Singer 8763 Curvy Support Question
Singer 8763 Curvy Support Question
Find answers below for this question about Singer 8763 Curvy.Need a Singer 8763 Curvy manual? We have 1 online manual for this item!
Question posted by Dconway979 on July 15th, 2020
Putting Face Plate On
I always have trouble getting face plate back on after working on bobbin problem
Requests for more information
Request from INIMITABLE on July 16th, 2020 12:16 AM
I guess you mean the bobbin cover plate?
I guess you mean the bobbin cover plate?
Current Answers
Answer #1: Posted by Odin on July 16th, 2020 9:50 AM
Odin
Member since:
April 10th, 2010 Points: 41,236,690
Member since:
April 10th, 2010 Points: 41,236,690
See if the post by Arben Klobucista at https://www.facebook.com/SingerSewingCompany/posts/i-have-a-singer-curvy-8763-i-removed-the-needle-plate-to-clean-and-now-i-cannot-/10151932124904922/ applies to your concern. If not, you'll need to consult Singer; use the contact information at https://www.contacthelp.com/singer/customer-service.
Hope this is useful. Please don't forget to click the Accept This Answer button if you do accept it. My aim is to provide reliable helpful answers, not just a lot of them. See https://www.helpowl.com/profile/Odin.
Related Singer 8763 Curvy Manual Pages
Instruction Manual - Page 3
KNOWING YOUR SEWING MACHINE Machine identification 6 - 7 Accessories 8 - 9 Setting up your machine 10 - 11 Spool pins 12 - 13 Presser foot lifter, Darning plate 12 - 13 Converting to free-arm sewing 12 - 13 Winding the bobbin 14 - 15 Threading the bobbin thread 16 - 17 Threading the top thread 18 - 19
Using automatic needle threader 20 - 21 Needle, thread and fabric chart...
Instruction Manual - Page 6
...15. Bobbin cover plate 23. Needle plate 30. Needle
22. Bobbin cover release button
14
31. 1. Bobbin winder stop
4
9. Thread guide
20. Presser foot screw
11
21. Thread guide
1
2. Horizontal spool pin
5
11. Identification plate
16. Buttonhole lever
18. Extension table (Accessory box)
7. Handle
12. KNOWING YOUR SEWING MACHINE
MACHINE IDENTIFICATION
1. Needle...
Instruction Manual - Page 8
... stitch foot 14. When purchasing additional bobbins, be used for the majority of your Sewing machine is another very useful foot and should be used for needle plate 10. Spool pin felt discs (2) 5.
Spool pin cap (small) 6. Spool pin cap (large) 8. Zipper foot 12. ACCESSORIES
1. Needles 2. Bobbins (4 total - 1 in machine) 3. Darning plate 11. Satin stitch foot 13...
Instruction Manual - Page 10
...;n de la linea eléctrica
Foot control Rhéostat Control por pedal
POWER/LIGHT SWITCH
Your machine will not operate.
When servicing the machine, or changing needles, etc., machine must be disconnected from needle plate area before using your wall outlet (2) as illustrated. Connect the foot control plug (3) into the cord socket...
Instruction Manual - Page 12
... SPOOL PIN for button sewing, free motion work and free motion darning. Lower the presser foot to insert or remove
fabric. 3. Lift it . CONVERTING TO FREE-ARM SEWING
Your machine can be placed to ...Tapa del pasador carrete
Spool Bobine Carrete
Spool pin Porte-bobine Pasador carrete
DARNING PLATE
Use the darning plate when you need to the right. Select the correct spool pin cap according to...
Instruction Manual - Page 14
... shaft to far left to the left position, if it is not already there. Start machine. Put end of thread on the foot control again to continue
to use Class 15 J bobbins.
1. Step on the spool pin, and secure it with end of thread
3
coming from the spool and place it clicks. WINDING...
Instruction Manual - Page 16
NOTE: Sewing can be started without picking up sufficiently to the left . Pull thread through the slot (A) and then to
2
allow you pull the thread.
3
NOTE: This is pulled.
4. Then pull the thread
along the groove on the needle plate until it is snipped with
cutter on top of the bobbin, pull the
5
thread...
Instruction Manual - Page 20
... may be pulled off from needle hole,
adjust the position of sewing machine oil onto the felt disc,
if the machine is recommended that the guide doesn't touch fabric, etc.
5. ...lifter and raise the needle to its highest position before threading. NOTE: Make sure that the machine be broken. 3. Put a drop of the hook.
3
Threading hook Crochet d'enfilage Gancho del ensartador
A B
...
Instruction Manual - Page 22
...
THREAD
The fabrics below can go. 6. Insert the new needle into the needle plate slot.
22
Always disconnect the machine from power supply by turning the hand wheel counter clockwise.
2. Tighten the needle ... before a new sewing project. They are listed as examples of any fiber: cotton, linen, silk, wool, synthetic, rayon, blends. Push the needle up as far as in the bobbin as it easier ...
Instruction Manual - Page 24
... the needle plate aligning the
presser foot pin with the foot holder. 3.
Place the desired foot on the bottom side of your fabric.
Raise presser foot lifter. 1. BOBBIN TENSION
The bobbin tension has been... to adjust the tension control. If, when you start to sew, you find that the foot holder snaps
on top of the machine. The tension is largely determined by the balanced tension of the...
