Get support for Pfaff hobby 1122

Pfaff hobby 1122 Support Question

Pfaff hobby 1122 Support Question

Find answers below for this question about Pfaff hobby 1122.
Need a Pfaff hobby 1122 manual? We have 1 online manual for this item!
Question posted by jjacpruefer on January 31st, 2016

Needle And Thread Issue

my thread in the needle keeps getting caught in the bobbin compartment

Current Answers

Answer #1: Posted by waelsaidani1 on January 31st, 2016 6:17 PM
This answer was accepted by the poster of the original question.
waelsaidani1

Member since:
May 12th, 2013

Points: 19,501,787
1,090
points
Please check here for causes of these problems: http://www.craftsy.com/blog/2014/01/sewing-machine-thread-bunching-up/

Related Pfaff hobby 1122 Manual Pages

Owner's Manual - Page 3

Parts of your hobby™ 1132/1122 sewing machine 1 Bobbin winder stop 2 Bobbin winder spindle 3 Hole for extra spool pin 4 Spool pin 5 Carrying handle 6 Bobbin thread guide 7 Take-up lever 8 Foot pressure dial (only at 1132) 9 Face plate 10 Thread cutter 11 Slide for lowering the feed dog 12 Needle plate 13 Accessory tray 14 Throat plate 15 Throat plate release...
Owner's Manual - Page 4

...often contain a lot of features and accessories for you to explore. Your hobby is a great way to learn the machine and also to make full use and offers a whole range of excess ... many enjoyable hours of the features. If you suspect that your sewing machine. This discoloring may be at your new PFAFF® hobby! Congratulations on your fabric/ready-to-wear garment contains a lot ...
Owner's Manual - Page 5

...or damaged, or dropped into any object into water. Special care is required around the Sewing machine needle. • Always use as threading needle, changing needle, threading bobbin, or changing presser foot, etc. • Always unplug the sewing machine from all moving parts. This houshold sewing machine is designed to comply with IEC/EN 60335-2-28 and UL1594 IMPORTANT SAFETY INSTRUCTIONS...
Owner's Manual - Page 6

Operate your hobby 1132/ 1122 Carrying handle, carrying case 1:2 Connecting the foot control 1:2 Foot preassure dial 1:3 Dropping the feed dog 1:3 Presser foot lifter 1:4 Changing the presser foot 1:4 Removing and attaching the foot holder 1:5 Changing the needle 1:5 Bobbin winding 1:6 Inserting the bobbin 1:8 Threading the machine 1:9 Threading for twin needle 1:10 ...
Owner's Manual - Page 9

... Screwdriver Part No. 4160234-01 Part No. 4160422-01 9 Brush 13 Bobbins Part No. 4160409-01 Part No. 4160233-01 10 Seam ripper 14 Needles Part No. 4160304-01 Part No. 4160471-01 9 10 7 8 11... to sew perfect piping Your ribbon is hold perfectly in place while you sew it onto your project For a better feed on material like vinyl plastic and leather Accessory tray Your sewing machine has ...
Owner's Manual - Page 10

...workwear For stretch seams requiring a left needle position For attaching elastic tape on elastic materials For sewing on elastic threads, overlocking towelling and for decorative hem ...materials, e.g. VI Introduction Stitch table hobby 1132 Stitch table hobby 1122 1132/1122 A Buttonhole B Straight stitch, needle position middle C Straight stitch, needle position left D Zigzag stitch E ...
Owner's Manual - Page 12

... to use. YC-190A Main switch When the main switch (B) is part of the basic equipment, protects your sewing machine from behind. 1:2 Operate your hobby 1132/1122 Carrying handle Lift up the carrying handle of the sewing machine from dust and damage while transporting. Carrying case The carrying case, which is turned on the carrying case...
Owner's Manual - Page 15

... or blunt needle. Hold the needle and tighten the needle screw Àrmly. A damaged needle can cause permanent snaps or runs in the presser bar. E F Operate your hobby 1132/1122 1:5 Removing and attaching the foot holder Turn off the main switch. To remove the foot holder Remove the thumbscrew (E) by turning it counterclockwise with the threaded hole...
Owner's Manual - Page 17

... and press the foot control. Operate your hobby 1132/1122 1:7 Thread through the hole in the bobbin (D) D from the second spool pin without unthreading the machine. Do not move the bobbin winder spindle while the machine is already threaded, you can only be wound when it will stop automatically. E Thread the machine for winding in the same way as shown...
Owner's Manual - Page 19

G F Operate your hobby 1132/1122 1:9 H F I ) from front to left over the take-up lever eye. Pull the thread from right to back through the needle eye. Pull the thread up lever (F) is in it's highest position. Firmly pull the thread from the spool and pass it down into the take -up around the bottom of the thread guide...
Owner's Manual - Page 20

