Husqvarna LGT2654 Support Question
Husqvarna LGT2654 Support Question
Find answers below for this question about Husqvarna LGT2654.Need a Husqvarna LGT2654 manual? We have 2 online manuals for this item!
Question posted by richardsteinacker1 on May 2nd, 2017
Lgt 2654 Turns Over, Fuel Pump Works, Runs If Gas Sprayed In Carb
Bought a used LGT 2645, it ran great until I lifted the front of the tractor high in the air to change the blades, now it won't start, pumping gas good and it will run if gas is sprayed directly into carb. Is there a safety switch that shuts the fuel down if the tractor detects to much of an angl
Current Answers
Answer #1: Posted by BusterDoogen on May 2nd, 2017 4:38 PM
BusterDoogen
Member since:
October 30th, 2011 Points: 28,565,407
Member since:
October 30th, 2011 Points: 28,565,407
Go to page 2 for the schematic showing the PTO(power take-off switch.
I hope this is helpful to you!
Please respond to my effort to provide you with the best possible solution by using the "Acceptable Solution" and/or the "Helpful" buttons when the answer has proven to be helpful. Please feel free to submit further info for your question, if a solution was not provided. I appreciate the opportunity to serve you!
Related Husqvarna LGT2654 Manual Pages
Owners Manual - Page 2
...safety devices in the manual before turning.
• Never leave a running machine unattended. Do not allow responsible adults, who are a major factor related to loss of your tractor. SLOPE OPERATION
Slopes are familiar with specifications of the manufacturer of your tractor. If the tires lose traction, disengage the blades...Do not make sudden changes in .
2 Use common sense when towing...
Owners Manual - Page 3
... and while backing, look down slowly. Clean oil or fuel spillage and remove any adjustments or repairs with the engine running . If the tires lose traction, disengage the blades and proceed slowly straight down for
towing. Replace gas cap and tighten securely.
Avoid starting, stopping, or turning on the slope.
Never carry children, even with safe...
Owners Manual - Page 7
... 5)
HW X
ZY
H. TURN STEERING WHEEL LEFT AND POSITION MOWER (See Fig. 6)
• Turn steering wheel to the left rear tire in front of transaxle. SLIDE MOWER UNDER TRACTOR (See Fig. 8) •...mower under tractor. • Slide mower under tractor until it will go and position mower on right side of anti-sway bar (S) into hole in
all mower pulley grooves. Q
A
A. ASSEMBLY
LIFT LEVER
Fig...
Owners Manual - Page 9
...BLADE DRIVE BELT " in the Operation section of this manual. CHECK TIRE PRESSURE
The tires on rod and engage slowly.
• Raise attachment lift to highest position. • If necessary, adjust gauge wheels before operating your tractor...
After you start the engine....USE YOUR TRACTOR, PAY EXTRA ATTENTION TO THE FOLLOWING IMPORTANT ITEMS:
✓ Engine oil is at proper level. ✓ Fuel...
Owners Manual - Page 11
...M
Fig. 16
Our tractors conform to the applicable safety standards of the tractor.
(M) FREEWHEEL CONTROL - Allows operation of various controls and adjustments. Selects the speed and direction of the American National Standards Institute.
(A) ATTACHMENT LIFT LEVER - Used for braking the tractor and starting and controlling engine speed.
(E) ATTACHMENT CLUTCH SWITCH - Used for pushing or...
Owners Manual - Page 12
..., before leaving the operator's position. Always wear safety glasses or eye shields while operating your tractor or performing any tractor can result in foreign objects thrown into the eyes...USE YOUR TRACTOR
TO SET PARKING BRAKE(See Fig. 17)
Your tractor is running , hot engine exhaust gases may cause engine to "backfire".
• Turn ignition key (F) to stop engine when stopping tractor...
Owners Manual - Page 13
...direction and speed of movement is approximately 1" to 4". TO ADJUST MOWER CUTTING HEIGHT (See Fig. 21)
The position of grass being mowed. • The average lawn...blade tip with the engine running . Fig. 22
TO OPERATE MOWER
Your tractor is at the desired cutting height in desired height of cut with attachment lift lever. • Start mower blades... high; A
Fig. 21 • Put attachment lift ...
Owners Manual - Page 14
...start movement.
• When use if you to disengage transmission by and comply with attachment
lift control. • Pull freewheel control out and down and behind before starting ...tractor is not running , turn the ignition key clockwise to neutral position. Use common sense when towing.
SERVICE REMINDER/HOUR METER
Service reminder shows the total number of your tractor.
Turning...
Owners Manual - Page 15
...;C), USE FRESH, CLEAN WINTER GRADE GASOLINE TO HELP ENSURE GOOD COLD WEATHER STARTING.
NOTE: Before starting, read oil level. Release the parking brake and let the clutch/brake slowly return to choke position.
Acidic gas can damage the fuel system of this manual.) • To change oil for easier starting procedures below.
• Insert key into ignition and turn...
Owners Manual - Page 16
...direction making left hand side of your tractor. After the engine is running, move motion control lever to reverse position. MOWING TIPS
• Tire chains cannot be used when the mower housing is attached to tractor...manual.
• The left hand turns until finished (See Fig. 26). With motion control lever in the tractor seat, start by placing freewheel control in freewheeling ...
Owners Manual - Page 17
... assure proper air-fuel mixture and help your tractor. