Craftsman 28126 Support Question
Craftsman 28126 Support Question
Find answers below for this question about Craftsman 28126 - 3/8 in. Pro Rear Handle Drill.Need a Craftsman 28126 manual? We have 1 online manual for this item!
Question posted by joynjershore on May 8th, 2022
Removal Of Chuck
I am trying to remove the old chuck to replace it. I removed the screw inside the chuck. I put an allen wrench in the chuck and hit with a mallet (CCW direction). Since this drill has no locking feature, when I hit the allen wrench with the mallet (per instructions in the manual), the drill just turns and the chuck does not loosen. Do you have suggestions on what else to do to remove the chuck? Thanks, Jerry
Current Answers
Answer #1: Posted by SonuKumar on May 8th, 2022 9:36 PM
SonuKumar
Member since:
May 9th, 2021 Points: 16,617,810
Member since:
May 9th, 2021 Points: 16,617,810
https://www.youtube.com/watch?v=u4hLI4uBNKc
https://www.youtube.com/watch?v=22KyvRkjmIc
How do you remove a chuck from a Craftsman drill?
Insert the Allen wrench into the drill chuck again and tighten the chuck jaws around the Allen wrench. Turn the chuck counterclockwise by tapping the Allen wrench with a hammer. Once the chuck is loose, remove the Allen wrench and twist the chuck off by hand.
Please respond to my effort to provide you with the best possible solution by using the "Acceptable Solution" and/or the "Helpful" buttons when the answer has proven to be helpful.
Regards,
Sonu
Your search handyman for all e-support needs!!
Related Craftsman 28126 Manual Pages
Operation Manual - Page 1
PROFESSIONAL REAR HANDLE DRILL VARIABLE SPEED/REVERSIBLE DOUBLE INSULATED Model No. 315.281260
_11_ WARNING: To reduce the risk of injury, the user must read and understand the operator's ...
Operation Manual - Page 2
...; Specific Safety Rules ...
4
• Symbols ...
5-6
• E)ectricai ...
7
• Features ...
8-9
• Assembly ...• Operation ...• Maintenance ...• Accessories ...
9 10-13 ...OUTLET IN THE UNITED STATES FOR FREE REPLACEMENT,
This warranty gives you specific legal rights... Estates, IL 60179
This product has many features for making it easy to give complete satisfaction...
Operation Manual - Page 3
... measures reduce the risk of drugs, alcohol or medication. If damaged, have the switch on invites accidents.
[] Remove any adjusting key or wrench before making any other condition that cannot be controlled with the power tool or these devices can be drawn into account the working conditions and the work to control.
[] Use...
Operation Manual - Page 4
...[] Inspect for and remove all nails from lumber before using this type of work with a "live " and shock the operator.
[] Know your power tool. If you do this tool. Some examples of..., sawffqg, grinding, drilling, and other part that is damaged should be properly repaired or replaced by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden wiring...
Operation Manual - Page 5
.... SYMBOL
NAME
DESIGNATION/EXPLANATION
V
Volts
Voltage
A
Amperes
Current
Hz
Hertz
Frequency (cycles per second)
W
Watt
Power
min
Minutes
Time
Alternating Current Direct Current
no
No Load Speed
[]
Class II Tool
Type of current Type or a characteristic of injury or damage, avoid contact with side shields and, as necessary, a full face shield when...
Operation Manual - Page 6
...Indicates a situation that may result in severe eye damage.
Before beginning power tool operation, always wear safety goggles or safety glasses with side shields.
For service... the operator's manual, do not use only identical replacement parts. Thefollowingsignalwordsandmeaningasreintendedto explainthe levelsofriskassociatedwiththisproduct. SYMBOL
SIGNAL
MEANING
_IL
DANGER...
Operation Manual - Page 7
... protecting insulation. Never use . Observe all normal safety precautions to handle the current the product will cause a drop in line voltage, ...replacement parts when servicing. ELECTRICAL CONNECTION
This product has a precision-built electric motor, it will overheat.
Double insulated tools do so can result in overheating and loss of the
working outdoors with "WA" on direct...
Operation Manual - Page 8
PRODUCT SPECIFICATIONS Chuck 3/8 in., Keyless No Load Speed 0-2,500/min (RPM) Switch Variable Speed
Input 120 V, 60 Hz, AC only, 6.5 Amps Power Cord 10 ft.
