Humax IR-FREE Support Question
Humax IR-FREE Support Question
Find answers below for this question about Humax IR-FREE.Need a Humax IR-FREE manual? We have 1 online manual for this item!
Question posted by mkaliouby on April 17th, 2015
Problem With My Satellite Receiver
my humax ir free (ir.deto) when I switched off the power it gave continuous system initializing screen with the sand hour and doesn't want to start working
Current Answers
Answer #1: Posted by hzplj9 on April 21st, 2015 12:55 PM
hzplj9
Member since:
June 25th, 2012 Points: 4,873,510
Member since:
June 25th, 2012 Points: 4,873,510
There is a common issue with the power supplies in the Humax receivers. It is the capacitors on the power supply that need replacing for new ones. That is not a conclusive answer only what you have put in your question. You should seek the advice of an engineer to investigate for you. Unless you have the skills to solder.
Related Humax IR-FREE Manual Pages
User Manual - Page 2
... used or translated in part or whole without notice.
**
Copyright (Copyright © 2009 HUMAX Corporation)
Not to be able to misuse of the information contained in this user's manual is...trademark of Irdeto Access B.V. Keep this manual.
**
Trademarks
Irdeto is subject to change without HUMAX's prior consent in writing except approval of ownership of copyright and copyright law.
**
Warranty
...
User Manual - Page 3
...with other apparatus.
• Note Indicates additional information to make the user aware of possible problems and information of any importance to help understand, use, and maintain the installation.
**
Meaning... to qualified service personnel.
Refer servicing to promote the sustainable reuse of its working life.
Please separate this item for details of where and how they can ...
User Manual - Page 4
... system earth for the satellite dish. MAINS SUPPLY 90-250V AC 50/60Hz • Operate this may be exposed to liquid of the product.
6. If you start any unsupported attachments as ... or installation procedures.
2. CONNECTION TO THE SATELLITE DISH LNB • Disconnect the product from the mains before you are not sure of the type of power supply indicated on the apparatus.
4. Failure...
User Manual - Page 5
... antenna during a thunderstorm or when left unattended and unused for long periods of time. This will prevent damage to the unit due to lightning and power-surges.
12.EXTRANEOUS OBJECTS • Do not insert anything through the openings in additional damage to the unit. 10.LOCATION • Place the product indoors...
User Manual - Page 13
... antenna or cable.
**
7. RF IN Connects to update software.
**
4. VIDEO Connects to the TV or VCR using an RCA cable.
**
5. POWER CORD Connects to change without notice. LNB IN Connects a satellite antenna cable.
**
2. LNB OUT Connects another digital satellite receiver.
**
3. RF OUT Connects to the RF IN of the product is subject to the...
User Manual - Page 14
....
**
2. ARROW BUTTONS
**
Changes the channel or moves the cursor up, down left or right.
**
10.EXIT
**
Exits all On-Screen Display (OSD) screen.
**
11.HEPG
**
Switches between Humax EPG and Standard EPG.(Not available in IR-ACE II UBI)
**
12.VOL+/VOL-
**
Adjusts the audio volume.
**
13.TEXT
**
Currently not supported.
**
14.?
**
Currently not supported...
User Manual - Page 17
.... You can configure the setting in IR-ACE II UBI Warning: Please note that once you perform Humax Auto Search, all data such as antenna
setting information, channel list and Smartcard information you select Motorised dish, channel search will be skipped. Satellite search will operate automatically. **
When powering on your product for the first...
User Manual - Page 18
After all setting is complete, you can set an option. Press the OK button to receive accurate TV
guide information. Note: Set the current time to complete the installation wizard. You can view the result screen.
Select Current Time/Time Offset/Daylight-Saving Time and set the current time.
User Manual - Page 19
...channels by Humax EPG in favourite channel list.
• Humax EPG: ...8226; FTA : The list of channels classified by free to air in favourite channel list.
• CAS IR : TThe list of channels classified by CAS Irdeto...be switched between TV and radio channel list. Bouquet (YELLOW) The lists of channels classified by bouquets
Satellite (BLUE)
The lists of channels classified by satellites
...
User Manual - Page 20
...
channel, a pop-up will appear. Skip
To skip a channel, select Skip and press the
button. Press the MENU button while the channel list is 8272. (IR-ACE II UBI only)
• If you have forgotten your PIN-Code, please contact your PIN-Code will appear. Delete
**
To delete a channel, select Delete...
