Garmin echo 500c Support Question
Garmin echo 500c Support Question
Find answers below for this question about Garmin echo 500c.Need a Garmin echo 500c manual? We have 3 online manuals for this item!
Question posted by estrada2000 on July 18th, 2011
Power To Screen
wont power on, but does have power to the device. any advice?
Current Answers
Related Garmin echo 500c Manual Pages
Installation Instructions - Page 1
... separately).
About the echo Mount The echo device can be mounted flush with your echo 100/150/200/300c/500c /550c. Place a...socket • Masking tape • Number 2 Phillips screwdriver • Marine sealant • Hardware for in clean (non-turbulent) water for product ... that creates air bubbles or causes the water to power. With the supplied hardware, you already have any part...
Installation Instructions - Page 4
...power cable from the swivel mount to the desired positions when
➋
the cables are connected.
6. Fastening the Swivel Mount without the Cables Installed in the upward position, place the echo
100/150/300c device ➋ or the echo 200/500c...3. Fastening the Swivel Mount with marine
➋
sealant.
➎
➊
Installing the echo Device in the Swivel Mount 1. Place ...
Installation Instructions - Page 6
...169; 2011 Garmin Ltd. Specifications
Specification Device
Size
echo 100/150/300c
echo 200/500c/550c
Weight (without bail mount)
Weight (with bail mount)
Display
echo 100/150/300c echo 200 echo 500c echo 550c echo 100/150/300c echo 200 echo 500c echo 550c echo 100/150
echo 200
echo 300c echo 500c
echo 550c
Case
echo 100/150/200/300c/ 500c/550c
Measurement
W × H × D: 4.1 ×...
Owner's Manual - Page 4
... 5 Split Frequency Page 5 Log Pages 6
ii
Flasher Page 8 Opening the Numbers Page 8 Using the echo 9 Sonar Screen Settings 9 Alarms 13 Sonar Numbers 15 Calibration 16 Appendix 18 Specifications 18 Cleaning the Outer Casing 18 Cleaning the Screen 18 System Settings 18 Software License Agreement 19 Index 20
echo 200, echo 300c, echo 500c, and echo 550c Owner's Manual
Owner's Manual - Page 5
... can set the device to turn on when power is applied. Follow the on the echo 200, echo 500c, and echo 550c. From any page, select MENU > Setup > System > Auto Power > On. Select and to enter the initial device settings.
2. Selects page options (page 4) on -screen instructions.
The echo 300c, echo 500c, and echo 550c have color displays. The device prompts you must also...
Owner's Manual - Page 6
... MENU > Setup > System > Color Mode. 2. Setting the Color Mode
For the echo 300c, the echo 500c, and the echo 550c, you can select the color scheme displayed on a sonar screen. Select ENTER. For the echo 300c, the echo 500c, and the echo 550c, you can set when the device makes audible sounds.
1. Color Scheme Color
Description
White
Yellow
Strong return...
Owner's Manual - Page 7
echo 200, echo 300c, echo 500c, and echo 550c Owner's Manual
Getting Started 3 After adjusting a setting and returning to a page, you must open for 15 seconds and no keys are selected, the menu closes and your previous screen is open the Full Screen page (page 4), the Split Zoom page (page 5), the Split Frequency page (page 5), or the Flasher...
Owner's Manual - Page 8
...; Flasher page (page 8) • Numbers page (page 8)
Selecting a Page
1.
Full Screen Page
The Full Screen page shows a full-view graph of sonar readings from any page to left.
4
echo 200, echo 300c, echo 500c, and echo 550c Owner's Manual TIP: When using the echo 200, the echo 500c, or the echo 550c, select or
from a transducer. From any page, select MENU...
Owner's Manual - Page 9
... a full-view graph of sonar readings on the right side of the screen, and a magnified portion of that graph on the left side of the screen shows 77 kHz frequency sonar data, and the right side of the screen.
echo 200, echo 300c, echo 500c, and echo 550c Owner's Manual
5
Split Frequency Page
On the Split Frequency page...
Owner's Manual - Page 10
...-range scale on the depth log. Select a depth-range scale. echo 200, echo 300c, echo 500c, and echo 550c Owner's Manual From any page, select MENU > Pages > Log. 2. You can also view both ). The duration appears in depth. If the temperature log or the split screen log is shown (depth, water temperature, or both logs simultaneously...