Net Weight 4.3 Ibs. TOP LEVEL
KEYLESS CHUCK
BELT CLiP
REARLEVEL
DIRECTIONOF ROTATIONSELECTOR (FORWARD/REVERSE)
VARIABLESPEED SWITCHTRIGGER
LIVE TOOL INDICATOR
8
Fig. 1
Operation Manual - Page 9
..., please call 1-800-932-3188 for assistance.
LOCK-ON BUTTON
The lock-on the product and in the packing list are included.
[] Inspect the product carefully to hand-tighten or release the drill bit in .
UNPACKING This product has been shipped completely assembled. [] Carefully remove the product and any parts are replaced.
KNOWYOUR DRILL
See Figure !.
Operation Manual - Page 10
... arrows on the chuck indicate which direction to rotate the chuck body in order to become overheated.
The direction of time.
Running at low speeds under constant usage may cause the drill to LOCK (tighten) or UNLOCK (release) the drill bit. If this is controlled by running the drill at full speed. The drill has a keyless chuck that makes it...
Operation Manual - Page 11
... unplug the tool when installing or removing bits, adjusting settings, or when the tool is slightly larger than the bit size you intend to use a wrench to tighten or loosen the chuck jaws. This could slip and come in figure 5. NOTE: Rotate the chuck body in the direction of the drill to the chuck.
• Tighten the chuck jaws securely...
Operation Manual - Page 12
.... 6
Fig. 7 12
Do not force the drill or apply side pressure to keep it to a power supply. [] Check the direction of rotation selector for extended periods of the handle.
[] Release the switch trigger. [] Release the lock-on position (depress and release the variable speed switch). LOCK-ON BUTTON
DRILLING See Figures 7- 8. Let the tool de the work.
Operation Manual - Page 13
...to grab and kick in the workpiece or if the drill stalls, stop the tool immediately. This will prevent the drill bit from overheating. Remove the bit from slipping off the starting point, increase... much pressure will prolong the life of the bit and increase the drilling action.
[] If the bit jams in the opposite direction and could cause loss of control when breaking through holes, place a...
Operation Manual - Page 14
... sharply with a new one.
[] Unplug the drill.
[] Insert a 5/16 in the chuck for extended work with any other parts should be removed and replaced with a mallet in serious personal injury.
or larger hex key into the chuck of the unit under normal operating conditions. HEXKEY
CHUCK
Fig. 9
[] Open the chuck jaws and remove the hex key. Use clean cloths...
Operation Manual - Page 15
... (For wood or metal) ...[] Masonry Bits ...[] Wood Boring Bits ...[] Hole Saws ...[] Drill Stand [] Doweling Jig
1/2 in serious personal injury.
15 MALLET
CHUCK
TO RETIGHTEN A LOOSE CHUCK The chuck may become loose on the spindle.
[] Open the chuck jaws and remove the hex key.
[] Tighten the chuck screw. Max.
_, WARNING; Do not use any attachments or accessories not recommended by...
Operation Manual - Page 16
SEE BACK PAGE FOR PARTS ORDERING INSTRUCTIONS
SEENOTE
1 4
Key Part No. CRAFTSMAN 3/8 in all correspondence regarding your DRILL or when ordering repair parts. Number
1 6611903 2 690033083 3 940045080 4 940114169
987000063
PARTS LIST
Description Chuck Screw Chuck ...Data Label ...Logo Label ...Operator's Manual (Not shown)
Qty. 1 1 1
1
NOTE:The assembly shown represents an important part...
Similar Questions
Chuck Removal
how do I remove the chuck from my Craftsman model 315. 1010 70?
how do I remove the chuck from my Craftsman model 315. 1010 70?
(Posted by ernestoleos1018 6 years ago)
How To Remove The Chuck From A Craftsman 9 Drill Press
(Posted by v12Ashr 9 years ago)
Replacement Chuck
Where can I purchase a new chuck for this drill?
Where can I purchase a new chuck for this drill?
(Posted by kmurray786 10 years ago)
How To Remove Socket From A Craftsman 943796 Wrench Handle
(Posted by mjlarkin046 12 years ago)
Drill Model315222690 Chuck Replacement?
I want to replace the chuck on my drill.
I want to replace the chuck on my drill.
(Posted by greatwhitewally 12 years ago)