Ridgid R4030 Support Question
Ridgid R4030 Support Question
Find answers below for this question about Ridgid R4030.Need a Ridgid R4030 manual? We have 1 online manual for this item!
Question posted by Phat56007 on January 1st, 2021
How Do You Replace The Laser Battery?
The laser on my Ridgid R4030 has gone out. How should I go about replacing it?
Current Answers
Answer #1: Posted by Odin on January 1st, 2021 11:44 AM
Odin
Member since:
April 10th, 2010 Points: 41,236,660
Member since:
April 10th, 2010 Points: 41,236,660
Hope this is useful. Please don't forget to click the Accept This Answer button if you do accept it. My aim is to provide reliable helpful answers, not just a lot of them. See https://www.helpowl.com/profile/Odin.
Related Ridgid R4030 Manual Pages
Operation Manual - Page 1
OPERATOR'S MANUAL
7 in. TILE SAW
R4030
To register your RIDGID product, please visit:
http://register.RIDGID.com Pour enregistrer votre produit de RIDGID, s'il vous plaît la visite:
http://register.RIDGID.com Para registrar su producto de RIDGID, por favor visita: http://register.RIDGID.com
Your tile saw has been engineered and manufactured to our high standards...
Operation Manual - Page 2
English TABLE OF CONTENTS
Introduction...2 General Safety Rules...3-4 Specific Safety Rules...5 Symbols...6 Electrical...7-8 Features...9-10 Tools Needed...10 Loose Parts...11 Assembly...12-17 Operation...18-21 Adjustments...22-23 Maintenance...24-25 Warranty...26 &#...
Operation Manual - Page 3
... ELECTRICAL SHOCK BY PREVENTING BODY CONTACT WITH GROUNDED SURFACES. All visitors should be properly repaired or replaced by removing starter keys.
DON'T FORCE TOOL. Don't use it for which it was designed.
USE RIGHT TOOL. Make sure your extension cord is unintentionally contacted.
CHECK DAMAGED PARTS. Use only a cord heavy...
Operation Manual - Page 4
...away from the rotating wheel.
INSPECT EXTENSION CORDS PERIODICALLY and replace if damaged.
GROUND ALL TOOLS. Never use common sense. Normal sparking of the electric cord or ...grounding plugs and 3-pole receptacles that are tired. Have defective switches replaced by a qualified electrician.
KEEP TOOL DRY, CLEAN, AND FREE FROM OIL AND GREASE. Instructions for ...
Operation Manual - Page 5
... cutting tool.
MAKE SURE THE WORK AREA HAS AMPLE LIGHTING to free a stalled wheel without first turning the saw OFF and disconnecting the saw before operating. e) Replace damaged cutting...from the power source.
IF THE POWER SUPPLY CORD IS DAMAGED, it can
be replaced only by the manufacturer or by power sanding, sawing, grinding, drilling, and other construction activities ...
Operation Manual - Page 6
SYMBOLS
The following signal words and meanings are intended to explain the levels of the following symbols may be used on this tool.
CAUTION:
Indicates a potentially hazardous situation, which , if not avoided, will result in death or serious injury. NOTICE:...protection.
Please study them and learn their meaning. Wet Conditions Alert
Do not expose to operate the tool better and safer.
Operation Manual - Page 7
... this product. GROUNDING INSTRUCTIONS
See Figure 1. The wire with outdoor appliances; Use the chart provided below to overheat. Before using and replace if damaged. If damaged replace immediately. ELECTRICAL CONNECTION
This tool is powered by a qualified electrician.
This product is for a short distance will overheat.
These extension cords are intended for a greater...
Operation Manual - Page 8
... outlet or plug. Do not touch the plug with an extension cord, ensure the connection of the tool plug or outlet getting wet, position tile saw until an outlet can be changed or auxiliary protection can... with the outlet. POSITION OF THE TILE SAW
See Figure 2. To avoid the possibility of the tool's power cord and the extension cord are available at your local retailer. If the plug or outlet...
Operation Manual - Page 10
...:
PHILLIPS SCREWDRIVER FLATHEAD SCREWDRIVER
10 mm, 14 mm WRENCH
C-CLAMP FRAMING SQUARE
10 -
A 7 in this tool.
MITER GUIDE - This saw . FEATURES
KNOW YOUR TILE SAW
See Figure 3.
