Zanussi ZWT71201WA Support Question
Zanussi ZWT71201WA Support Question
Find answers below for this question about Zanussi ZWT71201WA.Need a Zanussi ZWT71201WA manual? We have 1 online manual for this item!
Question posted by sjmjgm on February 23rd, 2014
Zanussi Zwt 71201 Wa
The machine is not rinsing, spinning and taking conditioner from compartment operating under a programme. Rinsing and spinning does happen if the specific programmes 22 and 24 are chosen. Thank you S Morgan
Current Answers
Related Zanussi ZWT71201WA Manual Pages
Product Manaul - Page 2
...Keep children and pets away from the mains socket.
2
www.zanussi.com Risk of suffocation, injury or permanent disability.
• ...it.
They must have supervision or instruction for the operation of the appliance by a person who is not ...instructions 3 Product description 5 Control panel 6 Washing programmes 9 Drying Programmes 11 Helpful hints and tips 11 First use causes ...
Product Manaul - Page 3
...a 13 amp mains plug. • Do not change the specification of this must block the drum.
• Do not install...8226; The operating water pressure (minimum and maximum) must be between the appliance and the floor.
• Adjust the feet to
www.zanussi.com
3...mains socket only at the end of 8 kg (refer to the "Programme
chart" chapter). • If the supply cord is air circulation between ...
Product Manaul - Page 4
...your laundry with...drying items that you set the drying programme. - Warning!
ance. Old hose ...remove all metal objects from the laundry. • The final part of... start an extra rinse cycle before you set...damaged.
Disposal
www.zanussi.com Only use ...programme. Do not use a 13 amp ASTA (BS 1362) fuse. •
This appliance complies with a moist soft cloth. change the specification...
Product Manaul - Page 7
... opening the door it necessary to rinse the laundry using an extra quantity of the programme». For Synthetics you to switch the appliance on/off : the door can be opened. Drying Time
If you wish to carry out a timed drying programme, press this option. 1-8 Programme selector dial, spin speed button, drying level and time, and...
Product Manaul - Page 9
... fabrics: underwear, coloured garments, non-shrink shirts, blouses.
13-14-15 40°- Rinses Short spin at 700 rpm Max. load kg 3 - SPIN RINSE HOLD
ECO2) SUPER QUICK EXTRA RINSE
EASY IRON
RINSE HOLD SUPER QUICK EXTRA RINSE
SPIN RINSE HOLD EASY IRON
Delicates
Detergent Compartment
3)
www.zanussi.com
9
Reduced load 3 kg 1) For white and coloured cotton (normally soiled items).
6-7-8 90...
Product Manaul - Page 10
... possible however with the Rinse Hold option selected. The machine performs 3 rinses, followed by pressing button 3, we recommend that you reduce the maximum load as indicated.
load 2 kg Special programme for synthetic items
22-Rinses Rinses Long spin at the temperature of water Max. load 7 kg For emptying out the water of Laundry
Options
Detergent Compartment
Dry
17-18-19...
Product Manaul - Page 11
...and the manufacturer's washing instructions. Be careful with bleach, rinse well (whites and fast coloureds only). Drying Programmes
Degree of Drying
Type of them. Remove persistent stains ...woollens.
Before loading the laundry
Never wash whites and coloureds together. Rub particularly soiled areas with bleach.
1) do not use acetone on artificial silk
www.zanussi.com
11
Ball point ...
Product Manaul - Page 12
... fabrics (60°C max) and woollens
• liquid detergents, preferably for low temperature wash programmes (60°C max) for all types of washed laundry, in the appropriate compartments of the
Drying Hints
dispenser drawer before starting the drying programme, reduce the loads of fabric, or special for drying
• Particularly delicate items such as...
Product Manaul - Page 13
... conditioner specifically for tumble dryers.
• Garments padded with an acoustic device, which allows an optimal use
• = May be placed in a more suitable way, according to dry your laundry in the appropriate compartments of the dispenser drawer before starting the wash programme. www.zanussi.com
activated (except if there is de-
Acoustic signals The machine is...
Product Manaul - Page 14
...:
1. Load the laundry
Open the door by pressing button 2
When selecting a programme, the appliance proposes automatically the maximum spin speed provided for about 6 seconds buttons 2 and 3
until it requires (see more details in the appropriate compartment if the selected programme/option it stops.
Turn the selector dial to position to reset the programme/to start the machine...
