Kenmore HE2t Support Question
Kenmore HE2t Support Question
Find answers below for this question about Kenmore HE2t - 3.7 cu. Ft. Front Load Washer.Need a Kenmore HE2t manual? We have 1 online manual for this item!
Question posted by kdreynolds9 on November 4th, 2013
Is There A Reset Button
My dryer tub will not turn when I push the start button. I have power to the dryer and I hear a click when I push and hold the start button. Do you have a reset button to push to help start the dryer?
Current Answers
Related Kenmore HE2t Manual Pages
User Guide - Page 1
CONSUMER SERVICES TECHNICAL
EDUCATION GROUP PRESENTS L-78
FRONT-LOADING AUTOMATIC WASHER
MODELS: WFW8300SW, WFW8500SW, WFW8500SR
JOB AID Part No. 8178558
User Guide - Page 2
... on the installation, operation, and service of the Duet Sport™ Front-Loading Automatic Washer.
ii - For specific information on our products by anyone other than Authorized ...being serviced, refer to properly diagnose malfunctions and repair the Duet Sport™ Front-Loading Automatic Washer.
GOALS AND OBJECTIVES
The goal of this Job Aid is to provide information that will...
User Guide - Page 6
MODEL & SERIAL NUMBER DESIGNATIONS
MODEL NUMBER
MODEL NUMBER
W F W 8 3 00 S W 0
BRAND W = Whirlpool
ACCESS F = Front Loading
PRODUCT W = Washer
SERIES 5 = Whirlpool Leap 7 = 24˝ Front Load 9 = Duet Front Load
6 = Oasis 8 = Mid Line Front Load
PRICE POINT LEVELS (1 - 9)
TRADE PARTNER ID (00 = BRANDED)
YEAR OF INTRODUCTION S = 2006, T = 2007
COLOR CODE T = Biscuit Q = White W = ...
User Guide - Page 8
... Voltage Frequency Amps Water Consumption Average DOE (Gallons-Per-Cycle) Rated Load Load Pounds
Height Install Depth: Min - SPECIFICATIONS
Model Number Model Description
Color
Capacity (Cu.Ft. Max
Width Product Weight (approx)
WFW8300SW
WFW8500SW
WFW8500SR
Front Load Washer
Front Load Washer
Front Load Washer
White with Gray Accents
White with Gray Accents
White with Sterling Bright...
User Guide - Page 9
... fill hoses: 6 ft (1.8 m) Part Number 76314 10 ft (3.0 m) Part Number 350008
A
B
C
D
OPTIONS
Pedestal
You have the option of purchasing pedestals of different heights separately for installation • Open end wrenches 17 mm and 13 mm • Level • Wood block • Ruler or measuring tape
Parts supplied
If You Have Laundry tub or standpipe...
User Guide - Page 10
... purchased your dryer or refer to the "Assistance or Service" section in temperatures below 32°F (0°C).
The washer can cause damage in a basement, laundry room, closet, or recessed area. Proper installation is not recommended.
• A sturdy and solid floor to support the washer with a total weight (water and load) of where the power cord is...
User Guide - Page 11
....3 cm)
1"*** (2.5 cm)
27" (68.6 cm)
1"*** (2.5 cm)
*Min. Closet door with stacked washer and dryer
The dimensions shown, at the top of the right column, are required.
7" (17.8 cm) 7" (17...or confined area
Recommended installation spacing for recessed or closet installation, with vents
Recessed or closet installation Washer on pedestal
3" (7.6 cm)
38" min. (96.5 cm)
1" (2.5 cm)
27" (...
User Guide - Page 14
... washer is loose, move and install washer. These bolts also retain the power cord inside the washer until the bolts are removed, discard the bolts and spacers. Washer
Connect...ft (90 cm) of the hole and completely pull out the bolt, including the plastic spacer covering the bolt.
2.
Attach a hose to the hot water faucet.
Close the bolt holes with an additional two-thirds turn...
User Guide - Page 17
...outlet. Select NORMAL/CASUAL, and then select START. Check to be sure all packaging materials.
5. Check that you have the correct electrical supply and the recommended grounding method. Dispose of your washer, use
1/2 the manufacturer's recommended amount ...water faucets are now installed. Check for a medium sized load. Check the electrical requirements. COMPLETE INSTALLATION
1.
User Guide - Page 19
... water is powerful enough to drive an average clothes load up to three different spin speed choices. You can obtain the same washing results for small and large loads size. ADAPTIVE VARIABLE SPEED MOTOR
The motor adapts to the load size and to the cycle selected to reach high-speed spins. This washer offers up...
