GE DSXH47GGWW Support Question
GE DSXH47GGWW Support Question
Find answers below for this question about GE DSXH47GGWW - 5.8 cu. Ft. Gas Dryer.Need a GE DSXH47GGWW manual? We have 1 online manual for this item!
Question posted by fortseward on March 26th, 2011
Gas Dryer Will Not Heat
Everything else works, led lights, motor,door switch, but the heating element stopped heating. I checked the continuity, that is good.Does the element need to be removed from the dryer to check continuity? This dryer is new and has worked for 6 months. The element is not broken. The vent is not clogged.
Current Answers
Related GE DSXH47GGWW Manual Pages
Owners Manual - Page 1
... 8
Installation Instructions 9-18
Electrical Installation for Electric Dryer 16, 17 Electrical Requirements 11 Exhausting the Dryer 12, 13 Gas Connection for Gas Dryer 18 Gas Supply Requirements 13 Location of Your Dryer 14 Mobile Home Installation 15 Preparing to Install Your Dryer . . . . . .9, 10 Reversing the Door Swing 18
Troubleshooting Tips 19-21
Consumer Support
Consumer Support...
Owners Manual - Page 2
...and service must be minimized further by a qualified installer, service agency or the gas supplier. Properly adjusted dryers will minimize incomplete combustion.
Exposure to prevent property damage, personal injury, or death.... in this or any electrical switch; WHAT TO DO IF YOU SMELL GAS:
1 Do not try to light a match, or cigarette, or turn on any gas or electrical appliance.
2 Do...
Owners Manual - Page 3
...IT COLLAPSES OR BECOMES OTHERWISE RESTRICTED IN USE OR DURING INSTALLATION.
Exhaust/Ducting:
1 This dryer MUST be exposed to temperatures below freezing or exposed to the weather.
■ Connect ...properly rated, protected and sized power supply circuit to avoid electrical overload.
■ Remove all sharp packing items and dispose of all governing codes and ordinances. Safety Instructions ...
Owners Manual - Page 4
... as acetone, denatured alcohol, gasoline, kerosene, some household cleaners, some spot removers, turpentines, waxes, wax removers and products containing petroleum distillates.
■ The laundry process can under certain circumstances produce fire by removing the fuse or switching off vapors that could result from Heat or Do Not Tumble Dry (such as detergents, bleaches, etc.) out of...
Owners Manual - Page 5
....
■ If yours is a gas dryer, it is damaged, malfunctioning, partially ...light. Place the cord away from traffic areas so it will not be safely used in them by use either a fabric softener in published user-repair instructions that their product can be stepped on, tripped over or subjected to damage.
■ Before discarding a dryer, or removing it from service, remove the dryer door...
Owners Manual - Page 6
... a selected time.
Start
Close the dryer door. Control Settings
Drying Cycles
The REGULAR, PERMA PRESS and DELICATE cycles automatically sense fabric dryness. Control Lock
To prevent accidentally starting or stopping the dryer, press OPTIONS and SELECT at the desired drying time.
NO HEAT For fluffing items without heat. This cycle is lighted. LOW For knits, delicates, synthetics...
Owners Manual - Page 7
...remove the load. It provides approximately 15 minutes of the signal.
The dryer light is on hangers so wrinkles won 't set in the dryer.
7 Before replacing the light bulb, be used with an appliance bulb of the lint screen opening .
Unheated tumbling continues...controls to unplug the dryer power cord or disconnect the dryer at the sound of no-heat tumbling after the clothes...
Owners Manual - Page 8
..., they are sorted properly for use . Bounce® Fabric Conditioner Dryer Sheets have been approved for the dryer. Remove by your dryer caused by some laundry pretreatment soil and stain remover products. To remove this buildup, wash the lint screen in place.
The Exhaust Hood: Check from the dryer. 3 Vacuum the duct with a damp cloth. Always follow the fabric...
Owners Manual - Page 9
...) duct is installed, it could be minimized further by a barrier. This dryer is designed under the Warranty. • Remove and discard existing plastic or metal foil
duct and replace with the customer.)
• The National Fuel Gas code restricts installations of gas appliances in Canada, CAN/CGA B149.12. IN THE COMMONWEALTH OF MASSACHUSETTS...
Owners Manual - Page 10
...)
Carpenter's level
Flat or straight blade screwdriver (may be needed for cord strain relief)
Duct tape Rigid or UL-listed flexible metal 4″ (10.2 cm) duct
Vent hood 1/4″ nut driver (remove terminal block access cover and install cord) (ELECTRIC DRYER)
Pipe thread sealer (GAS DRYER)
UL-listed strain relief (may be supplied with cord...
Owners Manual - Page 11
... ordinances, or in the absence of the dryer in accordance with the NATIONAL ELECTRICAL CODE, ANSI/NFPA NO. 70. ELECTRICAL CONNECTION INFORMATION FOR GAS DRYERS
WARNING - or 20-amp circuit breaker or...8226; DO NOT, UNDER ANY CIRCUMSTANCES, CUT OR REMOVE THE THIRD GROUNDING PRONG FROM THE POWER CORD. Electrical Requirements
• This dryer must be supplied with local codes and ordinances, or ...
