Bernina 1300MDC Support Question
Bernina 1300MDC Support Question
Find answers below for this question about Bernina 1300MDC.Need a Bernina 1300MDC manual? We have 1 online manual for this item!
Question posted by zieglerrita on June 13th, 2014
Bernina 130
Is it possible to get an extension table for modet 130?
Current Answers
Answer #1: Posted by TechSupport101 on June 13th, 2014 5:36 AM
TechSupport101
Member since:
May 24th, 2013 Points: 12,171,345
Member since:
May 24th, 2013 Points: 12,171,345
Hi. Used ones most likely. See the one here http://www.ebay.com/itm/Bernina-Extension-Table-301-130-00-for-Older-830-Bernina-Record-Sewing-Machine-/131210504709?pt=LH_DefaultDomain_0&hash=item1e8cc16a05
Related Bernina 1300MDC Manual Pages
User Guide - Page 1
... possible damage as contained in this sewing computer is provided on a doubleinsulated product nor should never be taken on behalf of BERNINA ...machines.
IMPORTANT SAFETY INSTRUCTIONS ! Always unplug this manual. Use only attachments recommended by removing the plug from all instructions before cleaning. When using an electrical appliance, basic safety precautions should the sewing...
User Guide - Page 2
... stitch quality, but you also have a beautiful color screen which is the best sewing computer on the world market with the Bernina rotary hook system, offers endless possibilities in the center of embroidery. Both models have the option of the machine-right where you need it-and the user interface is extremely intuitive and...
User Guide - Page 5
... darning, monograms, and freehand embroidery
20 Open embroidery foot Embroidery, appliqué, satin stitch seams, monograms
BERNINA Specialty Presser Feet
The standard selection of presser feet covers most normal sewing requirements, but we recommend the use of 130/705 H needles • seam ripper • small screwdriver • angular Torx key • lint brush...
User Guide - Page 15
...BERNINA dealer!
031196.50.04_0507_a630_EN
Thread Tension Settings Perfect Stitch Formation • the stitch formation is in line with Metrosene 100/2 threads (Arova Mettler, Switzerland).
If other threads are used, the tension may need adjusting for normal sewing...adjusting to suit the fabric and chosen stitch.
The sewing computer must ONLY be adjusted to suit the fabric
...
User Guide - Page 17
... checked and the needle replaced regularly. A defective needle not only damages the fabric but also the sewing computer. Needle Summary BERNINA requires needle system 130/705 H. The following are the guidelines: replace needle when starting a new sewing project or as to check the needle/thread compatibility, the correct size thread must correspond with the...
User Guide - Page 18
..., slight ball point
Embroidery on all natural and synthetic fabrics
Metafil 130/705 H-MET
Large eye
Sewing with metallic threads
Cordonnet 130/705 H-N
Small ball point, long eye
Topstitching with thick thread
Wing needle 130/705 HO
Wide needle (wing)
Hemstitching
Double wing needle 130/705 H-ZWI-HO
Special effects with hemstitch embroidery
Double needle...
User Guide - Page 21
...of the stitch plate hole.
To correct the height in front of the fabric is level.
When sewing corners only a small section of the foot, place one or more compensating plates as close to...fabric well. Uneven layers To solve this by placing one , two or three
1 compensating plates as possible to the edge of the foot close as required behind the needle under the presser foot to the ...
User Guide - Page 22
Welcome Screen • switch sewing computer on: power switch to «I» (on) • Welcome screen appears ... Practical Stitch (Menu) appears automatically on the screen, which shows:
A Stitch width (basic setting always visible) B Needle Position (11 possibilities) C Selected, active stitch and number D Single Mode / Combi Mode E Up/down scroll arrows F Stitch length (basic setting always...
User Guide - Page 24
...visible. The basic settings are automatically saved.
When the sewing computer is turned off («0»). They will stay saved even after the sewing computer is turned off («0») or the «...• the recommended presser foot
for the selected stitch is displayed by BERNINA can be changed and stored in blue (a number of different functions can be selected simultaneously)
29...
User Guide - Page 28
...) appears
• 9 menus for advice on embroidery are available on the screen
Setup Program
Setup Program
• options appear • use Setup to customize your sewing
computer's settings • customized settings can be reprogrammed
at any time or reset to...
User Guide - Page 35
... in sportswear
Simple darning program Automatic darning in one operation
Bartack program Reinforcing pocket edges, belt loops, etc. Sews and finishes edges in fine and mediumweight fabrics
Bartack program Reinforcing pocket edges, belt loops, securing zippers
Fly stitch...zippers and openings
Blindstitch narrow Blind hems on underwear
Knit overlock All knits, machine or handmade, overlock seam.
