Sharp LC 32D62U Support Question
Sharp LC 32D62U Support Question
Find answers below for this question about Sharp LC 32D62U - 32" LCD TV.Need a Sharp LC 32D62U manual? We have 1 online manual for this item!
Question posted by dssekhon on April 13th, 2012
Is It Worth Fixing And How Much It Cost?
The TV is not turning on after the power surge spike. The power indicator is blinking 3 times with 1 opc blink. Check ywith sharp and they try resting the TV by holding down the volume down key with input key. The TV turn on for 2 seconds and go back to blinking. Anyone know how to fix it? If a tech is involved, is it worth fixing with the cost?
Current Answers
Answer #1: Posted by TVDan on April 14th, 2012 7:14 AM
TVDan
Member since:
August 8th, 2011 Points: 4,732,000
Member since:
August 8th, 2011 Points: 4,732,000
This blink code means: Communication line failure or main CPU start-up failure. This usually means the mian board has failed. If your serail number is 851112-899550 then here's a source: http://www.shopjimmy.com/sharp-sj-duntke230fm06-main-unit.htm, serial number 800002-851111 then here's a link to see the part number: http://www.shopjimmy.com/sharp-duntke028fm06-main-board.htm
TV Dan
Related Sharp LC 32D62U Manual Pages
LC-32D64U | LC-37D64U Operation Manual - Page 3
... of the TV. CAUTION
RISK...vary slightly from Sharp in the space...LCD-CLOTH) or triple (00Z-LCD-CLOTH-3) packs.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL. NO USER-SERVICEABLE PARTS INSIDE.
IMPORTANT: To aid reporting in case of uninsulated "dangerous voltage" within a triangle is intended to alert the user to persons.
ENGLISH
LC-32D64U LC-37D64U
LIQUID CRYSTAL TELEVISION...
LC-32D64U | LC-37D64U Operation Manual - Page 6
... product. Please note that produce heat. • The Liquid Crystal panel is connected to the television equipment, be located in the vicinity of overhead power lines or other openings in wire to an antenna discharge unit, size of grounding conductors, location of time, unplug it , such materials may appear on the top or near...
LC-32D64U | LC-37D64U Operation Manual - Page 7
...attempt to follow the instructions. Hex key
2
Screws
Soft cushion
Vertical mounting
Angular mounting
About setting the TV angle
LC-32D64U
• The center of the TV. Screws
3
Hex key
Setting the TV on .
LC-37D64U
• The center of ... the TV to lay the TV on the Wall
CAUTION
• This TV should only be mounted when with only the AN-37AG2 wall mount bracket. SHARP bears ...
LC-32D64U | LC-37D64U Operation Manual - Page 8
... THE OUTLET AND REPEAT THE INSTALLATION STEPS. Ferrite core
4 How to turn the power on the AQUOS television. If the POWER indicator on the AQUOS television still does not light up, press TV POWER on the remote control to turn on the TV. In addition, do not expose the remote control unit to liquids, and do not place in the...
LC-32D64U | LC-37D64U Operation Manual - Page 10
...SHARP CUSTOMER 3 IMPORTANT SAFETY INSTRUCTIONS 3 QUICK REFERENCE 5
Attaching/Detaching the Stand 5 Setting the TV...TV 12 Turning On/Off the Power 12 Initial Setup 12 Direct Button Operation 13 On-Screen Display Menu 17 Menu Items 17 On-Screen Display Menu Operation 18 Menu Operation Buttons 18 Picture Menu 19
OPC... Play Time 27 ...32 Controlling HDMI Equipment Using AQUOS LINK ...32...
LC-32D64U | LC-37D64U Operation Manual - Page 12
...
8 VOLk/l: Set the volume. (See page 13.) 9 SURROUND: Select Surround settings. (See page 13.)
10 FREEZE: Set the still image. This button will light. Indicator lights up for TV, CBL/SAT, VCR, ...pages 32 to press FUNCTION and DISPLAY at the TV. 10
1 TV POWER: Switch the TV power on or enters standby. (See page 12.)
2 DISPLAY: Display the channel information.
3 SOURCE POWER: Turns the power ...
LC-32D64U | LC-37D64U Operation Manual - Page 13
...6
Cable RGB cable (commercially available)
Terminal on the TV. (See page 13.)
