Icom IC-A110 Support Question
Icom IC-A110 Support Question
Find answers below for this question about Icom IC-A110.Need a Icom IC-A110 manual? We have 1 online manual for this item!
Question posted by roarkempe on February 13th, 2020
How Can I Instal A Channel To The Memory
How can i instal a channel to the memory
Current Answers
Answer #1: Posted by waelsaidani1 on February 14th, 2020 8:05 AM
waelsaidani1
Member since:
May 12th, 2013 Points: 19,501,797
Member since:
May 12th, 2013 Points: 19,501,797
Programming a memory channel The transceiver has 20 memory channels for storage of often -used frequencies. qPush [V/M] to select VFO mode, if necessary. wTurns the [DIAL] to select the desired frequency. R26; Push [DIAL/TS] one or more times to use the dial select function, if desired. e Push [V/M] for 5 sec. to enter memory programming mode. R26;" " and memory channel number appear. r Turn the [DIAL] to select the desired memory channel number. t Push [V/M] for 1 sec. to program the information into the channel and return to VFO mode. R26;Push [SQL] for 1 sec. to clear the memory information.
Related Icom IC-A110 Manual Pages
Instruction Manual - Page 2
..., may occur. NEVER connect the transceiver to this transceiver under FCC regulations. This in an explosive atmosphere.
struction manual contains important operating instructions for the IC-A110. Hearing experts advise against such accidents and the transceiver will not give any protection against continuous high volume operation. The explicit definitions below...
Instruction Manual - Page 3
...function 5 I LCD backlight control 5 I Dial select function 5 3 SCAN OPERATION 6 - 7 I Scan operation 6 I On-hook scan 7 I Dualwatch 7 4 MEMORY PROGRAMMING 8 - 9 I Programming a memory channel 8 I Memory names 9 5 OTHER FUNCTIONS 10-11 I Initial set mode 10-11 6 CONNECTION AND INSTALLATION 12 - 13 I Rear panel and connections 12 I Mounting 13 I Supplied accessories 13 7 CLONING 14...
Instruction Manual - Page 4
w FUNCTION DISPLAY (p. 3) Displays the operating frequency, memory channel name, etc.
t POWER SWITCH [POWER] Push and hold for 1 sec. to ... the operating frequency; to toggle the dimmer control OFF, Low and High. ➥ Push and hold 500 m sec. memory channel in set mode (p. 10)
• Cloning mode (p. 14)
1 r LOUD SPEAKER Front mounted loud speaker.
set mode contents in...
Instruction Manual - Page 5
...)
• "Pr" appears on the display. i SCAN SWITCH [SCAN] ➥ Starts and stops the scan function:
• VFO mode: VFO scan function. • Memory mode: Memory channel scan function. (p. 6) ➥ Push and hold this switch for 1 sec. PANEL DESCRIPTION 1
y SQL SWITCH [SQL] ➥ Push to turn on the squelch adjust mode. (p. 6) ➥ ...
Instruction Manual - Page 6
...) ➥Shows the operating frequency. ➥Shows the channel name when the memory name function
is activated. o LOCK OUT INDICATOR ➥ Appears when the channel is set mode is selected. (p. 12)
q MEMORY MODE INDICATOR (p. 5) Appears when memory mode is open. (p. 6)
*NOTE: The VFO/memory switch [V/M] and the memory write switch [M/W] functions may not be available depending on...
Instruction Manual - Page 7
... select "SP OFF". q Push and hold the tuning dial for 1 sec.
w Operate the transceiver as indicated in the following sec-
2 BASIC OPERATION
I Channel selection
ï VFO/Memory selection
q Push [V/M] to select memory mode or VFO mode.
➥ Rotate the dial to adjust the squelch level. (p. 6)
• Push and hold [SQL] for 1 sec. ted...
Instruction Manual - Page 9
....
Scan step is pre-programmed by cloning. Mch 1
Priority SKIP Mch 2*
ch
Mch 3
Mch 20
*: Lockout ch
ï NORMAL SCAN •Memory lock scan
Repeatedly scans memory channels except skip (lockout) channels. 3 SCAN OPERATION
I Scan operation
q Push [V/M] to start scan. • To change the scan direction, turn [DIAL]. • "SCAN (or P SCAN)" flashes...
Instruction Manual - Page 10
... signal disappears even if you take the microphone during dualwatch.
to frequency. ➥ • In memory scan; scan resumes promptly to start scanning. 3 SCAN OPERATION
I Dualwatch
Dualwatch monitors priority channel while you are receiving an other channel (VFO or memory channel).
• If a signal is available when taking the microphone from the
hook. scan resumes...
Instruction Manual - Page 11
... often -used frequencies. w Turns the [DIAL] to select the
desired frequency. • Push [DIAL/TS] one or more
times to clear the memory information. 4 MEMORY PROGRAMMING
I Programming a memory channel
D Setting lock out channels
In order to speed up the scan interval, you don't wish to be available depending on version.
8 to use the dial select...
