Home » Yamaha » Musical Instruments » Yamaha YV-1600A

Yamaha YV-1600A Support Question

Find answers below for this question about Yamaha YV-1600A.
Need a Yamaha YV-1600A manual? We have 1 online manual for this item!

Yamaha Overview Questions Manuals Reviews Videos Research

Question posted by pjf82401 on May 31st, 2017

I Need Help Fixing A Broken Pedal.

Hi! I received this product from a school event, and would appreciate some help fixing the pedal. The pedal bar that would connect to the spring on the dampening bar is detached, and the pedal is useless for the time being. Any advice would be appreciated. Thanks! P.S- Sorry for any wrong terminology for the part names.

I Know the Answer!

I have the same question
Request More Information

Current Answers

Answer #1: Posted by hzplj9 on June 1st, 2017 1:43 PM

This answer was accepted by the poster of the original question.

hzplj9

Member since:
June 25th, 2012

Points: 4,873,510

1,100
points

The user guide explains what the various components make up the unit.

You can download it here:

https://www.manualslib.com/manual/431681/Yamaha-Yv-1600a.html

You can try Yamaha direct for spares here:

http://usa.yamaha.com/products/musical-instruments/percussions/vibraphones/yv1600a/

Other ways are through auction sites for parts.

Hope that helps.

Related Yamaha YV-1600A Manual Pages

Owner's Manual - Page 3

...instrument or cause noise. • Make sure to adjust the wire clip positions after assembly. (YV-3910/3710/3700: P. 17) • Height adjustment of the legs the fixing screws must be protected from time to vibrations. q Maintenance The tone bars...18, YV-2700/2700G/ 1600A/520: P 25) should be performed by the warranty. Also make sure to avoid shocks. nect the AC adapter from time to...

Owner's Manual - Page 4

... Button Starts and stops fan rotation. NOMENCLATURE : YV-3910/3710/3700/2700/2700G/1600A/520 Frame End (Large) Natural Tone Bars Accidental Tone Bars Controller Fan Belt Frame End (Small) Rail No. 1 Resonators (Natural Tone Side) Leg (Large) Pedal Stay Resonators (Accidental Tone Side) Pedal * The illustration shows model YV-3710 Slant Shaft Caster Slide Leg Driver...

Owner's Manual - Page 5

... Stay u Pedal Stay !4 AC Adapter !5 Synchro Belt (Fan Belt): 2 pcs. Vibes Drive Unit: YVM-300 !6 Driver !7 Controller !8 8P DIN Cable 3 CONFIRMATION OF PACKING CONTENTS : YV-3700 The shipping carton of your YV-3700 should contain the parts shown below. Before assembling the instrument, confirm that all parts are included as listed. * In the event that...

Owner's Manual - Page 6

... Controller !7 8P DIN Cable q Natural Tone Bars w Accidental Tone Bars u Rail (1) : Player Side Name Plate ...Pedal Stay 4 !3 AC Adapter !4 Synchro Belt (Fan Belt): 2 pcs. CONFIRMATION OF PACKING CONTENTS : YV-3910/3710 The shipping carton of your YV-3910/3710 should contain the parts shown below. Before assembling the instrument, confirm that all parts are included as listed. * In the event...

Owner's Manual - Page 7

When the instrument is broken down, its compact size makes it easy to either divide or collapse. Loosen q Resonators Both ... a minimum amount of space. CONFIRMATION OF PACKING CONTENTS : YV-3910/3710 s Dividable Parts and Collapsible Parts (YV-3910/3710 only) The YV-3910's/YV-3710's large parts are properly aligned. q Pedal Stay The pedal stay divides into left and right sections. q Rails The...

Owner's Manual - Page 8

... Leg Fixing Bolt 1-1 q YV-3910/3710 : Place the large leg, small leg, pedal stay (and reinforcement stay : YV-3700) so that the slide leg fixing bolts of each part will be tightly seated in a location with sufficient space. Flat surface should be performed by at least 2 persons in one of the slide leg notches. z Connect the...

Owner's Manual - Page 9

... leg as far as it will go (aligning the notch with the fixing bolt) and tighten the fixing bolt securely. * The hole next to the notch serves as in the pedal stay assembly) tighten the fixing bolt securely. 1-5 q YV-3910/3710 : Connect the other ends of the pedal stay with the small leg in the same way.

Owner's Manual - Page 10

... in the same way. Leg (Large) Fixing Bolt Leg (Large) Tighten Pedal Stay Notch Reference Hole Pedal Stay Notch 8 Flat surface should face player side. 1-2 q YV-3700 : Insert the pedal stay with its notch facing up into the upper joint of the large leg and tighten the fixing bolt. 1-4 q YV-3700 : Connect the other ends of both stays...

