Honeywell RTH2310B Support Question
Honeywell RTH2310B Support Question
Find answers below for this question about Honeywell RTH2310B.Need a Honeywell RTH2310B manual? We have 1 online manual for this item!
Question posted by blactane on April 24th, 2014
How To Change Batteries On Thermostat Rth2310b
The person who posted this question about this Honeywell product did not include a detailed explanation. Please use the "Request More Information" button to the right if more details would help you to answer this question.
Current Answers
Related Honeywell RTH2310B Manual Pages
Owner's Manual - Page 1
Quick Installation Guide
RTH2310
Programmable Thermostat 69-2214EF-04
Owner's Manual - Page 2
...-step instructions in the following pages.
1) Identify your system type. 2) Remove your old thermostat. 3) Identify the wires. 4) Mount the new wallplate. 5) Connect the wires. 6) If the wire labels don't match. 7) Specify the furnace type. 8) Install the batteries. 9) Install the thermostat. 10) Set the system. Do you need assistance? We are here to help...
Owner's Manual - Page 3
...
If you are not sure of your system type or if you have any other questions, call us toll-free at 1-800-468-1502.
This thermostat is compatible with the following systems:
• Gas, oil or electric furnace • Central air conditioner • a hot water system with heat pumps or multi...
Owner's Manual - Page 4
Do not remove wallplate yet. Contact your old thermostat in the trash if it contains mercury in a sealed tube.
Quick Installation Guide
2 Remove Old Thermostat
2.
1) Turn power off at the heating/cooling system.
2) Remove old thermostat, but leave wallplate with wires attached.
MERCURY NOTICE: Do not put your local waste management authority for instructions...
Owner's Manual - Page 5
... wires and remove the old wallplate only after all wires are attached to a terminal marked C or C1, they will not be connected to your new thermostat.
IGNORE WIRE COLORS: Use terminal screw designations to prevent them from falling though the wall opening.
4 Do not use C or C1 wires
Identify and label...
Owner's Manual - Page 6
Quick Installation Guide
4 Mount New Wallplate
4.
1) Remove coverplate.
2) Loosen screw (the screw remains captive on wallplate).
3) Remove thermostat.
4) Mark and drill appropriate mounting holes (or use existing holes). Pass wires through opening of wallplate and secure wallplate to the wall using provided screws.
5 Insert plastic anchors.
Owner's Manual - Page 7
RTH2310 Programmable Thermostat
5 Connect Wires (typical wiring) 5.
If a wire does not match any excess wire back into the wall opening.
Labels don't match? Remove jumper if you have ... with the terminal having the same letter.
2) Loosen the terminal screws using a screwdriver, insert the wires, then tighten the screws.
3) Push any terminal on the thermostat, see next page.
6
Owner's Manual - Page 9
Set the Jumper J2, on the back of the thermostat, if you have an electric furnace.
8 HE Place the jumper to this factory-set position if you have connected a wire to the G terminal. RTH2310 Programmable Thermostat
7 Specify Furnace Type
6.
J2 jumper
HG Leave the jumper in this position if you have a gas or oil furnace.
Owner's Manual - Page 10
... once it is installed on the wall. Afterwards, the screen displays the actual temperature. After the batteries are holding the thermostat. It is 70 °F (21 °C).
9 The thermostat will hear a clicking
sound. Observe the
polarity. 3) Reinstall the battery cover. Quick Installation Guide
8 Install Batteries
7.
1) Pull out the battery cover. 2) Install the batteries as shown.
Owner's Manual - Page 11
RTH2310 Programmable Thermostat
9 Install thermostat
8.
1) Mount the thermostat on the wallplate.
2) Tighten the screw and install the coverplate.
3) Turn power back on at the heating/cooling system.
10
Owner's Manual - Page 12
... Printed in bold and underlined.
2 See page 3 of Operating Manual.
3 Use the system switch to the next function, briefly press both and buttons simultaneously.
3) To change the setting, press the or button. DISPLAY
DESCRIPTION
OPTIONS 1
Temperature display
°C or °F
Time display
12 h or 24 h
Early Start 2
On or Off
Heating...
Owner's Manual - Page 13
Guide d'installation rapide
RTH2310
Thermostat programmable 69-2214EF-04
Similar Questions
Honeywell Programmable Thermostat - Rth2310b How To Change Battery
(Posted by wowChloe8 10 years ago)
How To Change Honeywell Thermostat Rth2310b Manual From C To F
(Posted by admgraf 10 years ago)
How To Change Battery In Honeywell Thermostat Manual Rth2310b
(Posted by colojw 10 years ago)