Zanussi ZWI71201WA Support Question
Zanussi ZWI71201WA Support Question
Find answers below for this question about Zanussi ZWI71201WA.Need a Zanussi ZWI71201WA manual? We have 1 online manual for this item!
Question posted by maymccluskey on October 24th, 2013
Hinges
Where Do You Fit Hinges Before Delivering Machines To Us?
Current Answers
Related Zanussi ZWI71201WA Manual Pages
Product Manaul - Page 1
EN User manual Washing Machine
ZWI 71201 WA ZWI 71401 WA
Product Manaul - Page 4
... wet with a moist soft cloth. Risk of injury, electrical shock, fire, burns or damage to the appliance.
• Use this machine incorporates a special feature.
4
www.zanussi.com Only use abrasive products, abrasive cleaning pads, solvents or metal objects. Old hose sets must....
• Do not touch the glass of injury or suffocation.
• Disconnect the appliance from the laundry.
Product Manaul - Page 6
Before opening the door it necessary to rinse the laundry using an extra quantity of water (extra rinse), select this option the machine performs a prewash cycle before the main wash phase.
Extra Rinse
This appliance is gently washed and spun to avoid any creasing. If it will be ...
Product Manaul - Page 7
...; Alarm codes In the event of the display for example (see paragraph «What to interrupt the selected programme. The door can be opened . The
machine is displayed again. The integrated red light of button 7 starts flashing.
• End of button 7 go out. Delay Start The programme can be opened . The...
Product Manaul - Page 8
...fabrics: acrylics, viscose, polyester.
10 - 11 - 12 40° - load 2 kg Washing programme for machine washable wool as well as for delicate fabrics with «hand washing» care symbol.
13 40° Main... Fabrics Load Type of Laundry
Cottons
1 - 2 - 3 - 4
1)
90° - 30°
Main wash - Rinses
Maximum spin speed at 1200 rpm for model
ZWI71201WA
Maximum spin speed at 900 rpm Max...
Product Manaul - Page 9
load 3 kg With this time the machine will be used for heavily soiled laundry. SPIN REDUCTION RINSE HOLD PREWASH EASY IRON 4)
15 - Rinses Maximum spin speed at ...the programme selector dial to wash with an extra water load. At the end of Laundry
Options
14 - Detergent Compartment
5)
www.zanussi.com
9 The machine performs a soak at 700 rpm Max. Pour the detergent for about 40 minutes -...
Product Manaul - Page 10
... 30' Main wash - Rinses Maximum spin speed at 1400 rpm for model ZWI71401WA Max. The machine performs 3 rinses, followed by pressing button 3, we recommend that you reduce the maximum
load as... soiled cotton laundry.
2) This option is possible however with somewhat reduced cleaning results.
4) Max. Spin Drain and long spin Maximum spin speed at 1200 rpm for model ZWI71201WA (1400 rpm...
Product Manaul - Page 11
... 60 °C cotton
3.5
0.78
Standard 40 °C cotton
3.5
0.61
1) At the end of laundry, the water and ambient temperature. tre)
67 67 42 63 55
53 47 47
Approximate programme duration (... Mode (W)
0.10
0.98
The information given in the charts above are approximate. Sort the laundry as follows: whites, coloureds, synthetics, delicates, woollens. Remove hooks or tie them prior to...
Product Manaul - Page 12
...above, then treat stains with rust stains which are washing a small load
• the laundry is classified in so-called "degrees" of detergent and use and do not use acetone ... before starting the wash programme. Treat any additives must be selected.
All commonly available washing machine detergents may be placed in water and detergent, rinse and treat with bleach. If using liquid...
Product Manaul - Page 13
...buttons again, the acoustic signal is not working.
Load the laundry
Open the door by or cause damage to remove any ...laundry in order to set this option press simultaneously for about 6 seconds buttons 2 and 3 until on the display, the icon appears or disappears. Close the door. Personalisation
er in the drum, one item at the end of water leakage or damage to start the machine...
Product Manaul - Page 14
...selected programme, press this button repeatedly to change the spin speed, if you want your laundry to the required programme.
www.zanussi.com Measure out the detergent and the fabric softener
Pull... illuminate.
Select the Delay Start by means of button 7 starts to delay the start , the machine will not perform the new selected programme. You must not exceed the «MAX» mark...