Instruction Manual - Page 26
.... Auto (preprogrammed) default settings are for straight stitch. Stitch length and width/needle position controls
Your sewing machine will sound. Notes: 1.
To select other patterns, push the pattern selection button to move the control knobs while sewing slowly.
26 Note: Instructions for manual adjustments than others. 2.
CONTROL PANEL FUNCTIONS
Pattern selection buttons
Turn...
Instruction Manual - Page 28
... where the reverse/tacking stitch button is very useful for tie-off the sewing on all patterns except straight and zigzag stitches. NOTE: This function is pushed. The machine will be at the start and end of other stitches The sewing machine makes 4 tiny tacking stitches to avoid raveling at the exact spot in...
Instruction Manual - Page 32
...on the top of sewing. Start the machine. Guide the fabric gently with the
thread cutter located on the bobbin cover plate is 1/4" (6mm)...face cover as those in doll clothes or baby garments.
32
3/4" (19 mm) 5/8" (16 mm) 1/2" (13 mm) 3/8" ( 9 mm) 1/4" ( 6 mm) STRAIGHT STITCHING
A
Straight stitch is most frequently used to the rear and cut off excess threads with your fabric when sewing...
Instruction Manual - Page 34
...and pin or tack it to the main piece of fabric. When
sewing the machine will pull this thread to look like hand sewing for topstitching and quilting. 1.
Start to presser foot holder so that
...to foot holder.
To sew down the right side, attach left side of the foot. PIPING To pipe soft furnishings, cover cord with the Stitch Width Control. Thread bobbin with desired top stitching ...
Instruction Manual - Page 36
...length between 0.5 and 2.0 for appliqué, bartacking, etc.
If bobbin thread is selected.
NOTE: The values shown in the chart are actual sewing lengths and widths and do not correspond to the top or you are....
PLACEMENT OF PATTERNS
Stitch width of stitch and sewing speed, but the bobbin thread must never appear on the sewing machine.
ZIGZAG STITCHING
SETTINGS :Presser foot -
Instruction Manual - Page 44
...used to be obtained for decoration. For drawn thread work . Another use for the ladder stitch is primarily used for picot-like edges and for applique work , choose a coarse linen type fabric and after sewing draw the thread out within the ladder for quilting ... an open airy appearance.
44
FEATHER STITCH
The pleasing appearance of this stitch enables it to put bindings on blankets.
Instruction Manual - Page 52
... of garments and home decorating projects. Sew 10 stitches. Adjust width if required....sew over top of button. General Purpose Foot
or Satin Stitch Foot
:Thread tension control - Helpful Hint: To secure thread, pull both threads to make sure needle clears both left and right openings of it as illustrated. CONTINUOUS PATTERNS
SETTINGS :Presser foot - General Purpose Foot :Darning plate...
Instruction Manual - Page 60
... on the hook race as it is necessary to its highest position and put
6
and slide the needle plate into position as illustrated for sewing machine lubrication.
(2)
(A) (B)
5. Remove the bobbin case (2).
3
4.
3. Replace the bobbin case with the lint brush.
4
Put one drop of your machine, it is suggested. Make sure that the needle is at all purpose" oil...
Instruction Manual - Page 64
... lever is not raised when sewing stitch patterns.
- Disengage bobbin winder (see page 24 - 25). * Stitch length is not correct for thread and fabric. - Machine jams/knocks. * Thread is caught in hook.- Lengthen stitch length. * Darning plate is not all the way up into the needle clamp. - Remove darning plate. STITCHING PROBLEMS
Machine skips stitches. * Needle is...
Instruction Manual - Page 68
...bobbin, or changing presser foot, etc." 15. "Do not allow to break." 14. "Do not use outdoors." 7. reduce
risk
of electric shock, this sewing machine... plate as described in this sewing machine."...sewing machine is not working properly, if it to be used or where oxygen is for all instructions before replacing light bulb. Close attention is required around the sewing machine...
Similar Questions
I Get E7 Error Message On My Singer Model 7258 Sewing Machine. There Is No Refe
Error message E7 is up on my Singer Stylist model 7258 sewing machine. It is not working at all. I t...
Error message E7 is up on my Singer Stylist model 7258 sewing machine. It is not working at all. I t...
(Posted by ebellamybellamy9 5 years ago)
My Sewing Machine Is Not Sewing The Correct Stitch.
When I push the automated button to sew a special stitch it will not sew it. What can I do?
When I push the automated button to sew a special stitch it will not sew it. What can I do?
(Posted by tammywood16 7 years ago)
Singer Sewing Machine 8763 Bobbin Thread Does Not Sew After Material Jam
(Posted by Anonymous-151081 9 years ago)
Question For Future Singer Sewing Machine
My sewing machine keeps beeping and displays a "E1" I have re threaded a couple times??
My sewing machine keeps beeping and displays a "E1" I have re threaded a couple times??
(Posted by Nanalora13 9 years ago)
Beeping From Singer Sewing Machine Stylist Ii 5625
My sewing machine will beep and stop sewing after three inches of sewing. I have taken it to be repa...
My sewing machine will beep and stop sewing after three inches of sewing. I have taken it to be repa...
(Posted by arusheria 9 years ago)