Singer 2250 Tradition Support Question
Singer 2250 Tradition Support Question
Find answers below for this question about Singer 2250 Tradition.Need a Singer 2250 Tradition manual? We have 1 online manual for this item!
Question posted by Anonymous-93802 on January 12th, 2013
Please Help
What stitch and tension should i use if I'm trying to sew oilcloth with a singer tradition 2250 sewing machine
Current Answers
Related Singer 2250 Tradition Manual Pages
Instruction Manual - Page 2
... making any other user servicing adjustments mentioned in order to persons: 1. To reduce the risk of lint, dust, and loose cloth. 5. Use this sewing machine. Do not pull or push fabric while stitching. Please turn all controls to the off ("O") when making any adjustments in this
manual. To reduce the risk of the appliance...
Instruction Manual - Page 6
... needle position 38
Zig-zag stitching 40 Blind hem/ Lingerie stitch 42 Sewing on buttons 44 Sew 4-step buttonholes 46 Zippers and piping 48 Mutlti-stitch zig-zag/ Bar tack 50 Free motion darning, stippling 52 Decorative stitches 54 Applique and blindstitch applique 56 Quilting functions 58 Mending 60 Stay-stitching 62 Traditional pintucks 64 Gathering 66 Couching...
Instruction Manual - Page 9
Stitch length dial
10. Reverse sewing lever
10
8. Presser foot
5. Needle plate
6. Bobbin stopper
4
9. Thread cutter
2
9
4. GB Principal parts of the machine
1. Thread take-up lever
1
8
3. Pattern selector dial 5
6
2 Removable extension table/ accessory storage
3
7. Thread tension dial
7
2.
Instruction Manual - Page 13
Oil bottle h. Bobbin (3x) j. Edge/ quilting guide k. they are not supplied with this machine; Overcasting foot o. Satin stitch foot r. All purpose foot b. Button sewing foot e. Pack of needles I. Spool holder
Optional accessories (2) (These 8 accessories are however available as special accessories from your local dealer.) m. Hemmer foot p. Blind hem foot q. ...
Instruction Manual - Page 17
.... Foot control The foot control pedal regulates the sewing speed. (3)
Attention: Consult a qualified electrician if in a polarized outlet only one blade is wider than the other).
To reduce the risk of electric shock, this plug is not in use . a. Unplug power cord when machine is intended to fit in doubt of how to...
Instruction Manual - Page 25
...
9
10
Please Note:
When the bobbin winder spindle is in "bobbin winding" position, the machine will not sew and the hand wheel will not turn. Hold thread end. (7) - Thread bobbin as illustrated ...
- Wind thread counter clockwise around bobbin winder tension discs. (4)
- To start sewing, push the bobbin winder spindle to left (sewing position).
18 GB Winding the bobbin
- Push ...
Instruction Manual - Page 31
...threaded from right to left channel (5). Note: For safety, it is helpful to hold the thread between the spool and thread guide.
- Place ...turn off the spool as by not doing so several sewing problems could result.
1
- Now pass thread behind the thin ...down right channel and up left
1
2
3
4
through pre-tension spring as illustrated. (4)
-
For small thread spools, place small ...
Instruction Manual - Page 33
... about an inch or two. B. Thread tension too loose for straight stitch sewing. Correct thread tension is important to good sewing. - A
B
C
D
Please note: - Thread tension too tight for straight stitch sewing. For all stitch
functions, thread or fabric. - GB Thread tension
Upper thread tension Basic thread tension setting: "4" To increase the tension, turn the dial to the next...
Instruction Manual - Page 37
... bring the thread take up lever to the side of a seam, press down to cut. (3)
30 Pull threads down the reverse sewing lever (A). Release the lever and the machine will sew forwards again. (1)
Removing the work behind the needle and presser foot. (2)
Cutting the thread
Pull the threads under and behind the presser...
Instruction Manual - Page 39
...SINGER 2045 Semi-ball point needle, scarfed. 9 (70) to thread size and weight of fabric. Replace needle often (approximately every other garment ) and/ or at first thread breakage or skipped stitches... fabric, elastic.
NEEDLE, FABRIC SELECTION
NEEDLES
EXPLANATION
SINGER 2020 Standard sharp needles. For best sewing results always use the same thread on natural woven fabrics for best...
Instruction Manual - Page 49
...stitch
For hems, curtains, trousers, skirts, etc. Blind Hem: Turn up the hem to the desired width and press. Fold back (as shown in Fig. 1) against the right side of the fabric with edge of the folded fabric.
1 Start to sew... slowly on the fold, making sure the needle touches slightly the folded top to form a
small scallop.
