Hunter 21730 Support Question
Hunter 21730 Support Question
Find answers below for this question about Hunter 21730.Need a Hunter 21730 manual? We have 4 online manuals for this item!
Question posted by nlmcneel on August 17th, 2013
My Lights Kit Doesn't Work. Fan Works Fine
What to should I do
Current Answers
Related Hunter 21730 Manual Pages
Installation Guide - Page 1
... least 6" beyond the box.
5-3. o e outer holes of the ceiling. o Six inches of the fan blade tips.
• e fan is recessed a minimum of the fan and light kit.
Attach the fan supply line to install the support brace and outlet box.
o Fan support system will support the full weight of 1/16" into the ceiling.
3-2. If the...
Owner's Manual - Page 1
For Your Records and Warranty Assistance For reference, also attach your receipt or a copy of your receipt to the manual. Date Purchased
Where Purchased
Type 2 Models
Owner's Guide and Installation Manual
English
Español
Form# 42672-01 20110302 ©2011 Hunter Fan Co. Model Name
Model No.
Owner's Manual - Page 2
... are proud of our work. SAVE THESE INSTRUCTIONS.
• Use only Hunter replacement parts. • To reduce the risk of personal injury, attach the fan directly to the
support structure...and use only the hardware supplied. • To avoid possible electrical shock, before installing your fan, disconnect the power by turning off position, securely fasten a prominent warning device, such as ...
Owner's Manual - Page 3
... safety, reliable operation, maximum efficiency, and energy savings.
Fan Support System
Fan Support System
Suitable Existing Fan Site
Wiring
Outlet Box
3 42672-01 • 03/02/11 • Hunter Fan Company
Ceiling Hole
• The outlet box clearance hole is recessed a minimum of the fan and light kit.
Wiring
• The electrical cable is secured to outlet...
Owner's Manual - Page 4
... box directly to recess the outlet box a minimum of the ceiling. The bottom of the outlet box must be recessed a minimum of the fan and light kit. Thread the fan supply line through the inner holes of 1/16" into the ceiling. Locate the site for the ceiling hole directly below the joist or support...
Owner's Manual - Page 5
... speed controls. Considering Optional Accessories
Consider using Hunter's optional accessories, including a wall-mounted or remote speed control. For quiet and optimum performance of your Hunter fan, use the accessories, follow the instructions included with each product.
Angled Mounting Style
8 12
Angled Mounting recommended for a vaulted or angled ceiling
Support Brace
Low...
Owner's Manual - Page 6
... missing or damaged, contact your Hunter dealer or call Hunter Technical Support Department at 888-830-1326 (In Canada, call 866-268-1936). Installing Multiple Fans? If you need the following : • Locate the ceiling joist or other suitable support in ceiling. • Drill holes for any parts are installing more...
Owner's Manual - Page 7
...Installing the Ceiling Plate
CAUTION: To avoid possible electrical shock, before installing your fan, disconnect the power by turning off position, securely fasten a prominent warning ...Plate
3" Wood Screw
Steps 2-3 - 2-6
7 42672-01 • 03/02/11 • Hunter Fan Company Your fan comes with the pilot holes you drilled. do not use slotted holes directly across from the outlet box in...
Owner's Manual - Page 8
... is fully installed, 2-3 threads on the adapter to an almost vertical position so that the canopy slots sit on the threads.
Hanging the Fan: Note: To hang the fan, you must tilt the canopy to install the pipe and ball assembly. Standard or Angled Mounting Steps 3-2 - 3-3
Downrod
Setscrew
Canopy
Canopy Trim Ring...
Owner's Manual - Page 9
... or green ground wire (grounding) from the ceiling to the white wire (grounded) from the fan. Spread the wires apart, with wiring, use the wire connectors provided. 4-3. To connect the ...making connections.
4-6. If you chose the low profile option, the green ground wire from the fan can be in accordance with a white stripe (ungrounded) from the ceiling to the wire (ungrounded...
Owner's Manual - Page 10
..., partially install two canopy screws into the holes opposite the ceiling plate tabs.
5-4. Swing the fan up to remove the trim ring, press firmly on the ceiling plate. Partially install a canopy ...5-3 Canopy Canopy Trim Ring
Canopy Screw
10 42672-01 • 03/02/11 • Hunter Fan Company The canopy trim ring will flex out releasing the canopy trim ring.
Verify that must remain ...
Owner's Manual - Page 11
... mounting screw through the blade iron, and attach lightly to clean the blades. Note: Some blade mounting screws are tightened.
6 • Assembling the Blades
Hunter fans use a furniture polish or any residue, as ...dirt. Remove the blade mounting screws and rubber shipping bumpers from the motor. Your fan may appear slightly loose after screws are installed in the motor to a blade ...
Owner's Manual - Page 12
... Screw
Note: In compliance with three housing assembly screws.
7-3.
Attach the lower switch housing to the white wire from the fan. To install each ). Note: Glass shade style and number of lights may result in the upper and lower switch housings. Shade
Bulb Thumbscrews
Steps 7-4 - 7-5
12
42672-01 • 03/02/11...
Owner's Manual - Page 13
...fans work best by blowing air downward (counterclockwise blade rotation) in sequence: High, Medium, Low and Off. • Pull the chain slowly to change settings. • Release slowly to the fan... fan. 8 • Operating and Cleaning Your Ceiling Fan
8-1. The fan pull chain controls power to the light. The light pull chain controls power to the fan. In winter, having the fan draw...
Owner's Manual - Page 14
...operation 1. If so, replace all connections according to the fan off at http://www.hunterfan.com. Problem: Lights shut off , support fan very carefully, and check that are not usually made for...are securely attached to the blade irons, follow the instructions in the enclosed balancing kit to the fan.
Remove the shipping bumpers.
If you need parts or service assistance, please call...
Parts Guide - Page 1
... Upper Light Kit Assembly Blade Iron Set Blade Set Screw, Blade Iron Armature Hardware Kit Blade Assembly Screw Wire Connector Balancing Kit Light bulb /...Fan Parts
(Not Drawn to Scale)
PARTS GUIDE
Using this Parts Guide, make sure all parts are missing, DO NOT RETURN THIS ITEM TO THE STORE, call 888-830-1326 for assistance. Dwg. #
Finish Qnty
1
21728 99104-01 New Bronze
Part # 96759-30
21730...
Similar Questions
Light Kit For 28680 Fan.
Do you have to use a bowl light kit or can you install a 3 light kit?
Do you have to use a bowl light kit or can you install a 3 light kit?
(Posted by tayna99159 7 years ago)
How Do I Install My Fan Without The Light Kit?
how do I install my fan without the light kit
how do I install my fan without the light kit
(Posted by Mgdel634 7 years ago)
What Is Causing Lights On My Ceiling Fan Model #21730 Started To Blink?
(Posted by pjdaughton 9 years ago)
Need Hunter Part No. 98378.01, Light Kit Assembly, For Ceiling Fan Model 28679
Hunter says they do not make this model any longer and that they do not have part. Can you help me f...
Hunter says they do not make this model any longer and that they do not have part. Can you help me f...
(Posted by larrypricesimmons 10 years ago)
Can I Install This Fan Without The Light Kit?
Can I purchase a cap to cover the light kit mount so this fan can be installed without the light kit...
Can I purchase a cap to cover the light kit mount so this fan can be installed without the light kit...
(Posted by evadwest 10 years ago)