Singer One Support Question
Singer One Support Question
Find answers below for this question about Singer One.Need a Singer One manual? We have 19 online manuals for this item!
Question posted by Christychristensen58 on August 24th, 2016
Getting C Error Ten Machine Quits Sewing Pause Will Sew A Few Stocked Ten C Erro
getting C error I pause it sews a couple seconds and Cerror again the stitches seem fine
Current Answers
Answer #1: Posted by zzed41 on August 25th, 2016 1:38 AM
zzed41
Member since:
December 12th, 2014 Points: 914,010
Member since:
December 12th, 2014 Points: 914,010
Hi! You need to be more specific with the error. It should have a number after C, i.e. C1, C7, etc. Anyway, please check the link below for a list of the error codes and what they mean.
http://www.manualslib.com/manual/461355/Singer-One.html?page=58
Hope this helps! If it does, please click on the Accept Answer button. I will greatly appreciate it! :)
Related Singer One Manual Pages
Instruction Manual 3 - Page 20
Needle Position
a111111111•11111111
Stitch Width
SETTING THE MACHINE • Move needle position selector to set your sewing machine for stitching start the machine. To sew 'perfectly on a wide variety of fabrics, adjust stitch length, pressure and thread tension as instructed on
STARTING TO SEW • Place needle and bobbin threads under
presser foot and draw to back of...
Instruction Manual 3 - Page 27
... setting from 1 to 4 will
give you an open , or farther
V
apart, your stitches will be. Stitch Length Dial
ADJUSTING PRESSURE AND CHOOSING ACCESSORIES Turn to detailed instructions for sewing with zig-zag stitch patterns included in the section called "Sewing the Professional Way" that starts on adjusting pressure.
For information on choosing accessories, refer to...
Instruction Manual 3 - Page 36
..., zippers, and hems in the fabric.
. For sharp points on sewing special fabrics
Diagonal Stitching Across the Point
LEATHER -LOOK VINYL
. Sew with a long stitch (1 to metal surfaces. Use a strip of some vinyls tends to stick to 3 mm). Always use a fine ball-point needle.
• Machine-worked buttonholes (as well as bound buttonholes) can be ripped...
Instruction Manual 4 - Page 5
...8226; Adjusting Needle-thread Tension • Adjusting Stitch Length Finding the Beginning of a Pattern Unit Adjusting Stitch Balance When Using Flexi-Stitch Patterns Interchangeable Fashion and Flexi-Stitch Discs
5. Free-Arm Sewing Your Personal Measurements
10. Getting to Sew Needles Operating Machine Choosing Needle and Thread Threading the Machine Threading the Needle • Winding the...
Instruction Manual 4 - Page 26
...For seaming and speed basting.
/ A•
/A \
/ A
A
A \ / • / A \ / A\ / Multi-stitch Zig-Zag.
Leaf Stitch.
L/7z.t7.!3O
F\F_L_-
Extremely versatile. Your sewing machine has ten built-in the machine when delivered). four Fashion Stitch and eight Flexi-Stitch patterns. In the section called "Sewing the Professional Way," beginning on both decorative and...
Instruction Manual 4 - Page 37
... • Bobbin-case Insert • Straight-stitch Plate • Zig-Zag Foot
1. Hold loop and cut thread about an inch from end of stitching.
4. Lower foot.
• Start machine and stitch to its highest point.
2. SEWING A CHAINSTITCH SEAM
• Stitch: Straight I
A • Stitch Width:Q
• Needle Position: • Stitch Length: 10 to Sew 3
)\,
Cutting Thread
Pulling OutiLoop of...
Instruction Manual 4 - Page 51
....
A NORM (normal) pressure setting is usually best for Sewing Knits
45
To start to stitch. GUIDING AND SUPPORTING FABRIC
Most stretch and knit fabrics need only to break. This will reinforce the ends of machine. The FlexiStitch pattern itself will prevent the threads being stitched.
• For nylon tricot and similar synthetic knits, apply...
Instruction Manual 4 - Page 52
... is equally useful for seams that give s-t-r-e-t-c-h to insert a ball-point Yellow Band needle in machine if you sew, letting the machine make the back-and-forth stitches that receive an unusual amount of machine. Lower the presser foot and start machine, holding the thread ends as you are made.
3. Draw needle and bobbin threads under...
Instruction Manual 4 - Page 56
... speed. Thread usage information is tabulated on sewing knit and stretch fabrics. fake fur
FABRIC-HANDLING TABLE
SPECIAL HANDLING
Use transparent tape as it passes under the presser foot. Stitch in direction of machine accessories, will vary with the fabric. STITCH Length-Type
6-8 1 Straight Stitch
10-15 Straight Stitch for seams
12-15 Zig-Zag or...
Instruction Manual 4 - Page 76
... for your Machine Chainstitching Checklist, Performance Choosing Needle and Thread Corded Seams Darning Darts Decorative Touches Discs Fashion Stitch Discs Flexi-Stitch Discs Changing Elastic, Replacing Electrical Connections Embroidery Even Feed Foot Fabric-Handling Table Fabric, Thread, and Needle Table Fashion Stitch Discs Finishes for Hems and Facings Flexi-Stitch Discs Free-Arm Sewing Free...
