Guide
Chapter 1 Introduction
Thank you to connect the wireless devices to a wired environment. Even though you may not be familiar with the Access Point, you can easily configure it with the help of cabling will be beneficial for...
User Guide - Page 16
... configure the IP address as 192.168.1.* (* is any integer between 1 to 253), the Subnet mask as 255.255.255.0, and the Default gateway as Figure 3-2 below . On the My Network Connections window ...and
choose Properties. TL-WA500G 54M Wireless Access Point User Guide
Chapter 3 Configure PC
This chapter will guide you to configure your PC to the LAN ports on the AP and configure the IP address ...
User Guide - Page 17
Figure 3-3 4. Configure the IP address manually.
10
In the General tab of Internet Protocol (TCP/IP) Properties window, highlight Internet
Protocol (TCP/IP) and click Properties. TL-WA500G 54M Wireless Access Point User Guide
Figure 3-2 3.
User Guide - Page 18
....
If the result displayed is in the filed and click Ok. Verify the network connection between 1 to keep your settings. Enter cmd in Windows XP Operating System. TL-WA500G 54M Wireless Access Point User Guide a) Select Use the following example is similar to that displays and then press Enter. b) Type ping 192.168.1.254...
User Guide - Page 19
...configured. The LED of LAN port which you link
to see if your PC's adapter should be within the range of 192.168.1.1 ~ 192.168.1.253.
12 Make sure the TCP/IP for your PC has not connected to the AP. Figure 3-6 Please check following these steps: 1). Check to on the device... and the LED on your PC and the AP are right connected. TL-WA500G 54M Wireless Access Point User ...
User Guide - Page 20
... field of the main menus. Go to Tools menu>Internet Options>Connections>LAN Settings, in the screen that your web-browser has been set to configure your web browser. TL-WA500G 54M Wireless Access Point User Guide
Chapter 4 Configure the Device
This Chapter describes how to a proxy.
User Guide - Page 22
...:
If you change the IP Address, you to configure the IP parameters of Network on this page. Enter the IP address of the network. Figure 4-4 Network ¾ Type - An address code that determines the size of your IP address. ¾ MAC Address - TL-WA500G 54M Wireless Access Point User Guide
4.3 Network
The Network option...
User Guide - Page 23
... explanations for each device's MAC address). TL-WA500G 54M Wireless Access Point User Guide
4.4 Wireless
The Wireless option, improving functionality and performance for wireless network, can help you can secure your data and provide greater security for your wireless network. For example, TEST is case-sensitive. Determines the operating frequency to configure the basic settings...
User Guide - Page 26
... the Enable WDS (Wireless Distribution System) box will connect to AP according to MAC address.
¾ Repeater - The Client mode allows one or more remote LANs to access. • Enable SSID Broadcast - Configure the Operating Mode of the TL-WA500G Access Points.
• Configure AP1 on LAN Segment 1 in Access Point mode. • Configure AP2 in Repeater mode with the MAC address...
User Guide - Page 27
... across the LANs. Also, you add Repeaters to -Point Bridge mode. Configure the TL-WA500G (AP1) on LAN Segment 2 in repeater mode. Configure the TL-WA500G (AP2) on LAN Segment 1 in Bridge (Point to Point) - A computer on any LAN segment should be able to
connect to the Internet or share files and printers with wireless antenna accessories. ¾ Bridge (Point to...
User Guide - Page 28
... connect two or more wired LANs. The MAC addresses of AP2 and AP3 are required in AP1.
• Configure TL-WA500G (AP2) on LAN 3 in Point-to-Multi-Point Bridge mode. TL-WA500G 54M Wireless Access Point User Guide • Both use the same Channel and security settings if security is in use the same Channel, and...
User Guide - Page 29
... Survey on the Figure 4-7 you can view all All Point-to-Point APs' MAC addresses. 3. If you require wireless stations to access any LAN segment, you can add TL-WA500G Access Points configured in Wireless Access Point mode to any settings you have all of APs around you on any LAN segment should be able to...
User Guide - Page 30
.... And if Access Point mode is selected, there is disabled, surveying can be set on the following screen shown as it showed below.
4.4.4 Security Settings
Selecting Wireless > Security Settings will enable you to configure wireless security for your wireless network to protect your data from intruders. Wireless security can 't work. TL-WA500G 54M Wireless Access Point User Guide
) Note...
User Guide - Page 35
... in figure
28 Click Enable All to make all other wireless stations cannot access the AP, you should configure the Wireless MAC Address Filtering list following list as desired in the...Save and Back. 5. Repeat step 4 using the MAC address 00-0A-EB-00-07-5F instead of the wireless station. After finishing the above settings, please select Enabled. TL-WA500G 54M Wireless Access Point User Guide...
User Guide - Page 37
... on the LAN. To update this page. The detailed explanations for each submenu are three submenus under the DHCP menu (shown as a DHCP (Dynamic Host Configuration Protocol) server, which provides the TCP/IP configuration for Dynamic Host Configuration Protocol.
Packets sent by the station. TL-WA500G 54M Wireless Access Point User Guide ¾ Sent Packets -
User Guide - Page 38
...is 1 ~ 2880 minutes. Consult your ISP if you must manually configure the computer. ¾ Start IP Address - This function will be...on the LAN as "Obtain an IP Address automatically" mode. Enter an IP address for the PC to connect ...provided by your AP. The default value is measured in minutes. TL-WA500G 54M Wireless Access Point User Guide
Figure 4-21 DHCP Settings ¾ DHCP Server...
User Guide - Page 40
...You can not access each other through WLAN. This option is part of the wireless signal that wireless stations can configure the settings on some advanced settings for AP mode. ¾ Disable short preamble - To modify a Reserved IP address: 1. Checking... you wish to add a new Address Reservation entry. 2. TL-WA500G 54M Wireless Access Point User Guide
¾ Reserved IP Address -
User Guide - Page 50
... to light up properly for Windows is "Obtain an IP address automatically" in at the Access Point and the network device (hub, switch, or Router). 2) Make sure the connected device is turned on. 3) Make sure the correct cable is on the access point. The LAN LED is a configuration problem. TL-WA500G 54M Wireless Access Point User Guide...
User Guide - Page 52
... -
WLAN (Wireless Local Area Network) - TL-WA500G 54M Wireless Access Point User Guide
Appendix E: Glossary
2x to prevent your computer or network from operating or communicating. The WLAN device with the same...name for an address or group of the largest packet that is typically the configuration parameter for security. 802.11b networks are limited in the unlicensed radio spectrum...
Similar Questions
Tp-link Tl Wa 500g Repeater Setting ??????
i have TP-LINK TL WA-500G ,and i want to set it up as repeater but i cant . i follow company instruc...
i have TP-LINK TL WA-500G ,and i want to set it up as repeater but i cant . i follow company instruc...
(Posted by oldboss30020 12 years ago)
How Do I Find Security Key For Tp-link Tl-wa500g
HOW DO I FIND SECURITY KEY FOR A TL-WA500G
HOW DO I FIND SECURITY KEY FOR A TL-WA500G
(Posted by kevinmorgan7 12 years ago)
This Device And Tl-ant2415d Connect?
this device and TL-ANT2415D can connect and will it work normally ?
this device and TL-ANT2415D can connect and will it work normally ?
(Posted by hannzin2 12 years ago)