ZyXEL NBG4604 Support Question
ZyXEL NBG4604 Support Question
Find answers below for this question about ZyXEL NBG4604.Need a ZyXEL NBG4604 manual? We have 1 online manual for this item!
Question posted by Xinfuzemodz on February 16th, 2016
[help] Can't Access Admin Settings
I can't access admin settings even after resetting (hold longer than 5 seconds) my user name and password don't reset to admin : 1234 or supervisor doesn't work either please help.
Current Answers
Answer #1: Posted by waelsaidani1 on February 17th, 2016 5:08 AM
waelsaidani1
Member since:
May 12th, 2013 Points: 19,501,797
Member since:
May 12th, 2013 Points: 19,501,797
There are a number of other troubleshooting steps you can take, here is a list: http://www.speedguide.net/faq/i-cant-connect-to-my-routers-admin-interface-58
Related ZyXEL NBG4604 Manual Pages
User Guide - Page 28
...data networks.
By implementing PPPoE directly on the NBG4604 (rather than individual computers), the computers on PPPoE. Table 7 Wizard Step 3: PPPoE Connection
LABEL
DESCRIPTION
ISP Parameter for Internet Access
Connection Type
Select the PPP over Ethernet (PPPoE) functions as dynamic service selection.
User Name
Type the user name given to the appendix for both the subscriber...
User Guide - Page 30
...User Name
Type the user name given to give the NBG4604 an automatically assigned IP address depending on the requirements of the PPTP server.
Type the subnet mask assigned to you a fixed IP address.
Connection ID/ Name
Enter the connection ID or connection name... the User Name and Password fields for a PPP connection and the PPTP parameters for Internet Access
Connection ...
User Guide - Page 37
...Mode screen. The default username is "admin" and password is "supervisor" and password ¡s "supervisor". NBG4604 User's Guide
37 The recommended screen resolution is an HTML-based management interface that you cannot access Remote MGMT screens and can use to the NBG4604: "admin" and "supervisor". The default supervisor user name is "1234". Refer to the Troubleshooting chapter to see...
User Guide - Page 40
... 1 second to restart/reboot the NBG4604. 3 Press the RESET button for longer than five seconds to set the NBG4604 back to
its factory-default configurations.
3.5 Navigating the Web Configurator
The following summarizes how to reload the factory-default configuration file. Chapter 3 The Web Configurator
3.4 Resetting the NBG4604
If you forget your password or IP address, or you cannot access the...
User Guide - Page 45
...access the NBG4604
SNMP
Use this screen to enable UPnP on the NBG4604.
Language
This screen allows you to select the language you to your NBG4604's time and date. UPnP
General
Use this screen to configure through which IP address(es) users can use HTTP to change administrative settings such as system and domain names, password...or reset the factory defaults to reboot the NBG4604 ...
User Guide - Page 53
...reset the factory defaults to your NBG4604. Use this screen to activate syslog logging as well as the syslog server IP address. This screen allows you to configure advanced wireless settings. This screen allows you to select whether your device acts as system and domain names, password... to change administrative settings such as a Router or a Access Point.
NBG4604 User's Guide
53 Chapter...
User Guide - Page 73
... security).
Then, they can use the wireless network, it does not matter if it has the correct settings. If your users.
1. These kinds of an authorized wireless client.
NBG4604 User's Guide
73 In addition, you cannot set up user names and passwords for example, 00A0C5000002 or 00:A0:C5:00:00:02.
You can still see the appropriate...
User Guide - Page 74
...user name and password.
Encryption is not possible to support WPA as well. For example, suppose the AP does not have a RADIUS server.
If users do not log in the wireless network supports. When you should set... the next section.
6.3.1.4 Encryption
Wireless networks can use encryption to set up WPA2-PSK or
74
NBG4604 User's Guide
Note: It is like a secret code.
The types of...
User Guide - Page 91
... be in this screen.
NBG4604 User's Guide
91 The NBG4604 functions as a wireless network bridge and establishes wireless links with other APs. The NBG4604 acts as a bridge and access point simultaneously.
• Bridge - You need to know the MAC address of your NBG4604 wants to make a bridge connection with the Basic Setting set to Disabled, and Security Mode set to No Security by...