.... Note: When changing the sewing direction, raise the needle and turn the fabric. Place a piece of the selected stitch. Thread the needles from the front to back. Set the stitch length at 1.5 mm or more for single needle sewing of felt and a spool on the right (E). 1:10 Operate your hobby 1132/1122 C D E Threading the twin needle Turn off the main...
Owner's Manual - Page 21

... the presser foot. Bring the bobbin thread (B) up the bobbin thread Turn off the main switch. Operate your hobby 1132/1122 1:11 Bringing up by pulling the needle thread (A) as shown in the picture. Raise the presser foot. Hold the needle thread and turn the handwheel towards you until the needle is at the top again and the bobbin thread has formed a loop.
Owner's Manual - Page 24

The machine sews in reverse. 1:14 Operate your hobby 1132/1122 Variable needle position (only at 1132) The needle drop position of the straight stitches can be moved between the center (5) and left (0) with the stitch width dial. Note: Do not turn the stitch width dial while the needle is in the fabric, otherwise the needle may bend or...
Owner's Manual - Page 25

... too high the threads are interlaced below the lower fabric. Tighten the needle thread tension by moving the dial to 5. The threads must be adjusted depending on the sewing materials, layers of fabric, as shown in the picture. Perfect tension Too high tension Too low tension Operate your hobby 1132/1122 1:15 Balancing needle thread tension The thread tension should...
Owner's Manual - Page 32

... instructions. These charts also provide you with further instructions that are necessary when sewing the selected stitches. 2:6 Utility stitches and practical sewing Explanation of the needle thread tension and recomended presser foot. The choice of the sewing foot, the setting of the sewing chart The following charts show the recommended settings for each stitch or technique.
Owner's Manual - Page 41

... four-hole buttons. Note: When sewing a four-hole button, move the button to check if the needle enters into both holes in the button. Cut the needle and bobbin threads leaving 20 cm (8") tails. Wind the threads to the right side of holes, and sew the button again. Pull the needle thread to pick bobbin thread up to form a shank and...
Owner's Manual - Page 46

... than as explained in this section. Remove the needle plate and take out the bobbin holder. • Lift up the bobbin holder (B) and remove it needs. A Clean the outside of the bobbin holder Àts next to clean your sewing machine, because it will reward you use the machine, the more often you with the screwdriver. Tighten...
Owner's Manual - Page 48

... is incorrectly inserted. Change the bobbin The needle breaks The needle is bent or blunt. The needle is too tight. The needle thread tension is incorrectly inserted, bent or blunt. The needle is not threaded properly. Page 1:5 Page 1:5 Page 2:3 Page 1:5 The machine skips stitches The needle thread is incorrectly inserted. The needle thread tension is damaged and does not...
Owner's Manual - Page 49

... off . The feed dog is not raised after bobbin winding. (Bobbin winding condition) The stitch density is not suitable for the fabric being sewn The machine is not returned to sew without fabric under the presser foot. Stabilizer is not used when sewing on the seams The needle thread tension is important if there are too À...
Owner's Manual - Page 52

If in accordance with relevant National legislation relating to electrical/electronic products. presser foot height Needle system 385 x 280 x 170 8 kg 230 V 120 V 240 V 75 W 15 W Max 800 stitches/minute 0...5 mm 0...4 mm 6 mm 13 mm 103 / 705 H Package contents Sewing machine Carrying case Foot control Accessories Owner's manual Please note that on disposal, this...

Similar Questions

I Have A Phaff 1122 And The Manual
No where in the manual does it help with the situation of the needle thread getting jammed in the bo...
(Posted by jjacpruefer 8 years ago)
Pfaff 259 Sewing Machine Won't Run With Foot Petal
I have a pfaff 259. When I push on the foot petal the motor runs but the machine itself doesn't run....
(Posted by Aemazing 8 years ago)
My Pfaff Hobby 1122 Sewing Machine Needle Does Not Pick Up Bobbin Thread And Thu
thus does not sew - what is the quick fix. Thanks a million for your quick reswponse.
(Posted by faridanizar 8 years ago)
Hobby 1032 Pfaff Sewing Machine Instructions
Can I order the instruction book for the Hobby 1032 Pfaff Sewing Machine Instructions ? If so, how m...
(Posted by raylindab 10 years ago)
Ask a New Question
Use the box below to post a new question about this Pfaff product .
Points & Prizes
  • You can earn points for nearly everything you do on HelpOwl.com
  • You can trade in those points for gift cards at leading retailers such as Amazon.com and Walmart
  • It's that simple!
See How it Works
Create a Free Account

Pfaff Manuals

Find free Pfaff hobby 1122 manuals and user guides available at ManualOwl.com. Try out our unique manual viewer allowing you to interact with manuals from directly within your browser!

Pfaff Reviews

View thousands of Pfaff user reviews and customer ratings available at ReviewOwl.com.

Contact Information

Complete Pfaff customer service contact information including steps to reach representatives, hours of operation, customer support links and more from ContactHelp.com.

Scoreboard Ratings

See detailed Pfaff customer service rankings, employee comments and much more from our sister site.