Product Manaul - Page 15
... the duration of the programme will begin the countdown. the machine starts its hourly countdown. -
Turn the programme selector dial to and then to restart the programme.
15
Press the button again to the new programme position. Press this button repeatedly to change the spin speed, if you have chosen a delayed start the programme. If an incorrect option...
Product Manaul - Page 16
... running. Set the drying programme for synthetic items. By pressing Drying Time button it , you want appears on the display.
Now you press this means that the machine is already heating or that the drum is too high. The blinking appears on .
16
www.zanussi.com Use - Load the laundry. 2. Every time you can...
Product Manaul - Page 17
...spin speed lower than that you wish to open the door before or during the anti-crease phase or to interrupt it is only possible after you can select are washed the first time.
• To clean the filter.
• Perform one or more rinse cycles to switch the machine...switch the machine off.
8. If you set a washing programme and only 10 minutes of the cycle the laundry remains slightly ...
Product Manaul - Page 18
...compartment pulling it should be inspected regularly and particularly if: • the appliance does not empty and/or spin...Replace the drawer and run the rinse programme without any cleaning or maintenance ... a tap, to remove any laundry washing, and according to objects such ...zanussi.com Warning! It is removed from the electricity supply, before you can carry out any clothes in the machine...
Product Manaul - Page 21
... immediately, cancel the delay start :
The machine does not fill: The machine does not empty and/or does not spin:
Possible cause/Solution
The door has not ...zanussi.com
21 The door is squashed or kinked. • Check the drain hose connection. An option or a programme that eliminates all the spinning phases has been selected. • Select the draining or spinning programme. The laundry...
Product Manaul - Page 22
...spinning programme.
22
www.zanussi.com Maybe there is very little laundry in the drum.
• Select drain or spin programme to see this case, redistribute the load manually and select the spin programme.
• Redistribute the laundry... in the drum, the machine will not open:
The machine vibrates is noisy:
Spinning starts late or the machine does not spin:
Possible cause/Solution
Too ...
Product Manaul - Page 23
... more even distribution of the laundry in the drum when spinning, as well as increased stability of your machine: the Service Centre will require this information. Mod Prod. The selected drying time or the drying programme was not suitable for the laundry. • Select the suitable drying time/programme for the laundry. Now you are unable to...
Product Manaul - Page 24
... all transit devices so that they can be refitted if the machine ever has to the
display on the ambient temperature.
Minimum Maximum...Programme 60° 1)
Cottons 40°
0.85
67
For the duration of laundry, on the inlet water temperature and on the control
67
panel.
Overall power - Installation
Unpacking All transit bolts and packing must be transported again.
24
www.zanussi...
Product Manaul - Page 30
.... A strip of beading approximately 605 mm W, x 5 mm H, x 25 mm D must be carried out with the machine on spin with its front edge as far forward as the adjoining plinth line will provide additional security. G Position the base into the ...and if possible be fitted in front of the appliance feet.
30
www.zanussi.com The material used to construct the base should run
from spare parts.
Product Manaul - Page 31
...The power supply cable must be easily accessible after installing the machine. Environment concerns
Caution! Connect the machine to comply with the symbol are recyclable. >PEPSPP The manufacturer... please contact your local council, your domestic electrical installation can take the maximum load required, also taking into account any responsibility for the environment and human health, which...
Similar Questions
Can't Start The Machine
Power is on to display, all symbols, but nothing works.
Power is on to display, all symbols, but nothing works.
(Posted by hughwolfson 10 months ago)
Zanussi Washing Machine Not Taking Detergent And Will Not Spin After Drum Is Fil
My zanussi model ZWH6140p doesn't take the detergent and when the drum is filled with water the star...
My zanussi model ZWH6140p doesn't take the detergent and when the drum is filled with water the star...
(Posted by jmnsons2 2 years ago)
The Machine Overflows With Water When Going Through A Wash Or Rinse Cycle
the machine fills with water and it overflows out of the top drawer
the machine fills with water and it overflows out of the top drawer
(Posted by emmagoldsworthy 8 years ago)
Zwi 71201 Wa. Rear Feet Adjusters, Cannot Adjust / Align / Level.
the allthread seems to be seized in the plastic insert, Wickes claim there are locking "pins" involv...
the allthread seems to be seized in the plastic insert, Wickes claim there are locking "pins" involv...
(Posted by trevormountford 10 years ago)