Instruction Manual 5 - Page 20
... and the machine will sew forwards again. (1)
Removing the work behind the needle and presser foot. (2)
Cutting the thread
Pull the threads behind the presser foot. Pull threads down the reverse sewing lever (A). Reverse sewing
To secure the beginning and the end of the face plate and into thread cutter (B). Sew a few reverse stitches. Guide the...
Instruction Manual 5 - Page 26
... into the left and right holes of the button and sew (2). For buttons with about 10 stitches.
Position the work forward and then sew through the front two holes first (1), push the work under the foot. Adjust the stitch width to button sewing foot. (B) Select zigzag stitch. Place the button on the marked position, lower the...
Instruction Manual 6 - Page 31
... threads under foot and stitch through
machine in front of hemmer evenly into hemmer scroll.
presser foot.
• Hold thread ends in left hand and guide raw edge in place of fabric,
and stitches a perfectly turn- APPLICATIONS
Fine Hems Edging Ruffles Hemmed Seams
Hemming with Lace Lace Insertion
Lingerie Finishes Sew slowly, still holding thread...
Instruction Manual 8 - Page 38
... a la derecha y levantar la aguja hasta la posici6n mas alta.
3. Cousez 4 ou 5 points. Stitch backward to the end
1 ---
H
36
Atacar 4 6 5 puntadas. PROCEDURE
1. Stitch forward to the end 4. Stop
sewing at the left
-^
stitch and raise needle. I
2 2
1
2. Stop sewing at the right stitch and raise needle to
adelante hasta el final de
jusqu'au repere a la fin...
Instruction Manual 11 - Page 34
...machine will sew forward again. (1)
A
Removing the Work
Turn the handwheel toward you (counterclockwise) to bring
the thread take up lever to its highest position and the needle begins to cut. (3)
27
B 3 Pull threads down
the reverse sewing lever (A). EN Reverse Sewing... foot. (2)
Cutting the Thread
Pull the threads under and behind the presser foot. Sew a few reverse stitches.
Instruction Manual 13 - Page 80
...-19
Fabric Weight Table
12-13
Flexi-Stitch Patterns
33, 48
Free-Arm Sewing
71
Guiding and Supporting Fabric
49
Light Bulb
74
Lower Thread Tension
37
Mending Mock Overedging
Needle Changing Threading Thread Tension
Needle Plate Changing Plates Feed Cover General Purpose Straight-Stitch
Operating the Machine Overedged Seams
Patterns Blindstitch Fagotting (Featherstitch...
Instruction Manual 15 - Page 3
... on the floor.
Use only the handle to lift and move the machine.
• Never operate the machine if it has a damaged cord or plug, if it is required around the sewing machine needle.
• Do not pull or push fabric while stitching. Special care is not working properly, if it to the off when...
Instruction Manual 18 - Page 3
WARNING - Contact your nearest Service Center should any adjustment be left unattended when plugged in. Special care is required around the sewing machine needle. * Do not pull or push fabric while stitching.
To reduce the risk of burns, fire, electric shock or injury to persons:
* Be sure that they do not play with the...
Instruction Manual 18 - Page 50
...of gather therefore set knob to suit the fabric and test sew before sewing your garment.
• When stitch length dial is set the differential feed adjusting lever
•...Sew along edge of foot. Lower foot & begin to graduation "1.0".
To set at front of fabric togather. Shirring & shirred seams
• Attach (optional) shirring foot • Set machine up for 4-thread mock safety stitch...
Instruction Manual 19 - Page 3
... air openings blocked. Read all moving parts. It may deflect the needle causing it is required around the sewing machine needle.
• Do not pull or push fabric while stitching.
IMPORTANT SAFETY INSTRUCTIONS
When using the machine. The wrong plate can cause the needle to break.
• Do not use as threading needle and...
Similar Questions
Machine Quit Sewing Properly
My thread keeps balling up on the first two stiched
My thread keeps balling up on the first two stiched
(Posted by rjmarley 4 years ago)
C6 Error Continues. Re-threaded The Machine Multiple Times Ensuring The Thread W
have rethreaded the machine sooooo many times following the video to ensure the thread was "under th...
have rethreaded the machine sooooo many times following the video to ensure the thread was "under th...
(Posted by Kblakey11 7 years ago)
Error
what is the c6 error on my singer sewing machine it's driving me crazy
what is the c6 error on my singer sewing machine it's driving me crazy
(Posted by cfife9056 7 years ago)
I'm Getting C6 Error Message In Singer One Plus.
The manual suggests that I have a broken top thread. I have retreaded several times and it lets me s...
The manual suggests that I have a broken top thread. I have retreaded several times and it lets me s...
(Posted by chockley 8 years ago)
Singer Sew Mate Tension And Stitch Length
My thread keeps wadding up on the underside of the fabric. What should the tension be set on and how...
My thread keeps wadding up on the underside of the fabric. What should the tension be set on and how...
(Posted by Cinden 10 years ago)