Owner's Manual - Page 11
... the variation. Increasing the temperature-range scale allows you must open the temperature log (page 7) or the split screen log (page 7). Viewing the Depth Log and the Temperature Log Simultaneously.
Select a duration.
echo 200, echo 300c, echo 500c, and echo 550c Owner's Manual
7 Select MENU > Temp.
Log Options > Scale.
2. If the temperature log or the split...
Owner's Manual - Page 13
... zoomed window) and selecting a fixed starting depth of 5 meters, the device will display an area from the bottom of the depth scale that will display...Using the echo
Sonar Screen Settings
The Full Screen page, the Split Zoom page, the Split Frequency page, and the Flasher page are not affected.
1. Select Menu > Zoom > Manual Zoom > Span.
2. echo 200, echo 300c, echo 500c, and echo 550c Owner...
Owner's Manual - Page 14
... the Split Frequency page by selecting the span and locking the screen to the bottom of 20 meters, the device will display an area from the bottom is displayed on one ...the Sonar Screen After pausing the screen or viewing the sonar history, select MENU > Resume Sonar.
10
echo 200, echo 300c, echo 500c, and echo 550c Owner's Manual Select a span. When you must open the Full Screen page (page...
Owner's Manual - Page 15
... on one page, that setting is also displayed on the other pages.
1. The depth of the screen. echo 200, echo 300c, echo 500c, and echo 550c Owner's Manual
11 When you show the depth line, you must open the Full Screen page (page 4), the Split Zoom page (page 5), or the Split Frequency page (page 5).
Select MENU > Pause...
Owner's Manual - Page 16
...10123;
➊ A-Scope ➋ Diameter of Suspended Targets Before you must open the Full Screen page (page 4), the Split Zoom page (page 5), or the Flasher page (page 8).
...echo 200, echo 300c, echo 500c, and echo 550c Owner's Manual The 200 kHz frequency shows better detail, has a narrower beam, and is applied to the other pages.
1.
When you must open the Full Screen...
Owner's Manual - Page 17
... large fish only.
• Select to accept the value. Select ENTER to accept the value. echo 200, echo 300c, echo 500c, and echo 550c Owner's Manual
Using the echo
2. Select ENTER to accept the value.
NOTE: Alarm settings are saved when the device is turned off .
1. From any page, select MENU > Setup > Alarms > Water Temperature > On.
2. Select...
Owner's Manual - Page 18
...screen with normal sensitivity, select Auto-Med. • To display the sonar screen with lower sensitivity and less noise,
select Auto-Low.
14
echo 200, echo 300c, echo 500c, and echo...the screen is ...screen, then slightly decrease the gain.
To set the 77 kHz and the 200 kHz screens separately.
1.
NOTE: To set the gain on a sonar screen... of the screen. 3. When... the Full Screen page (page...
Owner's Manual - Page 19
.... NOTE: The device must open the Full Screen page (page 4), the Split Zoom page (page 5), or the Split Frequency page (page 5). Showing the Water Speed Before you can show the water temperature, you must set whether the sonar returns near the surface of those numbers. Select Auto.
echo 200, echo 300c, echo 500c, and echo 550c Owner...
Owner's Manual - Page 21
... actually is known to enter the top speed as measured by an external source, such as a GPS. (Do not enter the Water Speed value displayed on -screen instructions.
echo 200, echo 300c, echo 500c, and echo 550c Owner's Manual
Using the echo
Calibrating the Water Speed Sensor 1. This is .
4. Measure the water temperature using the temperature-capable transducer...
Owner's Manual - Page 22
..., select MENU > Setup > Units > Language. 2. Select the language.
18
echo 200, echo 300c, echo 500c, and echo 550c Owner's Manual Gently wipe the screen with a mild detergent solution.
2. Clean the outer casing (not the screen) of 15 and 45 degrees at 3dB. System Settings
Setting the Language 1. The device is coated with a special anti-reflective coating which is...
Similar Questions
How Do I Go Into Simulation Mode On A Garmin Marine Gps Modle741xs
how do I use simulation mode on a garmin 741xs marine ver
how do I use simulation mode on a garmin 741xs marine ver
(Posted by Curthupp 6 years ago)
Just Installed My New Garmin Echo 500c. When Turned On Just Gets Green Screen.
(Posted by bjandcliff 12 years ago)