Honeywell TH5220D Support Question
Honeywell TH5220D Support Question
Find answers below for this question about Honeywell TH5220D.Need a Honeywell TH5220D manual? We have 1 online manual for this item!
Question posted by Taiatvc on February 5th, 2016
What Should The Factory Settings Be?
I changed other settings while trying to change the temperature settings. Now my heat is blowing cold. What should the factory settings be?
Current Answers
Answer #1: Posted by BusterDoogen on February 5th, 2016 8:08 PM
BusterDoogen
Member since:
October 30th, 2011 Points: 28,565,447
Member since:
October 30th, 2011 Points: 28,565,447
Make sure you didn't set the system to auto shown on page 14. Most sytem's default to 63 in winter & 78 in summer.
I hope this is helpful to you!
Please respond to my effort to provide you with the best possible solution by using the "Acceptable Solution" and/or the "Helpful" buttons when the answer has proven to be helpful. Please feel free to submit further info for your question, if a solution was not provided. I appreciate the opportunity to serve you!
Related Honeywell TH5220D Manual Pages
Owner's Manual - Page 1
Operating Manual
TH5220D
Non-programmable Digital Thermostat
Owner's Manual - Page 3
FocusPRO™ TH5220D Non-programmable Digital Thermostat
Table of contents
About your new thermostat Thermostat features 2 Setup at a glance 3 Quick reference to controls............4 Quick reference to display 5
Programming & Operation Fan setting (auto/on 6 System setting (heat/cool/auto)........7 Auto-changeover (heat/cool) ..........8 Compressor protection 9
Appendices Battery ...
Owner's Manual - Page 4
It has been designed to give you many years of your new Honeywell thermostat. even in the dark. • Displays both room temperature and temperature setting. • Removable battery holder for fast, easy replacement. • Built-in compressor protection.
2 Features
• One-touch temperature control. • Large, clear, backlit display is easy to -use, push-button...
Owner's Manual - Page 5
..., if needed : 1 Fan (Auto/On): Preset to Auto To change if needed .
3 Heat): Preset to Heat ..........To change, see page 6
Auto is the most commonly used setting, but you may prefer On for improved air circulation. 2 System (Heat/Cool/Auto/Em. FocusPRO™ TH5220D Non-programmable Digital Thermostat
This thermostat is pre-programmed by the installer and ready to...
Owner's Manual - Page 6
Function buttons Press to set preferred temperature. Operating Manual
Quick reference to controls
Digital display (see page 5)
Battery holder (see page 10)
Temperature buttons Press to select the function displayed just above each button. (Functions change depending on the task.)
4
Owner's Manual - Page 7
... Thermostat
Quick reference to display screen
Low battery warning (seepage 10)
Current inside temperature
Auxiliary heat (Only for heat pumps with auxiliary heat)
Inside
75°
Replace Battery
Heat Setting
75°
Auxiliary Heat On
Fan setting Auto/On (see page 6)
Fan Auto
System Heat
Function buttons Press the button beneath each function to view or change settings (functions change...
Owner's Manual - Page 8
Use this setting for improved air circulation, or for more efficient air cleaning.
6 In "Auto" mode (the most commonly used setting), the fan runs only when the heating or cooling system is on. Operating Manual
Select the fan setting
Fan Auto
System Heat
Fan
System
On
Heat
Press the FAN button to "On," the fan runs continuously.
If set to select Auto or On.
Owner's Manual - Page 9
...™ TH5220D Non-programmable Digital Thermostat
Select the system setting
Fan Auto
Fan Auto
System Heat
System Cool
Note: The Auto and Em Heat system settings may not appear, depending on the indoor temperature. • Em Heat (only for heat pumps with auxiliary heat):Thermostat controls Emergency and Auxiliary Heat. Press the SYSTEM button to select:
• Heat: Thermostat controls...
Owner's Manual - Page 10
....When the system is set temperatures is fixed, and cannot be at least 3 degrees apart.The thermostat will automatically adjust settings to Auto, the thermostat automatically selects heating or cooling depending on how your thermostat was installed.
Heat and cool settings must be changed.
8 The 3-degree separation between heating and cooling set to maintain this 3-degree separation...
Owner's Manual - Page 11
... will flash the message Cool On (or Heat On if you have a heat pump).When the safe wait time has elapsed, the message stops flashing and the compressor turns on.
9 FocusPRO™ TH5220D Non-programmable Digital Thermostat
Built-in compressor protection
Inside
75°
Fan Auto
Cool Setting
75°
Cool On
System Cool
This...
Owner's Manual - Page 12
...
Press and pull to remove
Replace Battery
Insert fresh AA alkaline batteries, then reinstall battery holder
Batteries are optional (to provide backup power) if your thermostat was wired to the display during power interruptions.All other settings are depleted.
Owner's Manual - Page 13
... thermostat is battery powered, make sure fresh AA alkaline batteries are set to acceptable ranges: • Heat: 40° to 90°F (4.5° to 32°C). • Cool: 50° to 99°F (10° to 37°C).
11 Most problems can be corrected quickly and easily.
Temperature settings do not change
Make sure heating and cooling temperatures...
Owner's Manual - Page 14
... damage to the compressor (see page 9).
12
Wait 5 minutes for the system to respond.
Operating Manual
In case of difficulty
Heating or
•
cooling system
does not respond •
Press SYSTEM button to set higher than the Inside temperature.
• Check circuit breaker and reset if necessary.
• Make sure power switch at...
Owner's Manual - Page 15
... plate assembly ........Part No. 50002883-001 (Use to cover marks left by old thermostats.)
13
To save time, please remove the battery holder and note your model number and date code before calling. FocusPRO™ TH5220D Non-programmable Digital Thermostat
Customer assistance
Model number xxxxxxx
Date code xxxxxxx
For assistance with this product...
Owner's Manual - Page 17
Honeywell's sole responsibility shall be to you.
15 Some states do not allow the exclusion or limitation of a consumer. FocusPRO™ TH5220D Non-programmable Digital Thermostat
Limited 5-year warranty
This warranty does not cover removal or reinstallation costs.This warranty shall not apply if it is shown by Honeywell that the ...
Similar Questions
How Do I Get The Thermostat To Change Temperatures?
my thermostat is staying at 68 and I want to lower the temp.( I changed the batteries
my thermostat is staying at 68 and I want to lower the temp.( I changed the batteries
(Posted by hpomahac 4 months ago)
Model Th5220d Fan Will Not Shut Off, Doesn't Matter If In Heat Or Cool Mode.
(Posted by cdschlomer 3 years ago)
Honeywell Thermostat Won't Change Temperature T8400c
(Posted by rmw44jakuti 10 years ago)
Auto Setting Malfunction
When programming is set to AUTO position thermostat settings have no effect on heat or cool settings...
When programming is set to AUTO position thermostat settings have no effect on heat or cool settings...
(Posted by mikemartin 12 years ago)