Instruction Manual - Page 12
... many times as _). • To move the cursor forwards or backwards, use [Y] or [Z]. • Push [SQL] for 1 sec.
9 or
V/M for 2 sec. 4 MEMORY PROGRAMMING
I Memory names
ï Programming memory names
q Select the memory channel to be used in length. • When no name is programmed, the display shows the operating frequency.
[EXAMPLE]: Setting the name to...
Instruction Manual - Page 13
... Clark Co. r Push [SCAN] to display a memory name instead of frequency. • When a memory channel has not been programmed with a name, frequency indication ...Memory names
This item allows you prefer. These can "customize" transceiver operations to turn power ON. • The transceiver enters initial set mode and "MN", "BP", "ST" or "PR" (p. 11) appears on the display.
In this way...
Instruction Manual - Page 14
The default setting for quick recall. rPush [POWER] to OFF position.
11 NEVER select the blank memory channel as a priority channel or OFF with [DIAL].
In such case priority automatically sets to turn the power ON. • The transceiver enters initial set mode. wPush [TS(DIAL)] ...
Instruction Manual - Page 15
6 CONNECTION AND INSTALLATION
I Rear panel and connections
› External speaker jack
⁄
Antenna ¤
fi OPC-871 HEADSET ADAPTER (Option)
‹
Supplied DC power cable
black: . red: ,
12 V or 24 V Battery
q Connects to an antenna Ask your dealer about antenna selection and best installation location. (Standard 50 Ω antenna with a SWR
Instruction Manual - Page 16
... bracket 1 y Bracket bolts 4 u Mounting screws (M5 × 12 4 i Self-tapping screws (M5 × 20 4 o Flat washers 4 !0 Spring washers 4 !1 Nuts 4 !2 Fuses (10 A 2
13 6 CONNECTION AND INSTALLATION
I Mounting
I Supplied accessories
Flat washer Spring washer
1
2
4 3
When using self-tapping screws
The universal mounting bracket supplied with the 4 supplied screws (M5 × 20) to...
Instruction Manual - Page 17
...and cloning must be cloned to and from PC to a transceiver using the optional CS-A110 CLONING SOFTWARE and the optional OPC478 CLONING CABLE+ OPC-592 CLONING CABLE ADAPTER. D ...'s display. •"CL-IN" appears automatically in the slave transceiver's display. Consult the CS-A110 CLONING SOFTWARE HELP message for slave transceiver). •"CLONE" appears and the
transceivers enter the clone...
Instruction Manual - Page 18
...
: 25 kHz or 25/8.33* kHz
superheterodyne
• Mode
: AM (6K00A3E)
• Intermediate frequencies : 1st 38.85 MHz
• Number of memory channels : 20
2nd 450 kHz
• Acceptable power supply : 13.75* V or 27.5* V DC
•Sensitivity (at 13.75 V DC
with 8 Ω load 60 % MOD. 10% ...
Instruction Manual - Page 20
... OPC-871 HEADSET ADAPTER install as those from the David Clark Co.
wUnscrew the 4 screws, then remove the bottom cover. (Fig. 1) e Insert the connector as shown below. (Fig. 2) r Mount the ...
Instruction Manual - Page 21
• Use the upper side mounting hole. • You can mount the attachment on either side of the transceiver. • Bent the plastic dust cover before install the strain relief into the notch. Fig. 2
OPC-871 9
Fig. 3 18
Instruction Manual - Page 22
...contents from one set and provide a quick and easy programming of items, including memory channels, memory names and set mode contents, etc. Very convenient when programming cloning process. 10...18)
CS-A110 CLONING SOFTWARE Provides quick and easy programming of Microsoft Corporation in the U.S.A. Microsoft and Windows are registered trademarks of items, including private channels, scan ...
Similar Questions
How Can I Open The Ic 7200 For Transmission On Marine Channels?
I have been adviced that it is possible to modify so that I for safety reasons only, can trx on mari...
I have been adviced that it is possible to modify so that I for safety reasons only, can trx on mari...
(Posted by Runeedamm 5 months ago)
My Icom Ic-2300h Can't Change Frequency,it's Only In 144mhz
(Posted by knightofthecentury 9 months ago)
Icom A110 Is Stuck In Mr Mode
Icom A110 is stuck in MR mode. V/M button beeps when I press it but cant switch
Icom A110 is stuck in MR mode. V/M button beeps when I press it but cant switch
(Posted by mikedes156 1 year ago)
I Want To Feed Icom Ic A110 By Adaptator For Laptop , So What The Minimum
I want to power my AC-A110euro by an adapter for pc, so what is the minimum housingisms of the curre...
I want to power my AC-A110euro by an adapter for pc, so what is the minimum housingisms of the curre...
(Posted by mebaah 2 years ago)
Delete Memory Programming
Hi, i kindly request to you, please let me know how I can to delete memory programmed into the my ra...
Hi, i kindly request to you, please let me know how I can to delete memory programmed into the my ra...
(Posted by popeye7mares 3 years ago)