Craftsman 27675 Support Question
Craftsman 27675 Support Question
Find answers below for this question about Craftsman 27675 - Professional 5 in. 3.0 Amp Random Orbit Sander.Need a Craftsman 27675 manual? We have 1 online manual for this item!
Question posted by brian11879 on June 28th, 2012
What Should I Oil My Dual Motioin Sander With?
Craftsman Dual Motion Sander 315 22461
Current Answers
Related Craftsman 27675 Manual Pages
Operation Manual - Page 1
... www.sears.com/craftsman
c(@o+
3025736
Certified to CAN/CSAC22.2 No.745-1,745-2-4 Conforms to UL STD 745-1,745-2-4
Double Insulated
• WARRANTY • SAFETY • UNPACKING • DESCRIPTION • ASSEMBLY • OPERATION • MAINTENANCE
Operator's Manual
3.0 Amp/5-in this manual before using this product. Diameter
Random Orbital Sander
Model No. 172.27675
CAUTION: Read...
Operation Manual - Page 5
... practical ways to secure and support the workpiece to a stable platform. O ®
@
5
27675 2/11/08 Failure to follow all instructions before storage to Ilelp prevent possible fire I
I
1. ... oil finishes have the tool serviced before making any adjustments, changing accessories or storing the tool. ALWAYS use the tool if switch does not turn it "On" or "Off". Use the correct tool ...
Operation Manual - Page 6
...electric shock.
6. Applicable only to carry the tool by Underwriters Laboratories (UL). BEFORE plugging in serious injury.
6 BE SURE to pull the plug from heat, oil, sharp edges or moving parts.
7. Keep... cord. Other extension cords can cause a drop in line voltage, resulting in length. For this tool an AWG (American Wire Gauge) size of a least 14-gauge is grounded.
5. or less ...
Operation Manual - Page 7
...
A Hz
W
rain
Amps Hertz
Watts
Minutes
_., ...no RPM SPM OPM Z
Alternating current Direct current
No-load speed Class II construction, Double Insulated Revolutionsper minute Strokes per minute Orbits per minute Indicates danger, warning or caution. SAFETY RULES FOR POWER SANDERS
1. Following this manual. Let the sander and the grit on your tool may include the...
Operation Manual - Page 8
... To reduce risk, empty dust bag frequently and strictly follow sander manual and coating manufacturer's instructions.
/_ CAUTION: When working on... generated. Due to the danger of fire, do this tool can self-ignite in a well-ventilated area. •...prolonged contact with dust from sanding :surface coatings (polyurethane, linseed oil, etc.) can generate and/or disburse dust, which may ...
Operation Manual - Page 10
... Center. If someone borrows this tool. orle fine grit, and one medium grit. 5. ALWAYS check the tool for . 3. SAVE THESE INSTRUCTIONS. Remove the sander from the carton and inspect it...tool's operation. Check for misalignment or binding of moving parts, breakage of parts, and any of the packing materials until all parts are included; Included with your nearest Sears store or Craftsman...
Operation Manual - Page 11
... (DC). I
Your Professional 5" Random Orbit Sander has a precision-built ...dual dust ports
4. Operator's Manual
KNOW YOUR RANDOM ORBIT SANDER (Fig. 2)
NOTE: Before attempting to provide a swirl free finish.
4. Precision-tuned counterbalanced system reduces vibration for a variety of power and the motor will overheat. Sander
2. Vac Adapter with Pre-Punched Holes
5. Powerful 3.0 amp...
Operation Manual - Page 12
...for dust collection. High impact-resistant housing helps protect tool fron7 damage and reduces weight. 9. Diameter Hook and Loop Discs ...orbits per minute) variable speed 120 Volts, 60 Hz AC 3.0 Amps 1/16-in.
5-in backing pad and sanding disc. This Random Orbit Sander has the following features cont.:
6. Fig 2
Comfort Grip Handle
Speed Dial
On/Off Rocker Switch
Vac Adapter with dual...
Operation Manual - Page 13
... up with holes in the backing pad in order for the dust collection feature of the sander to unplug the sander could cause serious personal injury. Align the holes in the sanding disc with Pre-Punched Holes
13
27675 2/11/08 I saOnTdEin:g Fdoirscbebsatckaidnhgesoioccna, siwoenarlleycobmymbernudshitnhgat thyoeum clliegahntlythweithbaacksinmgallpabdruashn.d the
Fig 3
Backing Pad
Hook and Loop...
Operation Manual - Page 14
...(',seeFig. 4).
3. A WARNING: Failure to unplug the sander could result in accidental starting J
causing possible serious personal ...adapter, and reattach vac adapter and dust bag assembly onto the sander. Turn dust bag assembly counterclockwise (embossed arrows show unlock and... AND EMPTY DUST BAG (See Fig. 4 and 4a) 1, Unplug the sander. Wipe dust and debris from vac adapter (see Fig. 4a, 4b).
...