CAUTION
• To protect equipment, always turn off the TV before connecting any external equipment. • Please read the...only support digital signal. • Refer to page 38 for a list of the connected equipment to PCM, 32/44.1/48 kHz and 16 bits. In this case, set the equipment to 1080p output.
*2 • ...
LC-32D64U | LC-37D64U Operation Manual - Page 14
...;rst time, it will start automatically.
• To exit the Channel search screen, select "Cancel", and then press ENTER.
• If no remote control signal is on. (After a few seconds, a window
appears with your TV and try EZ Setup again. (See page 21.)
Watching TV
Turning On/Off the Power
POWER
Press POWER on the TV, or TV POWER on the...
LC-32D64U | LC-37D64U Operation Manual - Page 15
...automatically displays. • Each time INPUT is pressed, the ...automatically goes out after the TV is turned on the menu items. (...TV or on the remote control unit. • To increase the volume, press VOLk. • To decrease the volume, press VOLl.
20
Audio status
Output device Speaker
Output Select
Fixed
Variable
Variable sound
Mute
• When "Output Select" is set, its indicator...
LC-32D64U | LC-37D64U Operation Manual - Page 16
...to customize settings as shown below :
Example: When the input source is TV, INPUT 1, 2 or 3 terminals STANDARD MOVIE GAME USER [TV]
DYNAMIC
DYNAMIC (Fixed)
Example: When the input source is INPUT 4, 5 or 6 terminals... in a digital broadcast include SURROUND as well as shown below to match the television broadcast signal.
The xvYCC signal allows you to fixed
mono-sound mode....
LC-32D64U | LC-37D64U Operation Manual - Page 19
On-Screen Display Menu
Menu Items
For TV/INPUT 1/2/3 Mode
Picture Menu
OPC Page 19 Backlight Page 19 Contrast Page 19 Brightness Page 19 Color Page 19 Tint Page 19 Sharpness Page 19 Advanced
C.M.S.-Hue Page 19...Option Menu AQUOS LINK Setup Pages 32-34 Audio Only Page 26 Digital Noise Reduction Page 26 HDMI Setup Page 26 Output Select Page 26 Game Play Time Page 27 Operation Lock Out ...
LC-32D64U | LC-37D64U Operation Manual - Page 20
...in white • This indicates that the item cannot be... Title Display
[No]
Game Play Time
[Off]
Operation Lock Out
[Off...OPC
Off
On
Backlight [b12] a16
Contrast [b30] 0
Brightness [ 0] a30
Color
[ 0] a30
Tint
[ 0] a30
Sharpness...Fixed]
Color System
[Auto]
Caption Setup
Digital Caption Info.
VOLl/k: Cursor c/d on the remote control.
Button operations on the control panel...
LC-32D64U | LC-37D64U Operation Manual - Page 23
... viewable in the set to"Enable", the power will change to "DYNAMIC (Fixed)". CH Search: Channel auto search makes the TV look for setting each item. • If...power shuts down , the remaining time displays every minute.
• "Disable" is the factory preset value.
Air/Cable: Make sure what kind of connection is found, confirm the type of connection made
with your TV and try...
LC-32D64U | LC-37D64U Operation Manual - Page 28
... VOLk/l on the remote control unit or VOLl/k on the TV. Fixed: Sound via the R-AUDIO -L terminal.
• Refer to... :
Auto/NTSC/PAL-M/PAL-N
• "Color System" can turn the screen off and enjoy audio only.
Audio Select: Digital: ... setting a secret number.
26 Program Title Display Favorite CH Game Play Time Operation Lock Out
[Low] [Fixed]
[No] [Off] [Off]
1 Press MENU to display the...
LC-32D64U | LC-37D64U Operation Manual - Page 32
.../SAT (cable converter) or DVD.) The LED lights up , press
FUNCTION and DISPLAY at the same time.
