RCA 25255RE2 Support Question
RCA 25255RE2 Support Question
Find answers below for this question about RCA 25255RE2 - ViSYS Cordless Phone Base Station.Need a RCA 25255RE2 manual? We have 1 online manual for this item!
Question posted by Anonymous-149197 on February 14th, 2015
Messages Problem
how can i set the date for messages that i recieved
Current Answers
Answer #1: Posted by BusterDoogen on February 14th, 2015 1:35 PM
BusterDoogen
Member since:
October 30th, 2011 Points: 28,565,407
Member since:
October 30th, 2011 Points: 28,565,407
Date/Time
From the Phone Setting Menu:
1. Press the VOL (- or +) button to scroll to Date/Time .
2. Press SELECT Soft key. The screen displays Year 2009 .
3. Use the touch-tone pad to enter the last two digits of the current year (range: 00 to 99).
4. Press SAVE Soft key to save the year setting and proceed to date setting.
5. The screen displays Date 01/01. Use the touch-tone pad to enter two digits for current
month and day respectively (format: mm / dd).
6. Press SAVE Soft key to save the month/date setting and proceed to time setting.
7. Time 12:00A shows in the display. Use the touch-tone pad to enter four digits for
current time and use Soft key AM/PM to toggle between "P" (pm) and "A" (am).
8. Press SAVE Soft key to save the setting. The screen displays Saved
I hope this is helpful to you!
Please respond to my effort to provide you with the best possible solution by using the "Acceptable Solution" and/or the "Helpful" buttons when the answer has proven to be helpful. Please feel free to submit further info for your question, if a solution was not provided. I appreciate the opportunity to serve you!
Related RCA 25255RE2 Manual Pages
User Guide - Page 5
...
-Reviewing the Redial Numbers
29
-Installing the handset battery
11
-Storing a Redial Record in Directory
29
-Base Station
12-14 -Transferring a call to another extension
30
Programming the Phone -Standby Screen -Programming Functions -Phone Setting -Date/Time -Auto Answer -Auto Answer Intercom -Dial Mode -Area Code
15 15 15 15 16
-Receiving a transferred call from another...
User Guide - Page 7
... Clip
AC power adaptor (for base)
AC power adaptor (for two lines) type modular phone jack, which might look like the one pictured here, installed in your home or office.
Wall plate Modular
telephone line jack
7 Line cords
Handset battery pack
Short Line Cord
Cordless Handset
Telephone Jack Requirements
To use...
User Guide - Page 8
... prevent such interference, the base of a TV, microwave ovens...set channels to properly set , these devices may use the 1.9 GHz frequency for communication include wireless audio/video senders, wireless computer networks, multi-handset cordless telephone systems, and some longrange cordless...other and/or your phone line. Installation
Digital Security System
Your cordless phone uses a digital ...
User Guide - Page 11
...into the power jack on the back of fire or personal injury, use . Place cordless handset in a vertical or floor mount position.
11
CAUTION: To reduce risk of ... position.
6. NOTE: To ensure proper battery installation, the connector is compromised. Installing the Phone
Installing the Handset Battery
NOTE: You must connect the handset battery before use only the Telefield...
User Guide - Page 12
...local telephone products retailer. IMPORTANT: If you are not going to use only the T-2757 (base) power adaptor listed in a vertical or floor mount position. 4. Connect the telephone ...near an electrical outlet and a telephone wall jack (RJ11C), and place your cordless telephone on the wall.
2. Base Station
The phone may want to write down any stored information you do not want erased. ...
User Guide - Page 15
... clock. Press VOL (-
Programming Functions
The system uses a menu structure to give you may press the BACK Soft key (left ) on base to go to menu "Phone Setting- Phone Setting
1. The base displays the current date, time and the Soft keys. NOTE: The Soft keys will automatically exit programming and return to the status of the built...
User Guide - Page 16
... to scroll to On, this function is not in the display. The default
setting is Off. 3. Use the touch-tone pad to enter four digits for base and cordless handset)
If it is set Date/Time. However the Year must still be set to your selection and the screen displays Saved .
16 or +) button to scroll...
User Guide - Page 17
... operate until it is also used for the Dialback feature. From the Phone setting Menu: 1. Use the touch-tone pad to the base. Press the VOL (- Press SELECT Soft key and you may program...Soft key. 3. NOTE: The Dial mode only can be set in the base menu. Press the vol (- Registration (only applicable to handset)
A cordless handset will show PRESS REG TO INITIATE REGISTRATION once the handset...
User Guide - Page 18
... the handset.
18 If the registration is failed (i.e.
During the de-registration process, keep the handset near the base.
Press the SELECT Soft key. or +) button to scroll to your selection. 3. From the Phone Setting Menu: 1. Press SELECT Soft key. De-Register (only applicable for 5 seconds. 4. Press SELECT Soft key. Registration displays to...
User Guide - Page 21
... screen displays Saved. The Ring Volume can be set the answering system On or Off for base)
1. Press SELECT Soft key to save your phone is OFF (not in base: On/Off
Status, OGA Playback, OGA Record, Set OGA, Set Office Time, Ring Delay, Message Length, Call Screening, Message Alert, Remote Password. Ring Volume
There are...
User Guide - Page 25
...Press SAVE Soft key to Restore Setting. 3. Press menu button on handset or MENU Soft key on the base. 2. Press the VOL (- Wait for a dial tone, then dial a phone number. 3. Pick up the handset...) location. Wait for a dial tone then dial the phone number. 3. Making Calls with the Cordless Handset
1. or +) button to scroll to default setting; Default is required for you do not want .
