Question posted by duym12559 on March 9th, 2011
How Do I Change The Name Of My Linksys Device
Current Answers
Answer #1: Posted by DreadPirateRoberts on May 6th, 2011 5:43 AM
Step 1:
Access the router’s web-based setup page.
All Linksys routers have built-in web-based setup pages that allow the user to customize settings and set up advanced properties.
NOTE: Before accessing the router’s web-based setup page, make sure the router is powered on and the computer is wired to one of the Ethernet ports on the router (1, 2, 3 or 4 ).
Accessing the Router’s Web-Based Setup Page
Step 1:
Open a web browser such as Internet Explorer.
Step 2:
Go to the Address bar and enter your router’s IP Address (“192.168.1.1” is the default IP of most Linksys routers) then press [Enter].
NOTE: If the IP address of the router has been changed, type the router’s IP address in the Address bar instead.
The router’s IP address can be changed by:
- Running the router’s setup CD.
- Changing it on the router’s web-based setup page.
If you forgot the router’s IP address you can:
- Check the router’s IP address.
- Press the Reset button at the back of the router for 30 seconds.
NOTE: This procedure will reset your router to factory defaults. Any settings on the router will be erased. The router’s IP address will be “192.168.1.1” and the username and password will be “admin” after resetting.
Step 3:
A new window will prompt for a User name and Password, type “admin” (this is the default user name and password), then click OK.
If the computer is having problems accessing the router's web based setup page, make sure the computer is connected properly to the router. ( computer needs to be hard wired via Ethernet cable)
the SSID will either be under it's ow heading or under wireless security depending on the model.
Enter whatever you want to change your network name to then save your settings
Linksys Knowledge Base Results
We have determined that the information below may contain an answer to this question. If you find an answer, please remember to return to this page and add it here using the "I KNOW THE ANSWER!" button above. It's that easy to earn points!-
Setting the Network Connection Type to Static IP
... Gateway Step 6: Follow the instructions below to set the Network Connection Type to Static IP? You can change the device's wired, Ethernet network settings to Static IP. Access the Web-Based Utility of the device. 17604 02/23/2009 10:25 PM Setting the Network Connection Type to Static IP How do I set... -
Updating the SoloLink DDNS Registration
... a free 90-day trial of the SoloLink service upon purchase of the camera, even when it changes. Many Internet providers assign a new IP address to a connection from time to remember web address that...web-based setup page, click . With an easy to time or when your domain name, device name, WAN port, and preferred DDNS Service Update. 3894 02/22/2009 11:12 PM Updating the ... -
WET610N FAQ
... Basic Wireless Settings screen, make sure the Network Name (SSID) matches the name of your SSID in which the list of SSID item. 7. You can I reboot the WET610N? Others/Additional Info 1. Where can change the device's wireless SSID in the Bridge are not displayed...
Similar Questions
I need to change from secrity on my current router how do I do this ? I have a WRT160N v2 I cn be re...
i need to change the password help please