User Guide - Page 44
... knits
Use a Stretch Needle (130/705 H-S) if Necessary • the needle point slides easily between the
fibers
Use a Fine Sewing Thread • coarse threads can wave when sewn: • reduce the pressure until the seam lies
flat • the sewing computer must still feed the
fabric properly
Possible Problems With Sewing Knits
Seam Becomes Wavy...
User Guide - Page 45
...Sewing stretch fabrics • if necessary use a stretch
needle (130/705H-S) = needle point slides between the fibers
031196.50.04_0507_a630_EN Sewing • guide the raw edge along the raw
edge
Practical Stitches - Sewing • sew...No. 10 size and type suitable for the fabric selected cotton or polyester up (sewing position) Overlock foot No. 2 or Reverse pattern foot No. 1
Overlock foot...
User Guide - Page 80
... is moved unintentionally! Please refer to 5mm). BSR function can be maintained when sewing with the zig-zag stitch, but the BSR function simplifies the application. This also...» to the maximum speed possible.
The beeper can be turned on the «BSR» screen. interchangeable soles (closed, open, transparent)
BSR (BERNINA Stitch Regulator) Function The BSR ...
User Guide - Page 99
...by touching the designated gray bar, the
following personal information of your BERNINA dealer can be entered: • Store name • Last ...Version» opens • the current version of the sewing computer
and the embroidery module (must be attached) are visible...the screen closes and the
selection menu appears
Updating the Sewing and Embroidery Computer
Opening Setup Program • press ...
User Guide - Page 100
...
106
sewing and embroidery computer is ready
again for normal use with the new version
Caution: Do not remove the BERNINA USB stick... until the end of the update is displayed by a message.
107
Opening Setup Program • press the Setup button • selection menu appears • touch «8» • a summary of the screen appears
• two choices are possible...
User Guide - Page 104
...Possible...Sewing computer has been standing in a
cold room. • restart sewing computer
Defective Sewing Light
• Please note that the CFL-sewing light must be replaced by an authorized BERNINA technician. Sewing... only 130/705H ...table page 17 • the sewing computer is too thick for hard leather. Calibration of your sewing and embroidery computer can be purchased from your sewing...
User Guide - Page 119
...you purchase thread from a reputable BERNINA dealer in order to mediumweight thread suitable for embroidery (Mettler 60 weight suggested), which so often occur with a Metafil 130/705 H-MET needle or Organ...
One of the most important elements in successful embroidery is a light-
When sewing with a brilliant sheen and suitable for bobbin thread. We strongly recommend that will be ...
User Guide - Page 132
...be scaled within the limits of 75% to test-sew your edited size and/or position of the design ... However, since there might be proportionally enlarged or reduced.
Bernina's stitch process engines add correct density in 1% steps.
... horizontally
Rotating mirrored motifs A wonderful variety of combinations are possible together with the function «Rotate Motif». Preparation ...
User Guide - Page 148
... attach head frame and tighten screw
Upper Thread Breaks
Possible Faults: • upper thread tension is too tight ... authorized BERNINA dealer • reduce embroidery speed
Skipped Stitches
• incorrect needle used: • Use only 130/705H ...sewing and embroidery computer can be saved on a USB stick and sent to your authorized BERNINA dealer: • insert the USB stick into your sewing...
Similar Questions
1300mdc Coverstitch Skipping Stitches
When I stitch on Knits. I am getting skipped stitches. On Wovens, not so much, Also, the wide cover ...
When I stitch on Knits. I am getting skipped stitches. On Wovens, not so much, Also, the wide cover ...
(Posted by melodykona 4 years ago)
Troubleshooter For Machine, Light Is On, Machine Won't Sew
I have plugged machine in, light is on, door is shut, presser foot is down- but machine won't sew. m...
I have plugged machine in, light is on, door is shut, presser foot is down- but machine won't sew. m...
(Posted by wacpcsue 4 years ago)
I Cant Turn The Handwheel On My 1300mdc Overlocker As It Has Seized, Therefore
I Cannot Sew.
I Cannot Sew.
(Posted by johunter39127 9 years ago)
Bernina 1090 S Sewing Machine Manual
I Dont See The User Manual For This Machine For Free Downloading.what User Manual Are The Same As Th...
I Dont See The User Manual For This Machine For Free Downloading.what User Manual Are The Same As Th...
(Posted by cynthianel 10 years ago)
Looking For A Manual On A Berenia 640 Sewing Machine. Artista
Cannot get a manual to download from the website WWW.bernia usa
Cannot get a manual to download from the website WWW.bernia usa
(Posted by jsue 11 years ago)