User Manual - Page 22
... again to switch to the standard EPG.
**
• All features are similar to make new reservations. You can view the programme information of the reserved programme. • Press the RED button to delete the programme. • Press the GREEN button to those of TV guide changes in IR-ACE II UBI.
Humax EPG...
User Manual - Page 23
... MENU button. 2. Enter the PIN-Code using the NUMERIC(0-9) buttons.
**
Tip: • The default PIN-Code is 0000. • The default PIN-Code is 1234. (IR-ACE II UBI only) • If you have forgotten your PIN-Code, please contact your previous PIN-Code.
**
1.
User Manual - Page 24
...of the i-plate when switching services and set the Wakeup time and Sleep time, the product is 8272. (IR-ACE II UBI only) • If you set OSD skin, screen saver and waiting time. ... turn the product on and off automatically. **
You can adjust the audio output, match the screen ratio to your local product distributor.
**
1. A/V Output Setting You can configure the installation setting...
User Manual - Page 25
... the channel name is complete, press the YELLOW button. 1. To watch locked channels, you want and press the OK button.
**
Organising Satellite
You can delete a satellite. Select Installation and press the OK button.
3.
Enter the name on the keyboard screen. Select Organising Channels and press the OK button.
Rename
**
Press the WHITE button to...
User Manual - Page 26
... automatically search satellites and channels without entering any other information.
Humax Auto Search
You can search SMATV automatically or manually.
**
Note: Humax Auto Search is not available in antenna setting to search services.
**
1. Fixed Antenna You can set antenna and LNB information to search services
Motor Antenna
**
Set Motorised System in IR-ACE II...
User Manual - Page 27
...You can check the information of signal strength and quality.
**
Humax SW Update
You can restore the product to enter your PIN-Code...the MENU button. 2. When completing the software update, the product is automatically powered off and again.
**
Note:
**
To perform software update, you will ...
You can receive mail sent by the broadcasting company.
**
You can update software automatically or ...
User Manual - Page 28
... The equipment must be received). If the power is off during software ...Humax website to -date software. The software update via a designated satellite. 3. Update software when the signal strength and quality is not favorable,
and the signal strength and quality are not recommendable, perform the software update later. Caution: • It may not be careful to keep the power on and the power...
User Manual - Page 30
... poor.
The signal level may temporarily be accepted as this will not switch on.) • Check the main power cable and make sure it is running.
3. No message displayed on the front panel. (The product will increase the signal levels received. • Replace the LNB with a lower noise factor in cases where the...
User Manual - Page 31
...levels of your network operator for Channel List and Installation. (IR-ACE II UBI only)
8. Reinsert the Smartcard and make reservations...is switched on mute. • Check audio type or soundtrack option in the AV menu.
5. Cannot make sure it initializes ...control should point directly towards the receiving part of the reservation.
7. Channel search does not work. • Make sure that...
User Manual - Page 32
... that it is currently on your Smartcard retailer or channel broadcaster for new transponder details.
Satellite dish is too weak. Set the antenna correctly.
and check for a Smartcard replacement. Insert the appropriate Smartcard for data broadcasting.
Problem with the appropriate model that the channel has audio options.
Reinsert Smartcard;
Press the audio...
Similar Questions
Need To Do Sw Update For Humax Satellite Receiver Ir-hd1000
My Receiver is Humax IR-HD1000SW ver. MHZZSIR 1.00.05 (this is the working SW).I need to update to t...
My Receiver is Humax IR-HD1000SW ver. MHZZSIR 1.00.05 (this is the working SW).I need to update to t...
(Posted by YasirAbuelhassan 4 years ago)
Humax Stop Working
i had my humax ir free since three years ago and was doing great until yesterday morning, suddenly i...
i had my humax ir free since three years ago and was doing great until yesterday morning, suddenly i...
(Posted by ghosnt 10 years ago)
Ir-ace11 Receiver Boot
Problem
when connect my humax ir-ace receiver long time boot
when connect my humax ir-ace receiver long time boot
(Posted by thampi 10 years ago)
Update The Software Of Humax Receiver Ir-dh1000 Manually
WHAT IS THE FREQUANCY TO UPDATE THE SOFTWARE OF HUMAX RECEIVER IR-DH1000 MANUALLY?
WHAT IS THE FREQUANCY TO UPDATE THE SOFTWARE OF HUMAX RECEIVER IR-DH1000 MANUALLY?
(Posted by akhdair 12 years ago)