Tightening the tension slightly will produce a...
Instruction Manual - Page 55
... be attached right or left, depending on " ". Lower the foot and continue to zipper foot.
Change to sew. GB Zippers and piping
Set the machine as illustrated. "4" (according to form a "welt" or piping. (2)
1
2
48 Set stitch length control between "2.5" - Dial selector on which side of cord into the fabric, raise the presser foot...
Instruction Manual - Page 59
... for easier sewing and better results. Stippling: Sew a straight stitch. Using the optional darning foot will help guide you as illustrated. Turn work from behind the needle clamp screw (b). Darning: Install the darning plate. (2)
Remove the presser foot shank. (3) Attach the darning foot to right. A darning hoop is accomplished without the sewing machine internal feed system...
Instruction Manual - Page 65
This foot is an optional accessory not included with your machine. The quilting guide supplied with your machine will help you sew straight, perfectly parallel lines.
58 GB Quilting functions
* The Quilting foot is used to produce perfect 1/4" seams.
Use it to seam squares or patches and for channel quilting.
Instruction Manual - Page 67
Stitch length: Fine (0.5 - 1.0) Sewing Instructions: Position a piece of the tear. GB Mending
Machine Preparation: - Align the center of the foot with the center of fabric directly beneath the tear in your fabric. stitch Zigzag - Pattern: Multi - Stitch width: Largest 4.5mm - Stitch across, backstitching at the start and at the end of the seam.
60
Instruction Manual - Page 69
GB Stay-stitching
Machine Preparation: - Pattern: Straight Stitch - Stitch length: 1.5mm (fine) Sewing Instructions: Stay-stitching is used to reinforce curves such as armholes, seams in stretch fabrics, and other areas to prevent stretching. Stay stitch along the edge of the area 1/4 of an inch from the edge of the seam.
62
Instruction Manual - Page 71
... same direction for each tuck. Press flat.
64 Fold and press wrong sides together on pulled thread line or marked lines. Repeat, sewing in your fabric, either pull a thread to mark the fold or mark with chalk or marking pencil. Stitch 1/8 of an inch from fold line. Pattern: Straight - GB Traditional pintucks
Machine Preparation: -
Instruction Manual - Page 73
... and lower threads to reset your thread ends leaving a minimum 6 inches of stitching. Secure thread ends. Stitch Length: Longest -
Loosen upper tension slightly.
GB Gathering
Machine Preparation: - Once the two rows are completed, draw in your first row of thread. Sewing Instructons: Use this procedure once again at 1/4 of an inch from the edge of the...
Instruction Manual - Page 75
... Couching
Machine Preparation: - As you sew, follow the lines of cord) - Lay the cord under the center opening of your foot and zigzag over a fine cord. Stitch width: Variable (Set according to the right and left of zig-zagging over the cord so that the needle falls just to width of your fabric. Use...
Instruction Manual - Page 79
... and insert correctly. 3. Lint or oil have collected on the thread. Only use good quality sewing machine oil.
4. Remove the upper thread and bobbin case, turn the handwheel backwards and forwards by
the machine.
1. The thread is not attached correctly.
1. Reduce the thread tension. (lower number) 3. The foot is too thick for the needle. 4. Choose...
Similar Questions
Ses2000 Is Bunching Up Stitches When Used For Embroidery
when I am using my SES2000 for embroidery the stitches are all bunching together causing the charact...
when I am using my SES2000 for embroidery the stitches are all bunching together causing the charact...
(Posted by Anonymous-160081 7 years ago)
Thread Questions
The thread is gathering at the bobbin on my singer tradition 2273 what am i doing wrong please.I hav...
The thread is gathering at the bobbin on my singer tradition 2273 what am i doing wrong please.I hav...
(Posted by ianrcox56 8 years ago)
Help! My Machine Seems Jammed But There Is Not Thread Anywhere. What Do I Do?
it runs when I'm on the bobbin setting but when I switch it back is jams again and there's this loud...
it runs when I'm on the bobbin setting but when I switch it back is jams again and there's this loud...
(Posted by Amynalove 9 years ago)
Sewing Elastics Into Lycra
When sewing the elastic int the leotard the zig zag stitch is gather at the back making the stitch l...
When sewing the elastic int the leotard the zig zag stitch is gather at the back making the stitch l...
(Posted by sampennisi 10 years ago)
Something Is Wrong With The Straight Stitch.
My straight stitch seems to have problems even though I did everything I know to fix it. The upper t...
My straight stitch seems to have problems even though I did everything I know to fix it. The upper t...
(Posted by nafangr 10 years ago)