Jabra.com/support Pair Jabra Bt2045 With Two Devices

1. Put the headset in pairing mode - When you turn on your Jabra BT2045 for the first time, the headset will automatically start up in pairing mode – i .e . it is discoverable for your phone . When the headset is in pairing mode the LED is constantly lit .

2. Set your phone to 'discover' the Jabra BT2045 - Follow your phone's instruction guide . First make sure that Bluetooth® is activated on your mobile phone . Then set your phone to discover the headset . This usually involves going to a 'setup' , 'connect' or 'Bluetooth® ' menu on your phone and selecting the option to 'discover' or 'add' a device .

3. Your phone will find the Jabra BT2045 - Your phone will find the headset under name "BT2045" . Your phone then asks if you want to pair with the headset . Accept by pressing 'Yes' or 'OK' on the phone and confirm with the passkey or PIN = 0000 (4 zeros) if asked . Your phone will confirm when pairingis complete. Put the Jabra BT2045 into pairing mode manually . Make sure the headset is off . Press and hold the answer/end button for approximately 5 seconds until the LED has a constant light . The LED will flash before the light is constant – keep holding down the button until light is constant . Then follow the steps 2 and 3 above. have your device turned on & the 1st device either turned off or well out of range.

I hope this is helpful to you!

Please respond to my effort to provide you with the best possible solution by using the "Acceptable Solution" and/or the "Helpful" buttons when the answer has proven to be helpful. Please feel free to submit further info for your question, if a solution was not provided. I appreciate the opportunity to serve you!