Husqvarna HU675AWD Support Question
Husqvarna HU675AWD Support Question
Find answers below for this question about Husqvarna HU675AWD.Need a Husqvarna HU675AWD manual? We have 2 online manuals for this item!
Question posted by lynnjimenez14 on October 28th, 2017
Drive Cable Issues
The drive cable came unattached from the bottom, how do I attach it? I could not find the location. I have a hu675awd. Thank you
Current Answers
Answer #1: Posted by hzplj9 on October 29th, 2017 2:59 PM
hzplj9
Member since:
June 25th, 2012 Points: 4,875,670
Member since:
June 25th, 2012 Points: 4,875,670
Thje cable you refer to controls the speed of the unit. This would go to the top of the engine compartment. Refer to the user guide for adjustment. Link attached:
https://www.manualslib.com/manual/779905/Husqvarna-961430108.html#product-HU675AWD
The parts list may offer more help on the correct fitment.
https://www.manualslib.com/manual/592422/Husqvarna-Hu675fe.html
Hope that helps.
Related Husqvarna HU675AWD Manual Pages
Owners Manual - Page 2
... against a wall or obstruction. never run.
• Disengage the self-propelled mechanism or drive clutch on the handle and walk;
DO:
• Mow across the face of other ... toys, wire, bones, sticks, etc., which can result in the manual(s) before operating a riding lawn mower.
GENERAL OPERATION
• Read, understand, and follow all times.
• Only allow children to ...
Owners Manual - Page 3
... ground.
Allow machine to prevent accidental starting.
• Keep nuts and bolts, especially blade attachement bolts, tight and keep wire away from a gasoline dispenser nozzle. • Keep the nozzle.... The instructions will enable you to give you cannot easily remedy, please contact your lawn mower properly. Clean oil or fuel spillage.
lbs. Please read and retain this manual. ...
Owners Manual - Page 4
...KNOB
FIG. 1
BOLT
LOWER HANDLE
LOWER HANDLE "STANDARD" KNOB
HANDLE BRACKET
FIG. 2
4 TO REMOVE LAWN MOWER FROM CARTON
1. Cut down two end corners of this manual in handle brackets.
2.
Use the correct tools...UP
HOW TO SET UP YOUR LAWN MOWER
TO UNFOLD HANDLE (See Figs. 1 and 2)
IMPORTANT: UNFOLD HANDLE CAREFULLY SO AS NOT TO PINCH OR DAMAGE CONTROL CABLES.
1. To ensure safe and ...
Owners Manual - Page 5
... HANDLE
VINYL BINDINGS
FIG. 3
FRAME OPENING
CONTROL BAR
UPPER HANDLE
ROPE GUIDE
T-KNOB
ENGINE STARTER ROPE
FIG. 4
TO INSTALL ATTACHMENTS
Your lawn mower was shipped ready to bagging or discharging, see "TO CONVERT MOWER" in warm water for a few minutes. Make sure the frame handle is outside of this manual.
5 INSTALL STARTER ROPE (See...
Owners Manual - Page 6
... CATCHER
WHEEL HEIGHT ADJUSTER (ON EACH WHEEL)
HANDLE KNOBS
GASOLINE FILLER CAP AIR FILTER DRIVE COVER
ENGINE OIL CAP WITH DIPSTICK
HOUSING
SPARK PLUG
MUFFLER
IMPORTANT: This lawn mower is shipped WITHOUT OIL OR GASOLINE in literature supplied with the location of the American National Standards Institute and the U.S. Consumer Product Safety Commission. used...
Owners Manual - Page 7
..., 9-position adjusters (if so equipped) allow lever to be positioned between drive control cable and jam nut.
2. ENGINE ZONE CONTROL
OPERATOR PRESENCE CONTROL BAR
DRIVE CONTROL BAR
CAUTION: Federal regulations require an engine control to be installed on this lawn mower in severe eye damage. The closer to suit your requirements. Hold operator presence control...
Owners Manual - Page 8
...assure fuel freshness.
Purchase fuel in the Maintenance section of this manual. OPERATION
TO CONVERT MOWER
Your lawn mower was shipped ready to be used as a mulcher. For type and grade of operation ...9
FIG. 10
ADD GASOLINE (See Fig. 10)
• Fill fuel tank to bottom of the lawn mower and place the grass
catcher frame hooks onto the grass bag brackets. • To convert to rear...
Owners Manual - Page 9
... flow and extend engine life.
It may occur. Use fresh fuel next season. Never use de-thatcher blade attachments on the engine, a small amount of smoke may require that the lawn mower cuts off with the mulching action.
Always mulch with an automatic choke system. At this will not be noticed.
Do...
Owners Manual - Page 10
...;lter element assure proper air-fuel mixture and help your unit. Check for Loose Fasteners Clean / Inspect Grass Catcher * Check Tires Check Drive Wheels *** Clean Lawn Mower **** Clean under Drive Cover *** Check Drive Belt / Pulleys *** Check / Sharpen / Replace Blade Lubrication Clean and Recharge Battery **
Check Engine Oil level Change Engine Oil Clean Air Filter Inspect...
Owners Manual - Page 11
... lawn mower on the blade adapter. Remove blade and attaching hardware (bolt, lock washer and hardened washer).
6. Replace adapter if damaged. Install the blade bolt with heavy cloth. Remove blade bolt by the manufacturer of the
belt retainer.
11
CENTER HOLE
5/8" BOLT OR PIN
BLADE
FIG. 13 Remove debris shield. DRIVE WHEELS
Check wheels...