User Guide - Page 100
... server information (and the NBG4604's WAN IP address). If you do not configure a DNS server, you must know the IP address of a computer in the field to use . IP Address
Set WAN MAC Address Apply Reset
Select None if you chose UserDefined, but leave the IP address set a second choice to User-Defined, and enter the...
User Guide - Page 102
... Reset to the right.
This value specifies the time in the field to begin configuring this option and enter the MAC address you are cloning.
The MAC address section allows users to Confirm Nailed-Up Connection Idle Timeout
DNS Servers First DNS Server
Second DNS Server
DESCRIPTION
Type the password associated with the user name above...
User Guide - Page 104
...'s IP address in order to configure the WAN port's MAC address by the NBG4604. Chapter 7 WAN
Table 41 Network > WAN > Internet Connection: PPTP Encapsulation
LABEL
DESCRIPTION
Password
Type the password associated with the User Name above. The MAC address section allows users to access it. If you do not want to configure DNS servers.
WAN MAC Address...
User Guide - Page 114
... one of network clients using the NBG4604's DHCP servers.
Click Reset to begin configuring this screen to always assign an IP address to a MAC address (and host name). If you chose User-Defined, but leave the IP address set a second choice to
User-Defined, and enter the same IP address, the second UserDefined changes to None after you...
User Guide - Page 127
... in the Service Provider field.
Reset
Click Reset to the WAN IP address. Chapter 11 Dynamic DNS
Table 50 Network > Dynamic DNS (continued)
LABEL Host Name
User Name Password Token
DESCRIPTION
The host name is the domain name that the DDNS service will map to your changes back to the NBG4604. Type the user name that you can specify up to...
User Guide - Page 131
Reset
Click Reset to start configuring this screen. This screen displays a list of Service (DoS) attacks when the firewall is activated. Figure 79 Firewall > Access Control Rule
NBG4604 User's Guide
131
Figure 78 Security > Firewall > General
The following table describes the labels in this screen again.
12.5 The Access Control Rule Screen
Click Firewall > Access Control Rule ...
User Guide - Page 155
... save your NBG4604's World Wide Web settings, click Management > Remote MGMT to allow the computer with the NBG4604 using this service. NBG4604 User's Guide
155 Select All to display the WWW screen.
Figure 90 Management > Remote MGMT > WWW
The following table describes the labels in order to use that is allowed to access the NBG4604 using this...
User Guide - Page 156
... you must use the same port number in this service.
Apply Reset
Choose Selected to just allow the computer with the NBG4604 using this screen.
Select the interface(s) through which IP address the access can come. Click Apply to save your customized settings and exit this service. Specify which interfaces allow any computer to...
User Guide - Page 157
... Address
DESCRIPTION
You may access the NBG4604 using this service. Apply Reset
Choose Selected to just allow any computer to specify which interfaces allow FTP access and from which IP address the access can come. Your NBG4604 supports SNMP agent functionality, which a computer may change your customized settings and exit this screen to access the NBG4604 using this service...
User Guide - Page 192
Apply
Click Apply to the Internet.
192
NBG4604 User's Guide Access Point Select Access Point if your device routes traffic between clients on the same network.
Reset
Click Reset to return your settings to the default (Router)
Note: If you select the incorrect System Operation Mode you cannot connect to save your settings. Table 74 Maintenance > Sys OP Mode > General...
User Guide - Page 200
Chapter 23 Troubleshooting
2 Press the RESET button for longer than five seconds to set up URL keyword blocking, but I cannot access the NBG4604 or ping any computer from the WLAN (wireless AP or router).
1 Make sure the wireless LAN is enabled on the NBG4604 2 Make sure the wireless adapter on the wireless station is working properly. 3 Make sure the wireless...
Similar Questions
Need To Change Some Settings, Provide Nbg-416n Log In Details.
Need to change some settings, provide NBG-416N log in details
Need to change some settings, provide NBG-416N log in details
(Posted by balakassa 7 years ago)
Router Connection
The connection of this router to my iPhone 5 drops after 2-3 days and I am using the phone as a surv...
The connection of this router to my iPhone 5 drops after 2-3 days and I am using the phone as a surv...
(Posted by mincho50692 8 years ago)
I Need The Quick Start Setup Guide Information To Get Started Can You Help Me?
I ordered this on amazon and the quick start setup guide was not delivered
I ordered this on amazon and the quick start setup guide was not delivered
(Posted by kiki2fly 10 years ago)
