Honeywell RTH2310B Support Question
Honeywell RTH2310B Support Question
Find answers below for this question about Honeywell RTH2310B.Need a Honeywell RTH2310B manual? We have 1 online manual for this item!
Question posted by gajjayjay on August 4th, 2014
How To Change The Batteries In A Honeywell Rth2310b Programmable Thermostat
The person who posted this question about this Honeywell product did not include a detailed explanation. Please use the "Request More Information" button to the right if more details would help you to answer this question.
Current Answers
Related Honeywell RTH2310B Manual Pages
Owner's Manual - Page 1
Quick Installation Guide
RTH2310
Programmable Thermostat 69-2214EF-04
Owner's Manual - Page 2
... the simple step-by-step instructions in the following pages.
1) Identify your system type. 2) Remove your old thermostat. 3) Identify the wires. 4) Mount the new wallplate. 5) Connect the wires. 6) If the wire labels don't match. 7) Specify the furnace type. 8) Install the batteries. 9) Install the thermostat. 10) Set the system. We are here to help.
Owner's Manual - Page 3
RTH2310 Programmable Thermostat
1 Identify System Type
1.
This thermostat is not compatible with or without pump • a millivolt system • a central heating and cooling system
If you are not sure of your system type or if you have any other questions, call us toll-free at 1-800-468-1502. This thermostat is compatible with the following...
Owner's Manual - Page 4
... NOTICE: Do not put your local waste management authority for instructions regarding recycling and proper disposal.
3 Contact your old thermostat in the trash if it contains mercury in a sealed tube.
Quick Installation Guide
2 Remove Old Thermostat
2.
1) Turn power off at the heating/cooling system.
2) Remove old thermostat, but leave wallplate with wires attached.
Owner's Manual - Page 5
... wires and remove the old wallplate only after all wires are attached to a terminal marked C or C1, they will not be connected to your new thermostat.
RTH2310 Programmable Thermostat
3 Identify Wires
3. Wrap the wires around a pencil to identify wires. Do not use non-connected wires.
If any wires are not attached to your...
Owner's Manual - Page 6
Pass wires through opening of wallplate and secure wallplate to the wall using provided screws.
5 Insert plastic anchors. Quick Installation Guide
4 Mount New Wallplate
4.
1) Remove coverplate.
2) Loosen screw (the screw remains captive on wallplate).
3) Remove thermostat.
4) Mark and drill appropriate mounting holes (or use existing holes).
Owner's Manual - Page 7
... with the terminal having the same letter.
2) Loosen the terminal screws using a screwdriver, insert the wires, then tighten the screws.
3) Push any terminal on the thermostat, see next page.
6 RTH2310 Programmable Thermostat
5 Connect Wires (typical wiring) 5.
Owner's Manual - Page 9
J2 jumper
HG Leave the jumper in this position if you have connected a wire to the G terminal.
HE Place the jumper to this factory-set position if you have an electric furnace.
8
RTH2310 Programmable Thermostat
7 Specify Furnace Type
6. Set the Jumper J2, on the back of the thermostat, if you have a gas or oil furnace.
Owner's Manual - Page 10
You will display the ambient temperature once it is installed on the wall. After the batteries are holding the thermostat. The thermostat will hear a clicking
sound. Afterwards, the screen displays the actual temperature. By default, the setpoint is normal that the displayed temperature be higher than the ...
Owner's Manual - Page 11
RTH2310 Programmable Thermostat
9 Install thermostat
8.
1) Mount the thermostat on the wallplate.
2) Tighten the screw and install the coverplate.
3) Turn power back on at the heating/cooling system.
10
Owner's Manual - Page 12
... min (alternate setting for 3 seconds to enter or exit the setup menu.
2) To advance to the next function, briefly press both and buttons simultaneously.
3) To change the setting, press the or button. DISPLAY
DESCRIPTION
OPTIONS 1
Temperature display
°C or °F
Time display
12 h or 24 h
Early Start 2
On or Off
Heating...
Owner's Manual - Page 13
Guide d'installation rapide
RTH2310
Thermostat programmable 69-2214EF-04
Similar Questions
How To Change Battery In Honeywell Thermostat Th4110d1007
(Posted by jasnFa 10 years ago)
How To Change Batteries In Honeywell Thermostat Manual Th3110d1008
(Posted by bubbsim 10 years ago)
How To Change Battery In Honeywell Thermostat Manual Rth2310b
(Posted by colojw 10 years ago)
How To Remove Cover Of Honeywell Rth2310b 5-2 Day Programmable Thermostat
(Posted by richamille 10 years ago)