2....
User Guide - Page 26
... serves for both lines are hung up. Making Call in the Speakerphone Mode (from the base)
1. For the cordless handset, press the Talk button.
6.
NOTE: After pick the line, the call timer... Spk button to activate the speakerphone on the base to dial stored phone number.
3. For the base, press the headset button on base and the phone automatically selects first available, if both ...
User Guide - Page 27
...
The telephone number shows in receiver mode. 4. For the base:
1. NOTE: If you have set the Auto Answer as On in the cordless handset, you can answer the call in receiver mode, -OR... Press the DIAL Soft key (on the base only) and then the telephone number will be dialed out. or +) button during a call . With the phone idle, manually enter the telephone number.
Press ...
User Guide - Page 28
...set at individual telephones to the speakerphone, press Spk button. Mute
To have a private, off-line conversation, use the Mute feature. NOTE: When using the mute feature on the base, the indicator will be disabled.
4.
or +) button to cordless... The party on the other end of the line cannot hear you, but the phone will hear a beep to indicate another call is activated. 2.
Use the VOL ...
User Guide - Page 29
...Reviewing the Redial Numbers
Your phone records up the corded handset from the base and the first available line will not be saved in Directory
1. When the phone is shown.
3. NOTE:... SAVE Soft key to three previously dialed phone numbers.
1. NOTE: A name must be input otherwise the record cannot be redialed. Press the Talk button on the cordless handset, or press the Spk button (...
User Guide - Page 30
...use , during the desired mode, press the VOL (+ or -) buttons until the selected handset or base answers the intercom call and have a
conversation and then hang up to finish the transfer or...
to leave a message on hold. 2. Ringer On/Off and Ringer Volume
1. NOTE: If you want to transfer to activate the ringer volume setting. Press XFER Soft key when the phone is transferred back ...
User Guide - Page 33
...button, and then use this unit's Caller ID features, you are on the base and handsets.
The unit can include the phone number, date and time; When the memory is answered or the answering system picks up to... the line icon and handset line Soft key will keep flashing and the base Line LED and handset message LED will stop ringing and go back to either the standard Name/Number Caller ID...
User Guide - Page 43
...new battery pack. product indicates that we are participating in the base or handset charge cradle to collect and recycle the rechargeable battery ... Full
full"
You should erase some messages so the answering system may record new messages. Make sure the telephone is OFF ...when you do not properly charge the phone, battery performance will be released which is set to first use only the...
User Guide - Page 44
...message playback function will be stopped when there is from the base, and the handset is being worked cannot continue.
UNKNOWN
Indicates incoming call is an incoming call or calls which is the end of the phone... a name. EMPTY
Indicates there are no CID records in use your phone. Prompt asking if you set up and use .
BLOCKED
Indicates the person is in memory.
LINE ...
User Guide - Page 46
... is restored to the same jack. Date/Time setting is connected to the base. • You may have too many extension phones on your wiring or local service.
• The handset may be caused by power failure.
Move closer to a working electrical outlet. If no communication between the base and cordless handset
• Unplug the power...
RCA Knowledge Base Results
We have determined that the information below may contain an answer to this question. If you find an answer, please remember to return to this page and add it here using the "I KNOW THE ANSWER!" button above. It's that easy to earn points!-
Multi-Media Operation of Jensen HD5313 Head Unit
... formats other source menu, press the SRC button on TAG Messages, please see the instruction manual of the writing software and... HD5313 Head Unit How do not solve the problem, contact an authorized warranty station near you or contact customer service at 1-800... slot. A list titled "Tagged" will appear in the following settings when compressing audio data in the display. When "DEL TAG"... -
What is the difference between FRS and GMRS radios?
... uses frequencies in discount electronics stores, but these are also listed. Mobile and base station-style radios are available as well, but are higher quality. 845 Portable Audio Products... modulation (FM) instead of their sites are normally commercial UHF radios often used by cordless phones, toys, and baby monitors. Immediate relatives of the GMRS system licensee are typically handheld... -
Connecting the RCA RT2760 Home Theater System
...discontinue use the PHONES jack on the headphones. If you put on the receiver. You may restore factory setting with RF ...stations will damage the speaker. NOTE: Make sure the white wire on the antenna tab to Factory Settings All preset radio stations and surround sound setting...Indoor Antenna Uncoil the antenna wire and locate the base end of speaker wires and terminals match. Once the...
Similar Questions
Cannot Register Handsets On Rca Visys Telephone System 25255
(Posted by kenlamonte 5 months ago)
Phone Reads 'base In Use'
Not Able to receive or make calls from phone. Phone screen reads "Base In Use"
Not Able to receive or make calls from phone. Phone screen reads "Base In Use"
(Posted by kaycoffee1 3 years ago)
Does This Phone Have The Announcement Only Option?
Does this phone have the Announcement Only option?
Does this phone have the Announcement Only option?
(Posted by mybirdkiwi 8 years ago)
Rca Visys Headset Manual
Help I can't get the system to work. It is plugged in with phone and electricity
Help I can't get the system to work. It is plugged in with phone and electricity
(Posted by Lastonkus 9 years ago)
New Cordless Phone
We need to replace a cordless phone, how do we un-register to old one from the base in order to regi...
We need to replace a cordless phone, how do we un-register to old one from the base in order to regi...
(Posted by stacey8371 12 years ago)