The safe use of this ... on /off switch. tile cutting wheel is included with your saw has an easy access on the tool and in . Failure to the cutting wheel. MOTOR - ON/OFF SWITCH - SLIDING TABLE - The...
Operation Manual - Page 12
... with the holes
on this list are replaced. Any such alteration or modification is recommended that may have carefully inspected and satisfactorily operated the tool.
MOTOR HEAD ASSEMBLY
WARNING:
Do not...damaged or missing, please call 1‑866‑539-1710 for accuracy. Use of this tool. Finger tighten then lightly torque using hex nuts. HEX NUT SPACER
12 - WARNING:
Do...
Operation Manual - Page 14
...the wheel bolt from securing the wheel on the arbor. Larger wheels will come installed on this tool.
Place the cutting wheel onto arbor with the flats on arbor.
The double "D"...in . English Either of the machine to do so could result in the counterclockwise direction.
Replace the outer washer. Never use a wheel that have openings, grooves, or teeth on this product. ...
Operation Manual - Page 16
... to splash onto the ground or around the machine. Rinse the machine thoroughly. Discard the waste water in accordance with local regulations.
Replace the drain plug and refill tray with clean water. ASSEMBLY
FILLING/CHANGING THE WATER RESERVOIR
See Figures 15-16. Fill the water reservoir with...
Operation Manual - Page 17
... wheel to stop moving and disconnect the power to polarity indicators inside the battery compartment. Replace the battery compartment cover. INSTALLING LASER BATTERIES
See Figure 18. Remove screw from this tool. • Always inspect and replace damaged cutting wheels before operating
the tool. • Do not expose to rain or other than those specified herein could...
Operation Manual - Page 18
...designed to cut man-made tile, pavers, and stone tile products only. Failure to heed this tool for the purposes listed below: Straight line cutting operations such as cross cutting,
mitering,...raise the motor head. ON/OFF SWITCH
See Figure 20.
This action will prevent the tool from accidentally starting , ALWAYS make sure the switch is intended to prevent unauthorized and possible...
Operation Manual - Page 19
... any part of the cut material can not force the wheel back to be cut on the tile using angle scale and tighten securely with tool function.
Operation Manual - Page 22
... sliding properly after each roller as needed . Once the screws are necessary. Repeat for each adjustment. ADJUSTMENT
WARNING:
Before performing any adjustment, make sure the tool is unplugged from the power supply and the switch is square with the cutting wheel.
Tighten the cap bolts securely. However, some of the...
Operation Manual - Page 23
... to the table and the hex bolt is resting on the saw housing. TO ADJUST THE LASER GUIDE
See Figure 31. NOTE: These adjustments were made at 45°. Using ... the saw .
ADJUSTMENT
POSITIVE STOP ADJUSTMENTS
See Figure 30. NOTE: Avoid direct eye exposure when using the laser guide. Use the work clamp or a C-clamp to
stop rotating before cutting through your workpiece...
Operation Manual - Page 24
...clean any other parts can result in serious personal injury.
Tighten securely.
Dry off the tool.
After extended use to damage from sliding smoothly. CLEANING THE SAW
Unplug the saw.
...24 -
Most plastics are lubricated with local regulations.
Replace the drain plug. MAINTENANCE
WARNING:
When servicing, use .
NOTE: To maintain efficiency and extend the ...
Operation Manual - Page 25
... Remove brush assembly.
Check for wear. MAINTENANCE
BRUSH REPLACEMENT
See Figure 32. Proceed as follows when replacement is required: Unplug the saw has externally accessible brush assemblies that...and rinsed with clean water. BRUSH CAP
BRUSH ASSEMBLY
Fig. 32
25 -
Replace both brushes when either side of carbon remaining. The saw .
Remove brush cap ...
Operation Manual - Page 26
... legal rights, and you are dissatisfied with the tool such as brushes, chucks, motors, switches, cords, gears and even cordless batteries in to an authorized service center for any part...return the tool to the dealer from state to RIDGID® hand held and stationary power tools. English
The replacement tool will repair any faulty workmanship, and either repair or replace any ...
Similar Questions
Lasers Useless - Suddenly
When I began using the saw the lasers created two lines, suddenly, they now create two spots that do...
When I began using the saw the lasers created two lines, suddenly, they now create two spots that do...
(Posted by chstrees 9 years ago)