Operation Manual - Page 15
...27675 2/11/08 This will allow tlhe air to dust exhaust hole of sander (see Fig. 5).
4. Unplug the sander. Remove dust bag assembly from the vac adapter (see Fig. 5a and 5b).
5.
Turn vac on while operating sander. Connect vac adapter with dual... Fig. 5) When sanding for extended periods of sander
15
Connect 2'/2-in vac hose onto the vac adapter's dual dust ports ( see page 14, Fig. 4a...
Operation Manual - Page 16
... ARE MISSING, DO NOT OPERATE YOUR SANDER UNTIL THE MISSING PARTS ARE REPLACED.
ATTACHING VAC HOSE TO THE DUST COLLECTION SYSTEM cont. Do not use any tool, be thrown into the face or eyes... which could result in possible serious injury.
/{k WARNING: Collected sanding dust from sanding surface coatings (polyurethane, linseed oil, etc.) can self...
Operation Manual - Page 17
.... 5. Rotate the dial from steel surfaces with workpiece. 3. Extended periods of sandpaper, • Removing rust from 1 to cool the motor.
17
27675 2/11/08
OT use your sander for the applications listed below. • Sanding wood surfaces with 1 being the lowest speed and 6 the highest speed. VARIABLESPEEDSWITCH(seeFig.7) Thevariablespeeddialallowsmatchingthecorrect speedsto...
Operation Manual - Page 18
...sanding finish. 1. Natural abrasives such as flint and garnet are best for economical use the sander without load (off the workpiece).The backing pad should not tak:e Ilonger than 6 seconds... pressure will only slow down the motor, wear the sandpaper out faster and reduce the sander's orbital speed. • Excessive pressure will overload the motor and cause possible damage to stop ...
Operation Manual - Page 19
... resin coating or linseed oil finishes have been sanded. /_ WARNING: Empty dust bag before removing from workpiece. This orbital action duplicates a "hand sanding" motion for heavy-duty sanding applications, such as you push the sander forward. Smoothing rough wood
3. Upon completion of this sander. Removing old finishes
Fig. 9
2.
Fig. 10
19
27675 2/11/08 in diameter...
Operation Manual - Page 20
... oil, grease ancI sawdust or woodchips, and store tool in contact with compressed air.
2. Illoperation is needed under normal operating conditions. I
1. When work on any fiberglass material, wallboard, spackling compound or plaster. No further lubrication is dusty, also wear a dust mask. Clean the tool with plastic parts. LUBRICATION
Your Craftsman @ProfessionaJ Orbital Sander...
Operation Manual - Page 21
...: Remember how they are positioned so that the brushes move freely in .
Check the ends of sander and remove top cover (see Fig. 11c), attach new assemblies to the armature. To replace assemblies...carbon brushes (see Fig. 11a). Fig. 11
Fig. 11b
Red wire lead terminals
Fig. 11c
Carbon
21
27675 2/11/08 Locate the (2) Carbon Brush / Brush Holder Assemblies (see Fig. 11b) for wear. If...
Operation Manual - Page 22
... shop sears.com/craftsman for all of Cr;aLftsmanProfessional Random Orbit Sander accessories designed for your sanding applications. 5-inch, 8 Hole, Hook and Loop Sanding Discs come in very fine, fine, medium and coarse grit. Visit your local Sears store or other Craftsman®outlets offer a selection of the accessories for all your random orbital sander.
22 /_recoWmAmReNnIdNeGd : for...
Operation Manual - Page 23
Q t._
I%1
C2_
5-in. Random Orbital Sander
MODEL NUMBER 172.27675
1_ 1_-_22(7)
The model number will be found on the nameplate of the Random Orbital Sander. Always mention the model number when requesting parts and service for your tool.
_24(6)
_26_103
i
27(2)J
Ig 28 29
104
®
4O Dia.
Operation Manual - Page 24
...Fan
1
Bracket seat
!
5-in.
Always mention the model number when requesting parts and service for your tool. Dia. Brushholder ssembly
2
Carbon brush
2
Power cord
1
Speed adjustment knob
1
Variable speed board
... O ring 3x34
Qty.
1 7 1 6 1 1 1 2 1 1 2 1 1 1 1 1 1 1 1 1 1 1 Random Orbital Sander
MODEL NUMBER 172.27675
The model number will be found on the nameplate of the...
Similar Questions
Is This Sander Still Available For Purchase?
(Posted by pkrusac 10 years ago)
What Weight Oil Should I Use For A 3800cp Power Washer
(Posted by johnddherrera 11 years ago)
Oil Change
Where exactly is the old oil drained from? Is it by removing the site glass and draing through there...
Where exactly is the old oil drained from? Is it by removing the site glass and draing through there...
(Posted by jkmorrison47 12 years ago)
Battery Powered Chain Saw(oil Leak)
I purchased a craftsman battery powered chain saw for my husband and we are finding that it leaks oi...
I purchased a craftsman battery powered chain saw for my husband and we are finding that it leaks oi...
(Posted by pamkrzystof 13 years ago)