Stihl FS 111 RX Support Question
Stihl FS 111 RX Support Question
Find answers below for this question about Stihl FS 111 RX.Need a Stihl FS 111 RX manual? We have 1 online manual for this item!
Question posted by chrissynchris96 on June 25th, 2019
Idle Speed
what is the engine rpm at a idle on a FS111rx
Current Answers
Related Stihl FS 111 RX Manual Pages
Instruction Manual - Page 3
...19
Balancing the Machine
19
Starting / Stopping the Engine
20
Operating Instructions
22
Replacing the Air Filter
22
Engine Management
23
Adjusting the Carburetor
23
Spark Arresting ...who fully understand this manual. Always wear proper eye protection.
{
FS 111 RX
This instruction manual is a high-speed cutting tool some special safety precautions must be recycled. Contact your ...
Instruction Manual - Page 4
... procedures described in the manual may not be on the machine are supported by illustrations.
As a result, engineering changes and improvements are made from those described in the illustration.
A description of its individual components.
2
FS 111 RX Press to an illustration may be covered in this manual may contain paragraphs that , if not avoided...
Instruction Manual - Page 5
...for use it off and make sure your body, it may be hazardous. the operator
2. FS 111 RX
3 Read the instruction manual and the safety precautions periodically.
WARNING
Do not use on the ...power tool run unattended. Safety Precautions and Working Techniques
Because a trimmer is a high-speed, fast-cutting power tool, special safety precautions must be in good physical condition and mental...
Instruction Manual - Page 6
... advice immediately.
WARNING
The deflector provided with constant, excessive pressure. Most STIHL power tools are mentioned as factors in loss of injury, the operator should
4
FS 111 RX A power tool with loose components or with damaged or worn AV elements will not protect the operator from all times, but cold weather, smoking and...
Instruction Manual - Page 7
... chapter "Approved Combinations of movement. For the cutting attachments authorized by STIHL for use may damage your goggles or protective glasses. Check in any way. FS 111 RX
5 Continual and regular users should have it was not designed (e.g. Steel-toed safety boots are useable with nonslip soles. Wear long pants made of heavy...
Instruction Manual - Page 8
...to release slowly. If this happens, change your power tool in the fuel tank opening.
6
FS 111 RX Grip the shaft in a manner that combustible fuel vapor may be carried only in a vehicle... fueling and move at least 10 feet (3 m) from the fueling spot before starting the engine.
WARNING The gearbox becomes hot during operation.
When transporting it in a horizontal position. Note...
Instruction Manual - Page 9
... visible parts, e.g., filler cap, hose connections, manual fuel pump (only for you to the idle position.
it . See also the "Fueling" chapter in safe operating condition. Never use the...not start the engine if there are leaks or damage - Arrows on the spark plug - Failure to use a power tool that is securely mounted on the deflector (as possible.
FS 111 RX
7
Never attempt...
Instruction Manual - Page 10
...idle speed, have your power tool under control at idle, attach the power tool to the spring hook of your harness if you are wearing one) to keep children away from loss of moisture, pitch, oil, fuel mix or grease.
002BA054 KN
8
FS 111 RX... to idle. At correct idle speed, the cutting attachment should release the starting work area, even when starting -throttle, engine speed will be...
Instruction Manual - Page 11
...engine speed. WARNING The rotating cutting attachment may result. Work carefully. WARNING
As soon as the engine is coated with a chemical substance (such as unburned hydrocarbons (including benzene) and carbon monoxide, that accompanied the substance at least
FS 111 RX...support. In the event of an emergency, switch off the engine immediately by ricochet a great distance.
15m (50ft)
To ...
Instruction Manual - Page 12
... reduce the risk of injury, always shut off the engine before adjusting the length of metal and other solid objects which may shatter at high speed and cause serious or fatal injury.
Never use , ...risk of injury, since the ignition is normally in heat radiation, sparks or sound level,
10
FS 111 RX should be cleaned off the trimmer, which could cause an increase in the "ON" position ...
Instruction Manual - Page 13
...or loss of control, never attempt to idle or is designed to reduce the risk of fire from the muffler and need no service or maintenance. FS 111 RX
11 Your muffler is furnished with a catalytic...the cooling process of the heat from the emission of the engine by a chemical process in overheating and damage to its operating speed. Remove excess lubricant and all debris such as a result...
Instruction Manual - Page 14
...of wire could result in your instruction manual.) If the lawn edges are planted with mowing head). STIHL PolyCut mowing head ... any nonroad engine repair establishment or individual. However, if you make a warranty claim for cracks at high speed toward the ... bark etc. Check PolyCut blades for a component which
FS 111 RX Sharpening is advanced automatically. English
Mowing heads are to be...