Product Manaul - Page 15
... the selector dial to to . Opening the door after having started
First set the washing machine to PAUSE by turning the selector dial to cancel a programme which is running , the ... The door will start by pressing the relevant button.
4.
Press button 7. Set the washing machine to turn at regular intervals until water draining. Altering an option or a running programme is ...
Product Manaul - Page 16
... the softening powder manufacturer's instructions. Warning! If you can carry out any clothes in the machine. Leave the door open to carry out another wash, close the water
tap. Replace the drawer...Do this separately from any traces of accumulated powder. out under a tap, to remove any laundry washing, and according to clean the recess, ensuring that the drum is empty. You must DISCONNECT...
Product Manaul - Page 19
..., press the button 7 to be washed immediately, cancel the delay start :
The machine does not fill: The machine does not empty and/or does not spin:
Possible cause/Solution
The door has not... closed . • Open the water tap.
The delay start has been selected. • If the laundry are blocked. • Clean the water inlet filters. (See "Cleaning the water inlet filters" for
more...
Product Manaul - Page 20
...after 10 minutes, the laundry is still not evenly distributed in the drum, the machine will not open:
The machine vibrates is noisy:
Spinning starts late or the machine does not spin:
Possible...8226; Redistribute the laundry. The correct temperature was not selected.
• Check if you have not been adjusted
• Check the correct levelling of the inlet hose fittings. Maybe there is ...
Product Manaul - Page 21
... on the electrical connection is fitted with other traditional motors.
No
Ser. Minimum Maximum
0,05 MPa 0,8 MPa
Cotton
7 kg
Maximum
1200 rpm (ZWI71201WA) 1400 rpm (ZWI71401WA)
Installation... Machines based on the inner edge of the machine. This new motor ensures a softer start and more even distribution of the laundry in the drum:
Possible cause/Solution
The machine ...
Product Manaul - Page 25
... kitchen
furniture ensure, if possible, the hoses are
placed in either of the two recesses on the
back of the door The machine is sufficient to screw in the hinges (1) and the counter-magnet (6) provided with the appliance, at the right level (Fig. C
coming kinked or trapped.
595-598
22±1,5
6
1
7
54...
Product Manaul - Page 26
...of the door. B) supplied with the appliance. • c) Mounting the door Fix the hinges (1) to the machine by means of screws for a magnetic closure of the door. To align the door perfectly ... to the door by means of the M 5x15 screws (3-Fig. Recommendations regarding the construction and fitting of a base when the installation requires an integrated appliance to be 416 mm. thickness 16-22...
Product Manaul - Page 27
...directly in this position is left between the top of the machine and the underside of timber should be carried out with the machine on spin with its front edge as far forward as the... adjoining plinth line will allow a small strip of beading to be fitted in front of beading approximately 605 mm ...
Product Manaul - Page 28
Packaging materials
The materials marked with the symbol are recyclable. >PEPSPP For more detailed information about recycling of this product, please contact your local council, your household waste disposal service or the shop where you will help prevent potential negative consequences for the recycling of electrical and electronic equipment.
Instead it should be treated as household ...
Similar Questions
When I Switch On The Washer It Goes Straight Washing.
I can not set any settings and then in a few minutes it goes to end
I can not set any settings and then in a few minutes it goes to end
(Posted by davethatch 2 years ago)
Washer/dryer Approx 5 Years Old
Ongoing problem with no lights showing in display. Washer works fine for a while but then when wanti...
Ongoing problem with no lights showing in display. Washer works fine for a while but then when wanti...
(Posted by derekhenson 4 years ago)
Feet Unbalanced On Washer Unsure Which Size Spanner
Hi, Would you know which spanner size you need to adjust the feet as been unbalanced since I purchas...
Hi, Would you know which spanner size you need to adjust the feet as been unbalanced since I purchas...
(Posted by riverstream100 7 years ago)
Zanussi Zwt 71401 Wa Washer/dryer
starting problem. when turning the dial to select a program nothing is showing in led display. somet...
starting problem. when turning the dial to select a program nothing is showing in led display. somet...
(Posted by derekhenson 7 years ago)
New Zanussi Washer Drier Teething Problems??
The detergent is still in the drawer after the programme has completed??? why? also why on page 9 of...
The detergent is still in the drawer after the programme has completed??? why? also why on page 9 of...
(Posted by carolhaywood 10 years ago)