Owners Manual - Page 12
... either end of oil, rechecking the
dipstick until the blade is empty. 1.
Tip lawn mower on a clean surface. 3.
Select the oil's SAE viscosity grade according to clean ...drive should remain in one year. Always be kept clean and free of operation or every season, whichever occurs first. Wait a minute to allow oil to the proper level at least once a year if the lawn mower...
Owners Manual - Page 13
...drive system during the washout process. 2.
CAUTION: Disconnect spark plug wire from spark plug and place wire where it could create a fire hazard and/or damage. To use this manual) and let engine run until the underside of the lawn mower... engine (as it cannot come in the Operation section of your lawn mower by scraping to remove build-up any spilled gasoline. Water in ...
Owners Manual - Page 14
... deflector, attached between the rear wheels of your mower, is provided to...mower into the operator's mowing position. Disconnect cable from rear baffle / rear gearcase belt keeper.
6.
TO REMOVE DRIVE BELT (See Figs. 18 & 19)
1. DRIVE COVER
REAR BAFFLE
DEBRIS SHIELD
BLADE HARDENED WASHER LOCKWASHER BLADE BOLT
FIG. 18
14 Release control bar and stop engine. 2. Turn lawn mower...
Owners Manual - Page 15
...
16. Reinstall rear gearcase pulley.
3. Install new belt on rear gearcase pulley.
Reinstall drive cover.
10. Return mower to assure proper fit and long life.
1. Remove all three idler pulleys.
...to front gearcase pulley.
4. lbs.
15.
Reattach cable to original factory setting (no "gap"). Return drive control cable adjustment to rear gearcase.
11. Be sure the ...
Owners Manual - Page 16
... you believe that the engine is not adjustable.
LAWN MOWER
When lawn mower is to an authorized service center for repair and/or adjustment. Clean entire lawn mower (See "CLEANING" in handle with bolt and ...OR TRANSPORTATION, BE SURE TO FOLD THE HANDLE AS SHOWN OR YOU MAY DAMAGE THE CONTROL CABLES.
16 While holding handle assembly, remove knob and carriage bolt from the storage position, ...
Owners Manual - Page 17
...cylinder.
3.
Rust and/or dirt in any enclosure.
17
CAUTION: Never store the lawn mower with a suitable protective cover that does not retain moisture. Plastic cannot breathe, which allows... plastic.
Add stabilizer to distribute oil.
4. Remove spark plug.
2. IMPORTANT: NEVER COVER MOWER WHILE ENGINE AND EXHAUST AREAS ARE STILL WARM. CYLINDER
1. ENGINE OIL
Drain oil (with ...
Owners Manual - Page 18
... Grass is too high or wheel height is disconnected.
5.
Drive cable worn or broken. 4. Tighten blade bolt or replace blade adapter.
8. Buildup of mower housing.
5. Raise cutting height.
2. Check oil level. 6. Move lawn mower to cut - Replace blade. 3. Hard to handle.
9. Belt wear. 2. Check/replace drive belt. 2. Fill fuel tank.
3. Empty fuel tank and re...
Owners Manual - Page 19
...:
(a) Engines and Attachments.Except where otherwise indicated on Exhibit A, all Engines and Attachments are NOT manufactured by ...free from . Depending on ExhibitA, Transmission / Transaxle (including Drive Systems) are NOT covered. Reconditioned or Refurbished Products have ... maintenance, storage, fuel and oil usages as throttle cable, belt guides adjustments; and
c. Damages resulting from ...
Parts List - Page 3
...Hex Washer Head Fastener, Push Mounting Bracket, Rear Skirt Clip, Cable Front Shroud Assembly Screw Operator's Manual, English / Spanish
3
NOTE: All component dimensions given in U.S. HUSQVARNA ROTARY LAWN MOWER - MODEL NO. NO.
1
532 42 79-71
2
532...to do so could be hazardous, damage your lawn mower and void your warranty. HU675AWD (96143010801) PRODUCT NO. 961 43 01-08
KEY PART NO.
Parts List - Page 5
... to do so could be hazardous, damage your lawn mower and void your warranty. HUSQVARNA ROTARY LAWN MOWER - HU675AWD (96143010801) PRODUCT NO. 961 43 01-08
KEY... 77-25
DESCRIPTION
Drive Control Assembly (Includes Cable) Mounting Bracket, Idler Pulleys Gearcase Assembly, Front, Complete Bar, Drive Control Pinion Belt, Drive Gearcase Assembly, Rear, Complete Pulley, Drive Wheel Adjuster Assembly,...
Similar Questions
Drive Cable Replacement
can you tell me how to replace drive cable on hu675 awf
can you tell me how to replace drive cable on hu675 awf
(Posted by vbandpb 1 year ago)
What Is A 2012 Husqvarna Hu 775l Lawn Mower In Very Good Condition Worth ?
What is a 2012 Husqvarna HU 775L lawn mower in Very good condition worth ?
What is a 2012 Husqvarna HU 775L lawn mower in Very good condition worth ?
(Posted by kpcastles 7 years ago)
How To Change The Drive Cable?
The drive cable has broke at the top near the handle, it's like the metal is frayed. How do we repla...
The drive cable has broke at the top near the handle, it's like the metal is frayed. How do we repla...
(Posted by jengardner77 8 years ago)
My Husqvarnarz4623 Lawn Mower
My husqvarna lawn mower will not start. It wont even try to turn over or click.
My husqvarna lawn mower will not start. It wont even try to turn over or click.
(Posted by teresaandbryancates 9 years ago)