Instruction Manual - Page 19
... further details, see www.STIHLusa.com/ethanol
The ethanol content in engines and should not move. At correct idle speed, the cutting tool should not be used to block the shaft.
To help your STIHL engine, use STIHL HP Ultra oil or equivalent. FS 111 RX
17
Gasoline with an ethanol content of control and / or contact...
Instruction Manual - Page 23
.... Adjust the carburetor so that there is idling. Other Hints on the ground with your left hand and press down the throttle trigger lockout and open the throttle - N Check that the cutting attachment does not run when the engine is now ready for operation. FS 111 RX
0000-GXX-1319-A0
0000-GXX-1674-A0...
Instruction Manual - Page 24
...around
the filter. Replacing the Air Filter
Filters have to cool down firmly.
22
FS 111 RX N Remove the filter element (3). English
Engine is already filled with fuel.
This avoids unnecessary high loads during the break-in ... refueling, press the manual fuel pump bulb at idle speed so that engine heat can be run for the first three tank fillings. N Replace any damaged parts.
Instruction Manual - Page 25
...Idle Speed
English
Spark Arresting Screen in Muffler
N If the engine is idling
N Turn the idle speed screw (LA) slowly counterclockwise until the engine runs smoothly -
N Clean the spark arresting screen (5). Engine...0495-A0 0000-GXX-0486-A0
FS 111 RX
5
Engine stops while idling
N Warm up the engine for about another 1/2 to run . If the screen is idling, have your machine checked and ...
Instruction Manual - Page 26
... firmly onto the spark plug. English
Spark Plug
Checking the Spark Plug
N If the engine is loose or missing. see "Specifications". N Check electrode gap (A) and
readjust if ...This can result result in serious injuries or damage to start or runs poorly at idle speed, first check the spark plug. Working in fuel mix. - N Pull off...24
FS 111 RX or sooner if the electrodes are : -
Instruction Manual - Page 29
... cutting attachment must not rotate
X
X
Adjust idle speed
Spark plug
Readjust electrode gap Replace after each ... dealer1)
Have replaced by servicing dealer1)
Check
X
Spark arresting screen in muffler
Clean or replace
All accessible screws and nuts (not adjusting screws)
Retighten
FS 111 RX
X
X
X
X
X
X
X
X
X
X
X X
X X
X
X
X
X
X
X
27 If your daily working time is ...
Instruction Manual - Page 32
... deflector which the engine has been shown to ISO 8893:
Idle speed:
1.92 cu.in (31.4 cc)
1.57 in (40 mm)
0.98 in (25 mm)
1.4 bhp (1.05 kW) at the proper length. mowing head, for different purposes.
17 Deflector for which keeps the line of the mowing head at 7,000 rpm
2,800 rpm
FS 111 RX English
Definitions...
Instruction Manual - Page 33
...of this manual. Disposal
Observe all country-specific waste disposal rules and regulations. output shaft speed (cutting attachment):
7,150 rpm
Valve clearance
Inlet valve:
0.004 in (0.10 mm)
Exhaust valve:
0.004 in (0.10... and deflector
11.0 lbs (5.0 kg)
FS 111 RX
31 Contact your STIHL servicing dealer for environmentfriendly recycling. English
Cut-off speed (rated): 9,500 rpm
Max.
Similar Questions
What Tool Is Needed To Adjust The High And Low Speed On The Fs 90r String Trimm
what tool is needed to adjust the high and low speeds on the carburetor of the stihl fs 90r string t...
what tool is needed to adjust the high and low speeds on the carburetor of the stihl fs 90r string t...
(Posted by ckneejoint 10 months ago)
Won't Idle
when I put my trimmer in choke it will start and idle, when I hit trigger and the choke disengages i...
when I put my trimmer in choke it will start and idle, when I hit trigger and the choke disengages i...
(Posted by morgandeel640 2 years ago)
Part No For Stihl Km90r On/of Switch
i require 1 new on/of switch for my stihl km90r want part no or where it can be purchased its orange...
i require 1 new on/of switch for my stihl km90r want part no or where it can be purchased its orange...
(Posted by johnnash222 8 years ago)
Wont Come Up To Speed Or Idle
Installed carb kit and new hoses with filter. Cleaned muffler. It will run but not upm to speed. It ...
Installed carb kit and new hoses with filter. Cleaned muffler. It will run but not upm to speed. It ...
(Posted by danbrooks69 10 years ago)