Pfaff hobby 1122 Support Question
Pfaff hobby 1122 Support Question
Find answers below for this question about Pfaff hobby 1122.Need a Pfaff hobby 1122 manual? We have 1 online manual for this item!
Question posted by dawntaylor on December 19th, 2015
How Do I Adjust Presser Foot Tension On Pfaff Hobby 1122
How do i adjust the presser foot tension on hobby 1122
Current Answers
Answer #1: Posted by waelsaidani1 on December 24th, 2015 3:49 PM
waelsaidani1
Member since:
May 12th, 2013 Points: 19,501,797
Member since:
May 12th, 2013 Points: 19,501,797
Foot pressure dial (only at 1132) Turn the foot pressure dial to adjust the
foot pressure. The foot pressure dial should be set at "III" for regular sewing.
Reduce the pressure to "II" for appliqué, cutwork, drawn work and basting.
Set the setting mark (C) at "I" when sewing chiffon, lace, organdy and other
fabrics. Dropping the feed dog For certain sewing work, e.g. darning the
feed dog has to be dropped. The slide for lowering the feed dog is
located underneath the free-arm bed on the backside of the machine.
To drop the feed dog, push the slide in the direction of the arrow, as shown in the picture (D).
To raise the feed dog, push the silde in
the direction of the arrow, as shown in
the picture (E), and turn the handwheel
toward you.
The feed dog must be up for regular
sewing.
Related Pfaff hobby 1122 Manual Pages
Owner's Manual - Page 3
Parts of your hobby™ 1132/1122 sewing machine
1 Bobbin winder stop 2 Bobbin winder spindle 3 Hole for extra spool pin 4 Spool pin 5 Carrying handle 6 Bobbin thread guide 7 Take-up lever 8 Foot pressure dial (only at... plate 15 Throat plate release button 16 Thumbscrew
17 Needle screw 18 Presser foot lifter 19 Thread tension dial 20 Reverse stitch lever 21 Power switch 22 Connecting socket 23...
Owner's Manual - Page 4
... to avoid the discoloring. Your Pfaff dealer will be very difÀcult or impossible to make full use and offers a whole range of sewing ! Fleece and denim fabric in especially red and blue often contain a lot of the features.
Your hobby is a great way to learn the machine and also to remove.
Some...
Owner's Manual - Page 5
... air openings blocked. This houshold sewing machine is designed to comply with the sewing machine.
• Use this sewing machine only for its intended use as threading needle, changing needle, threading bobbin, or changing presser foot, etc. • Always unplug the sewing machine from the electrical outlet when removing covers,
lubricating, or when making any adjustment in the needle area...
Owner's Manual - Page 6
Operate your hobby 1132/ 1122
Carrying handle, carrying case
1:2
Connecting the foot control
1:2
Foot preassure dial
1:3
Dropping the feed dog
1:3
Presser foot lifter
1:4
Changing the presser foot
1:4
Removing and attaching
the foot holder
1:5
Changing the needle
1:5
Bobbin winding
1:6
Inserting the bobbin
1:8
Threading the machine
1:9
Threading for twin needle
1:10
...
Owner's Manual - Page 9
... rows of pintucks, with or without cording
The foot has grooves to make it easier to sew perfect piping
Your ribbon is hold perfectly in place while you sew it onto your project
For a better feed on material like vinyl plastic and leather
Accessory tray
Your sewing machine has a removable accessory tray which is also...
Owner's Manual - Page 12
... of the sewing machine and to the connecting socket (A) of foot control:
For USA and Canada, 120V - The sewing machine is intended to use.
YC-190 For Australia, 240V - If the plug does not Àt fully in any way. To reduce the risk of the sewing machine from dust and damage while transporting. 1:2 Operate your hobby 1132/1122
Carrying...
Owner's Manual - Page 13
...
For certain sewing work and basting.
Reduce the pressure to be up for appliqué, cutwork, drawn work , e.g.
To raise the feed dog, push the silde in the direction of the machine.
Set the...The slide for regular sewing.
The feed dog must be dropped. Operate your hobby 1132/1122 1:3
Foot pressure dial (only at 1132)
C
Turn the foot pressure dial to adjust the
foot pressure.
Owner's Manual - Page 14
1:4 Operate your hobby 1132/1122 Presser foot lifter The presser foot is properly engaged by turning the handwheel. A Lowered position B Normal up position for easy removal of the foot holder.
Raise the presser foot, and press the red button on the back of the presser foot, or to its highest position by raising the presser foot lifter. Removing the presser foot Raise the needle to help...
Owner's Manual - Page 15
...points.
E F
Operate your hobby 1132/1122 1:5
Removing and attaching the foot holder
Turn off the main switch. To attach the foot holder Match the hole in the foot holder with the threaded hole ...To remove the foot holder Remove the thumbscrew (E) by turning it counterclockwise with a screwdriver.
Never use a bent or blunt needle.
To remove the needle Lower the presser foot and move the...
Owner's Manual - Page 19
Raise the presser foot and turn the handwheel towards you until the take-up around the bottom of the thread guide plate (H). Pull the thread up lever (F) is in it's highest position.