User Guide - Page 20
... Dispenser tray is started. The additives will be dispensed into the wash at the beginning of all laundry additives before the washer is easily removed for... high performance cleaning.
SMART DISPENSERS
The three compartments in the detergent advantage system. The bleach release system is included in the dispenser allow loading...
User Guide - Page 21
... for more detailed information. Doing so can completely remove oil.
Please refer to using the washer. WASHER USE
MODEL WFW8300S
MODEL WFW8500S
STARTING THE WASHER
Fire Hazard Never place items in death, explosion, or fire.
Do not store laundry products on it (including cooking oils). Do not dry anything that are dampened with gasoline...
User Guide - Page 22
... bags. For All Wash Cycles
1. Place a load of choosing a cycle, the washer automatically shuts off.
3-4 The door can begin the wash cycle immediately
Select and hold START (for small items.
2. Open the dispenser drawer and add laundry additives to ensure the interior is helpful when you do not select START within 5 minutes of sorted clothes in component...
User Guide - Page 24
... bleach. The washer powers down, the door unlocks, and clothes can be removed. Select PAUSE/CANCEL once.
2. Select the desired OPTIONS.
4. NOTE: If the water level or the temperature is selected. • Liquid detergent: Measure the amount of liquid detergent with the measurement device which comes with the detergent.
Select and hold START (for...
User Guide - Page 25
...temperature, detergent, and clothes load.
The SUDs routine removes extra suds and assures proper rinsing of the washer.
The indicator light for the cycle selected will then power down. Not all Cycles.... Status light turns off.
• Each cycle has a preset cycle time, WASH TEMP, SPIN SPEED, and may have this feature except Rinse/Spin and Drain/Spin. Select and hold START (for PAUSE...
User Guide - Page 28
...washer as soon as in... laundry ...button until the desired setting is helpful when you are removing items from garments.
Cold rinses save energy. This option adds tumbling time prior to remove. Auto Temp Control
ATC (Auto Temp Control) electronically senses and maintains a uniform water temperature. The ATC is automatically turned ON when a cycle is a preset setting for loads...
User Guide - Page 33
... follow these instructions can result in washer or reconnect power. Failure to .
Electrical Shock Hazard Plug into a grounded 3 prong outlet. Noise and vibration may be tightened against the washer cabinet. Re-select cycle and press START. This happens during the wash and rinse cycles.
You will hear sounds that you may hear metal items touching the...
User Guide - Page 35
... hold START, for 1 second?
The top of last cycle? When excessive suds are removed.
Do not use an extension cord. Wash smaller loads.
• Is the washer ...reset the circuit breaker.
• Are both the hot and cold water faucets turned on the water.
• Is the water inlet hose kinked? Reinstall hoses, turn on washer? The hose needs an air gap. WASHER OPERATION
WASHER...
User Guide - Page 81
... . LOAD INSIDE DRUM DURING CLEANING WASHER CYCLE
If at the MCU is locked. 1.
Possible Causes/Procedure Door not opened for operations of the drive motor.
7.
Unplug washer or disconnect power.
2. Door switch/lock unit failure.
1.
Check mechanical linkage from drum and start of the dispenser. 3. If the condition continues four times, the F31 code will reset...
User Guide - Page 83
... of error codes. Select any more failure codes all console LED lights will turn on for 5 seconds.
4.
This executes the automatic test but does not show the error history.
• Close the door.
• Push POWER.
• Select the CLEAN WASHER cycle.
• Press EXTRA RINSE four times within 5 seconds.
• Press EXTRA RINSE...
Similar Questions
Question About Stacking My Washer And Dryer
Can I stack my Kenmore 40311 washer and dryer and what kit do I need?
Can I stack my Kenmore 40311 washer and dryer and what kit do I need?
(Posted by skkocsis 2 years ago)
What Is The Purpose Of Running A Diagnostic Test On Kenmore Front Load Washer
(Posted by dabawa 10 years ago)
Kenmore He2t Front Loading Washer Model# 110.4756
When I turn power on the front panel lights up, but when I push start it all shuts down. Tried unplu...
When I turn power on the front panel lights up, but when I push start it all shuts down. Tried unplu...
(Posted by cpcalder 11 years ago)
Why Front Load Washer 4044 Won't Start The Cycle?
Yesterday while my front load washer 4044 was starting to do its first normal cycle , which usually ...
Yesterday while my front load washer 4044 was starting to do its first normal cycle , which usually ...
(Posted by martinezmarly 11 years ago)
Does This Front Load Washer Need To Have Bolts Installed To Move From Another St
model#110.47571602 HE2t frontload washer locking bolts for moving?
model#110.47571602 HE2t frontload washer locking bolts for moving?
(Posted by donnasilver 12 years ago)