Owner's Manual - Page 12

ASSEMBLY: YV-3910/3710/3700 c Attach the sustain damper. 3-1 z Turn the fixing bolt (damper arm axle) of the damper arm attachment clockwise to ...Damper Arm Attachment Damper Arm Axle Sustain Damper Arm Turn fixing bolt to retract the axle. 1 2 Damper Arm Axle Fixing Bolt 3 Screw in the attachment hole. c Turn the fixing bolt of the damper arm attachment counterclockwise until the ...

Owner's Manual - Page 14

... holding the center rod while turning the rod connector. ASSEMBLY: YV-3910/3710/3700 3-3 z Loosen the center rod fixing bolts to bump the resonators against the legs etc. sponding resonator... Holders Resonator Holders 12 z Loosen Center Rod Fixing Bolt Rod Connector x Turn (screw on) Lock Nut c Secure Center Rod Knurled Part z Loosen Pedal Rod v Attach the resonators. 4-1 Insert the...

Owner's Manual - Page 15

... other. ASSEMBLY: YV-3910/3710/3700 b Set the tone bars. 5-1 (Refer to keep the sustain damper lowered, and then carefully set the tone bars. Rail (3) Rail (4) Rail Clamp Rail Clamp Rail (1) Rail (2) 5-3 Hold the pedal depressed to the illustration of step 3-3 ) Raise the pedal until the knurled part is fully retracted, and fix the center rod...

Owner's Manual - Page 16

.... Insert mount until it stops Driver Fittings Fixing Bolts Motor Unit Support Fitting Pulley 6-3 Slide the fittings moved in step 6-1 back in the direction of the high sound side. ASSEMBLY: YV-3910/3710/3700 n Attach the driver. 6-1 Loosen the fixing bolts at the bottom of rails (2) and (3) on either side are positioned directly...

Owner's Manual - Page 17

... and tighten the fixing bolt. To connect align the arrow mark ( ) on the plug with these pins and hook the controller onto the pins one side at a time. Controller Screw Arrow...DIN cable*. q YV-3910/3710 Fixing bolt High Sound Side q YV-3700 Controller mounting pins High Sound Side Controller hunger Controller Controller , Connect the driver with the controller. 8-1 Connect the MOTOR IN ...

Owner's Manual - Page 19

...Spring Adjustment The damper effect (its pressing force on the tone bars) and the pedal force can be adjusted as follows: With the pedal released loosen the fixing bolt of the center rod to the desired pedal stroke, and retighten the bolts. Pedal... this position. ASSEMBLY: YV-3910/3710/3700 ⁄0 ADJUSTMENTS 10-1 Pedal Stroke Adjustment Loosen the center rod fixing bolts to adjust the ...

Owner's Manual - Page 22

... instrument, confirm that all parts are included as listed. * In the event that a part is attached to q Main Unit. Vibes Drive Unit: YVM-200/YVM-100 !0 Driver !1 Controller !2 8P DIN Cable * The driver of your YV-2700/2700G/1600A/520 should contain the parts shown below. q Vibes Main Unit y Reinforcement Stay (YV-2700/2700G only) u Pedal...

Owner's Manual - Page 23

... rug or carpet to assemble the instrument on the floor. 3 Screw each slide leg into the screw hole at least 2 persons in the tone bars. 1 Loosen the slide leg fixing bolts of the main unit. (All four slide legs are identical.) Slide Legs Tighten 21 ASSEMBLY : YV-2700/2700G/1600A/520 For safety, assembly should...

Owner's Manual - Page 24

... (aligning the notch with the fixing bolt) and tighten the fixing bolt securely. * The hole next to the notch serves as illustrated. (* YV-1600A/520 is not equipped with a reinforcement stay) Low Sound Side Leg (Large) Reinforcement Stay* Audience Side Pedal Pedal Stay Leg (Small) High Sound Side Player Side 5 Connect the large leg and small leg...

Owner's Manual - Page 25

... Side Low Sound Side When a slide leg fixing bolt is tightened in between two notches, there is flush with the upper leg flange. x Connect the center rod with the lock nut. c Tighten the rod connector until it with the sustain damper. ASSEMBLY : YV-2700/2700G/1600A/520 8 Connect the slide legs with upper flange. Align...

Owner's Manual - Page 26

... (see illustration below) to adjust the pulley distance (belt tension). ASSEMBLY : YV-2700/2700G/1600A/520 q For YV-1600A/520 Loosen the center rod fixing bolts to YV-3910/3710/3700 assembly steps n through , on page 12.) 11 Mount the driver and the controller, and connect them using the supplied 8P DIN cable. (Refer to extend the...

Owner's Manual - Page 27

... and tone bars*, and loosen the center rod fixing bolts. (* To remove the tone bars, disengage the springs on page 19.) 25 Always make sure to YV-3910/3710/3700 assembly step 10-1 on page 23.) When a slide leg fixing bolt is... always be performed by at least 2 persons. ASSEMBLY : YV-2700/2700G/1600A/520 13 Adjust the pedal stroke. (Refer to support the instrument by the wooden frame.