Lowrance Elite-4x Support Question
Lowrance Elite-4x Support Question
Find answers below for this question about Lowrance Elite-4x.Need a Lowrance Elite-4x manual? We have 1 online manual for this item!
Question posted by jingojop on September 26th, 2021
No Display, Only Elite Liwrance
The person who posted this question about this Lowrance product did not include a detailed explanation. Please use the "Request More Information" button to the right if more details would help you to answer this question.
Current Answers
Answer #1: Posted by SonuKumar on September 27th, 2021 1:04 AM
SonuKumar
Member since:
May 9th, 2021 Points: 16,620,300
Member since:
May 9th, 2021 Points: 16,620,300
Why is my Lowrance screen black?
If your display turns on, shows the blue Lowrance screen, and then goes completely dark, most likely you have accidentally shut your back light off while powering off your unit.
https://www.lowrance.com/help-and-support/?guideTitle=Display-Problems&guideId=003-043
Software upgrade (version 20.3) that enables ActiveTargetT82; Live Sonar compatibility for HDS LIVE, HDS Carbon and Elite FS is now available
Please respond to my effort to provide you with the best possible solution by using the "Acceptable Solution" and/or the "Helpful" buttons when the answer has proven to be helpful.
Regards,
Sonu
Your search handyman for all e-support needs!!
Related Lowrance Elite-4x Manual Pages
Operation Manual - Page 8
... Clarity (manual control)
• Ping Rate (manual control)
• Units (Enables distance, speed, depth and temperature options)
Cursor
The keypad moves the cursor on the display and allows you to clear the cursor.
6 slightly lower chart speed
Bottom brown/white background; 50% ping speed
Bottom brown/blue background;
Operation Manual - Page 9
Press any key to access the Backlight menu.
NOTE: Leaving your unit in Standby mode when your boat is not is use will run down your battery. Select Standby and press Enter.
Standby mode
Lowers power consumption by turning off sonar and the display. Press the PWR/Light key to resume normal operation. Restore defaults
Resets unit options and settings to defaults.
7
Basic Operation
Operation Manual - Page 10
left on the display.
about to the Mark 5X.)
8 On the right side of the ter coverage, while 200 kHz has the ...arches
Location and depth
Range Scale
Cursor Depth
Frequency
Sonar Page
Amplitude Scope
Split Frequency page
Split Frequency
Displays both transducer frequencies at the same
Displays the water column moving from right to time. 83 kHz has a wider cone angle for greater wa-
Operation Manual - Page 11
...
Allows you to remove overlay data from the screen without losing your view of overlay data, allowing you to be displayed on the sonar page. Show
Overlay data
Enables/disables the display of the water column. Configure
Used to select overlay data to zoom in for a closer look without deleting the selected...
Operation Manual - Page 12
... press enter.
4. Press Menu and select Add. Press Enter.
6. Press Menu and select Return to the size and/or location of overlay data on the display. Customizing Overlay Data
Access the Overlay Data configuration menu to make adjustments to overlays.
7. Press Menu, select Done Configuring and press Enter.
Press Menu from...
Operation Manual - Page 13
... the way to the right to resume normal sonar scrolling.
Sonar Menu
The sonar menu has options and settings that affect the appearance of the display.
11 Press Menu and select Exit cursor mode to move in reverse. Using your recent sonar history by moving the cursor to the left until...
Operation Manual - Page 14
...menu. Too much detail will be a narrow reddishblue area.
12 A hard return will be displayed. Sensitivity set to 85 percent. Sensitivity set to distinguish fish or structure from weak sonar echoes....Separates strong sonar echoes from the bottom. Sensitivity
Controls the level of detail shown on the display.
That makes it easier for you to 65 percent.
If Sensitivity is set too low,...
Operation Manual - Page 15
...that does not include the water surface. Auto Sensitivity is turned on the display. Auto Sensitivity Keeps sensitivity at least 6.5 ft (2m) apart.
Depth Range
Selects the deepest...any digital depth readings, or you select too shallow a depth range the unit will have a monochrome display, so wide bands of the water column. NOTE: You can make significant adjustments.
Upper and Lower ...
Operation Manual - Page 16
...kHz offers a wider cone angle for more water coverage.