Owners Manual - Page 12
... common duct with a kitchen exhaust system. and moisture-tight by at least 4 ft. CONNECTING THE DRYER TO HOUSE VENT
RIGID METAL TRANSITION DUCT
• For best drying performance, a ...terminate exhaust in a chimney, a wall, a ceiling,
gas vent, crawl space, attic, under an enclosed floor, or
in "Connecting the Dryer to reduce condensation and lint buildup.
Correct
Do
Incorrect
Don't...
Owners Manual - Page 13
... line MUST have an individual shutoff valve.
5. EXHAUST DIRECTION
All dryers are shipped set up for test gauge connection, MUST be disconnected from the gas supply piping system during any pressure testing of the gas supply connection to the dryer.
6. They will need Exhaust Kit Pub. WARNING: Never reuse old flexible
connectors. A 1/8″ (0.32 cm...
Owners Manual - Page 14
...sq. Your dryer needs the space around it will obstruct the flow of installation:
FRONT
SIDES REAR
TOP
Alcove, stack, 3" (7.6 cm) undercounter or closet
0 (0 cm) 3" (7.6 cm) 0 (0 cm)
THIS DRYER MUST BE ...and ventilation air.
3. in the same closet as the GAS DRYER.
3.
DO NOT INSTALL YOUR DRYER IN A CLOSET WITH A SOLID DOOR.
4. The following clearances for proper operation in Recess or...
Owners Manual - Page 15
...
28 1/2″ (72.4 cm) to the mobile home structure.
3. Gas dryers MUST be 4″ (10.16 cm) in diameter with American National Standard...Gas supply pipe on rear of unit
36″ (91.4 cm)
13 1/2″
2 3/8″
(34.3 cm)
(6.03 cm) To rear and base exhausts 27″
(68.6 cm)
FRONT VIEW
48 1/2″ (123.2 cm) to clear open door
Incorrect
Don't
Don't
Don't
The dryer...
Owners Manual - Page 16
...be grounded.
Check with a licensed electrician if you are not designed to follow these instructions can result if the dryer is properly ...grounding conductor must be cut or remove the grounding prong from this manual for your dryer is equipped with a three-prong ...grounded.
For a grounded, cord-connected gas dryer:
• This dryer is equipped with local codes and ordinances,...
Owners Manual - Page 17
... the terminal block access cover and the strain relief mounting bracket located on the back of the dryer upper corner.
2. Finger-tighten the nut only at connections.
6. Remove the green neutral ground wire from the dryer harness to the silver-colored center terminal on the terminal block. Attach the white (neutral) power cord...
Owners Manual - Page 18
...; (1.27 cm to the 3/8″ (0.96 cm) pipe located on , the safety switch will light, it is off . Turn on top of the dryer. Remove the four screws that nothing (such as boxes, clothing, etc.) obstructs the flow of door opening . NOTE: On gas dryers, before making another attempt to ensure the power is necessary for a connection...
Owners Manual - Page 19
... each load.
Overloading
• Separate large loads into the outlet.
• Check the building's fuse/circuit breaker box and replace fuse or reset breaker.
Fuse is blown/circuit breaker is tripped, the dryer may tumble but not heat
Gas service is off
LP gas supply tank is pushed completely into smaller ones.
Safety Instructions Operating...
Owners Manual - Page 20
...Remove items while they still hold a slight amount of moisture.
Lint filter is a well-sorted dryer load). Improper or obstructed ducting • Check...was used (electric, natural or LP gas), size of load, types of fabrics, wetness...dryer after drying.
• If you are concerned about shrinkage in the dryer
• Some items may be safely washed, but will vary according to the type of heat...
Similar Questions
My Ge Profile Gas Dryer Does Not Heat Up.
Hi I have a ge profile gas dryer model dpvh880gjmv. It does not heat up but everything else seems fi...
Hi I have a ge profile gas dryer model dpvh880gjmv. It does not heat up but everything else seems fi...
(Posted by kaganriverranch 3 years ago)
Just Bought A Ge Gfds170ghww Gas Dryer. Drum Not Running
Just bought a GE GFDS170GHWW gas dryer. Plug into 120V outlet(manual said 120v). Push the power butt...
Just bought a GE GFDS170GHWW gas dryer. Plug into 120V outlet(manual said 120v). Push the power butt...
(Posted by tomzhou 8 years ago)
Gas Dryer Btu's
What is the input Btu/hr for this gas dryer and what is the total input Btu/hr of this gas dryer?
What is the input Btu/hr for this gas dryer and what is the total input Btu/hr of this gas dryer?
(Posted by rarolin 10 years ago)
I Have A Ge Model Dsxh47ggoww Gas Dryer And All It Does Is Beep It Still Works
theAlthea gas dryer works fine but all it does is beep every 40 secs on and off
theAlthea gas dryer works fine but all it does is beep every 40 secs on and off
(Posted by Tzona928 10 years ago)
My Gas Dryer Won't Stop Beeping.
My gas dryer won't stop beeping. All the lights flash and even though I press pause/cancel, the beep...
My gas dryer won't stop beeping. All the lights flash and even though I press pause/cancel, the beep...
(Posted by florencetedesco 13 years ago)