1 SOURCE POWER • Turns the connected equipment power on the SAT GUIDE screen or SAT MENU screen. (SAT). The LED will blink.
3 Press 0-9 to enter the manufacturer code. (See
page 31.) • Preset mode is pressed, the DVD...
LC-32D64U | LC-37D64U Operation Manual - Page 34
...LINK function. • The steps in standby mode, it automatically turns on page 33 need to be completed beforehand. • Refer to....
˙ Control the AQUOS LINK-compatible audio system Set the volume of AQUOS LINK-compatible audio system.
• The above description ...when the FUNCTION of HDMI cable used with this TV.
32
Make sure to use an HDMI-certified cable. •...
LC-32D64U | LC-37D64U Operation Manual - Page 35
.... Auto Power On
Selecting Recorder
Yes
No
Selecting Recorder
When multiple AQUOS LINK-compatible devices are viewing a broadcast received with equipment other than the AQUOS LINK-compatible recorder selected in "Model select" or other equipment is connected between the TV and recorder, "Sub" is enabled. Check the following buttons during broadcast viewing.
J Hold down...
LC-32D64U | LC-37D64U Operation Manual - Page 37
...signal being input? (See page 38.)
• No sound
• Is the volume too low? (See page 13.) • Is "Variable" selected in after ...power
Possible Solution
• Check if you pressed TV POWER on the remote control unit. (See page 12.) If the indicator on the TV does not light up, press POWER on the TV.
• Is the AC cord disconnected? (See page 6.) • Has the power been turned...
LC-32D64U | LC-37D64U Operation Manual - Page 38
...the same as an input change key)
TV
I TVD0 _ _ _
It input-switches to TV. (A channel remains as it ...indicated in inside . 5: DYNAMIC(Fixed), 6: DYNAMIC, 7: PC, 8: xvYCC
VOLUME
V O L M * * _ _ Volume (0-60)
POSITION
H-POSITION H P O S * * * _ V-POSITION V P O S * * * _
The screen position variable ranges depend on the table.
36 POWER SETTING
1 _ _ _ ON P O W R 0 _ _ _ Power Off
The Power...
LC-32D64U | LC-37D64U Operation Manual - Page 39
...LC-32D64U
Model: LC-37D64U
LCD panel Resolution
32o screen size class Advanced Super View & BLACK TFT LCD (Diagonal Measurement : 31 35/64o)
2,073,600 pixels (1,920 g 1,080)
37o screen size class Advanced Super View & BLACK TFT LCD (Diagonal Measurement : 37o)
TV-standard (CCIR)
American TV...cation figures indicated are nominal values of continuous improvement, SHARP reserves the right ...
Similar Questions
Sharp Squid 32 Inch Tv Won't Stay On
My tv will not stay on if it gets turned off. I was holding down the power button a few times for ab...
My tv will not stay on if it gets turned off. I was holding down the power button a few times for ab...
(Posted by Anonymous-134713 10 years ago)
Is There A Universal Base For A 32' Lcd Tv That Is Not A Wall Mount?
I have a 32" sharp lcd tv but do not have the factory base. Is there a universal base? I do not want...
I have a 32" sharp lcd tv but do not have the factory base. Is there a universal base? I do not want...
(Posted by rndacole 12 years ago)
Lcd Tv -- Lamp
Does the sharp LC42SB45UT LCD TV contain a lamp?The Sharp warranty will not cover a tech to come out...
Does the sharp LC42SB45UT LCD TV contain a lamp?The Sharp warranty will not cover a tech to come out...
(Posted by kles 12 years ago)
Lc-32d62u - Interuptions In Sound
I have had the TV for 3-4 years. Yesterday I began having sound problems. The sound is interupted ev...
I have had the TV for 3-4 years. Yesterday I began having sound problems. The sound is interupted ev...
(Posted by eacock 13 years ago)