Taking Apart The Filter From The Tube?

During normal use, the filter system is self-cleaning. You should occasionally inspect it for foreign objects and clean it when necessary.

To Remove the Large Object Trap/Cylinder Filter Assembly:

1. remove the bottom rack.

2. Grasp the assembly as shown in figure 28 and turn it counter-clockwise 1/4 turn.

3. lift out the assembly as shown in figure 29.

4. Carefully examine the assembly. If you find debris in the Large Object Trap, turn it upside-down and gently tap it on a surface such as a countertop to dislodge and remove the debris & flush the Cylinder filter clean by holding it under running water.

To Remove the Fine Filter:

1. Lift the Fine Filter from the dishwasher floor as shown in Figure 30 and flush it clean by holding it under running water.

To reinstall the filter system:

1. return the fine filter to its installed position.

2. place the large object trap/Cylinder filter assembly into its installed position in the dishwasher floor.

3. turn the ring handle clockwise 1/4 turn until it is locked. the arrow on the ring handle and the arrow on the fine filter should point to each other, as shown by the circle in figure 31.

4. Gently pull the ring handle to ensure that the assembly is locked into place

I hope this is helpful to you!

Please respond to my effort to provide you with the best possible solution by using the "Acceptable Solution" and/or the "Helpful" buttons when the answer has proven to be helpful. Please feel free to submit further info for your question, if a solution was not provided. I appreciate the opportunity to serve you!