Pull the thread down into the take -up lever eye.
G F
Operate your hobby 1132/1122 1:9
H F
I ) from the left.
Thread the needle from the...
Owner's Manual - Page 21
... top again and the bobbin thread has formed a loop. A B
Pull 10 cm (4") of both threads back and under the presser foot. Raise the presser foot.
Bring the bobbin thread (B) up the bobbin thread
Turn off the main switch. Operate your hobby 1132/1122 1:11 Bringing up by pulling the needle thread (A) as shown in the picture.
Owner's Manual - Page 28
.... Changing the sewing direction Stop the machine and turn the handwheel toward the back. Pivot the fabric around the needle to sew Raise the presser foot and place the fabric under the foot. Depress the foot control.
Lower the presser foot and continue sewing in reverse, then sew forward.
2:2 Utility stitches and practical sewing
Basic sewing Starting to change sewing direction as...
Owner's Manual - Page 32
... charts also provide you with further instructions that are necessary when sewing the selected stitches. Always use the "center" needle position if not otherwise speciÀed in mm
Thread tension
Recommended presser foot
The choice of the sewing foot, the setting of the sewing chart The following charts show the recommended settings for each stitch or...
Owner's Manual - Page 33
... stitch width dial. (5 is center, 0 is easier to do some sewing jobs by changing the needle position, e.g. The stitch length can be increased...sewing 2:7
stitch
B/C 0/5 1.5-4 2-6
A
Straight stitch
Straight stitch B/C is at a thick seam, we recommend supporting the presser foot on the needle plate. Note: To ensure a consistent feed when beginning sewing at its highest position when adjusting...
Owner's Manual - Page 34
...materials.
Overcasting
In addition to prevent puckering. Carefully guide the fabric while sewing as backpacks for extra strength. Also use it when constructing items such...
This stitch is used for sewing all seams where great strength is widely used for overcasting, sewing on buttons etc.
Lower the presser foot and sew while guiding the fabric carefully. Adjust the stitch length to the ...
Owner's Manual - Page 41
... the threads to the right side of the foot. Adjust the stitch width to check if the needle enters into both holes in the button. A pin can sew on buttons.
Bring the needle thread between the...to match it with the slot of the fabric.
Note: Raise the feed dog after sewing. Raise the presser foot and remove the fabric.
Make sure to the other pair of the holes in the button...
Owner's Manual - Page 46
.... A
Clean the outside of the bobbin holder Àts next to clean your sewing machine, because it will reward you use the machine, the more often you with a longer service life.
A E
B
D C
...knob (C) of the machine with the brush. Tighten the screw (A) Àrmly with a soft, dry cloth.
Wipe the hook race with the screwdriver. Removal • Remove the presser foot and needle.
•...
Owner's Manual - Page 48
... not pulled to the rear after sewing.
Change the bobbin
The needle breaks The needle is incorrectly inserted. Page 1:5 Page 1:5 Page 2:3 Page 1:5
The machine skips stitches The needle thread is ...under the presser foot when start sewing. Page 1:9 Page 1:15 Page 1:5 Page 1:5 Page 2:2
Page 2:3
The bobbin thread breaks
The bobbin thread is bent or blunt. The needle thread tension is ...
Owner's Manual - Page 49
...adjusted properly.
Layer slippage Foot pressure is not used when sewing on the seams The needle thread tension is packed with lint.
When leaving the machine, even for the fabric being sewn
The machine... is not sewn neatly The stitch density is not returned to sew without fabric under the presser foot.
Maintenance and trouble-shooting 3:5
The cloth is not fed smoothly...
Owner's Manual - Page 52
... (USA/Canada) Nominal voltage (Australia) Power consumption Sewing lamp Sewing speed Stitching width Stitching length Presser foot lift Max. presser foot height Needle system
385 x 280 x 170 8 kg 230 V 120 V 240 V 75 W 15 W Max 800 stitches/minute 0...5 mm 0...4 mm 6 mm 13 mm 103 / 705 H
Package contents
Sewing machine Carrying case Foot control Accessories Owner's manual
Please note that on...
Similar Questions
The Presser Foot Tension Plate Not Fitted
how do I fit the presser foot tension plate to the machine
how do I fit the presser foot tension plate to the machine
(Posted by raijasinikka 1 year ago)
Needle And Thread Issue
my thread in the needle keeps getting caught in the bobbin compartment
my thread in the needle keeps getting caught in the bobbin compartment
(Posted by jjacpruefer 8 years ago)
My Pfaff Hobby 1122 Sewing Machine Needle Does Not Pick Up Bobbin Thread And Thu
thus does not sew - what is the quick fix. Thanks a million for your quick reswponse.
thus does not sew - what is the quick fix. Thanks a million for your quick reswponse.
(Posted by faridanizar 8 years ago)
The Presser Foot On My Pfaff Creative 7550 Sewing Machine No Longer Drops Down.
When presser foot lever is disengaged presser foot does not drop
When presser foot lever is disengaged presser foot does not drop
(Posted by lkjorstad 11 years ago)