Sonar Options
Accesses sonar display settings and configuration options. Ping speed adjustments can help reduce interference from full ...5X only supports the 200kHz transducer frequency. Split Zoom and Split Flasher
Switches the sonar display from other transducers.
This unit supports two frequencies: 200kHz and 83kHz. Ping Speed ...
Operation Manual - Page 17
...Sonar
Color
Fish ID
Allow you to get a closer look of the display using palettes with varying degrees of sonar settings optimized for ice fishing and also overlays battery meter ...and suspended debris may be used to prevent/stop interference between two units running on the display.
Amplitude Scope
Displays the amplitude of fish arches. Stop Sonar also can be shown as fish symbols instead...
Operation Manual - Page 18
Sonar
Overlay Data Allows you to select data (water temperature, depth, etc) to be displayed on top of the Sonar screen. Overlay data setup is covered Overlay data in the Pages section. Settings Accesses the Sonar settings menu.
16
Operation Manual - Page 19
Settings menu
System menu
Enables advanced features and settings
Displays software information
17
Settings
Settings Menu
Accesses to installation and configuration settings for your unit. System
Adjusts unit settings like language, mute audio and advanced mode.
Operation Manual - Page 20
... only available with unit in Advanced Mode. Settings
Set Language Selects the language used on /off unit audio, like key beeps, alarm sounds, etc. About
Displays software information about this unit. Restore Defaults
Switches the unit back to default settings.
18
Operation Manual - Page 21
... reduces surface clutter by decreasing the sensitivity of transducer range.
19 That allows the display scroll smoothly if the bottom depth is out of the receiver near the surface. Surface... the effects noise (boat pumps, water conditions, engine ignition systems, etc.) has on your display, and then filters out the undesired signals. Noise Rejection
Uses advanced signal processing to the selected...
Operation Manual - Page 25
..., Mark 5x & Mark 5x Pro
General
Case size
5.4" H (134mm) x 6.8" W (174mm); 6" H (152mm) with bracket
Display
Mark: (5" diagonal) High-contrast film Supertwist LCD; 16-level grayscale definition; 480x480 monochrome
Elite: (5" diagonal) Enhanced Solar MAX™ 480x480 color
Backlight
Mark: White LED
Elite: Cold cathode fluorewscent lamp (10 levels)
Power
Transmit power
Mark 5x: 1600W PTP...
Operation Manual - Page 26
Specifications
Case size
Display Backlight
Transmit power Power requirement Voltage input Current drain Fuse type
Elite 4x General 5.6" H (144mm) x 3.7" W (94.3mm); 6.4" H (164mm) with bracket (3.5" diagonal) 320x240 (256 color) TFT LCD White LED (10 levels) Power
2100W PTP; 262W RMS
12V
10 to ...
Operation Manual - Page 27
... the Factory Customer Service Department. To locate a dealer near you purchased your telephone directory for listings. 2) U.S. To order Lowrance accessories, please contact: 1) Your local marine dealer or consumer electronics store. Mississauga, Ontario L4W2R7 or fax 905-629-3118. Call toll-free: 800-324-1356
8 a.m. Eastern Standard Time, M-F
...outside Canada and the USA...
Similar Questions
Can't Get The Depth To Move From 60ft?
can't get the depth finder to change from 60ft. Temp works though
can't get the depth finder to change from 60ft. Temp works though
(Posted by toddpugesek 10 months ago)
Se Me Perdio El Conector De La Zonda
se me perdio el contector del trasductor y voltage de el lowrance Elite-4x.. se consigue o bien quie...
se me perdio el contector del trasductor y voltage de el lowrance Elite-4x.. se consigue o bien quie...
(Posted by casanovas2005 1 year ago)
Lowrance Elite- 4x
Hello, how is the Lowrance Elite-4x pinout? Which color cable will be connected to which pin? I will...
Hello, how is the Lowrance Elite-4x pinout? Which color cable will be connected to which pin? I will...
(Posted by ayhanmonus 2 years ago)
How Do I Turn On The Downscan Imagine On My Lowrance Elite 4x Hsi
(Posted by Macook 3 years ago)
Elite 4 X Interference
after having my hanset upgraded to 2.4ghz, my lowrance elite 4x seems to lose its signal randomly wh...
after having my hanset upgraded to 2.4ghz, my lowrance elite 4x seems to lose its signal randomly wh...
(Posted by Pcarr29 9 years ago)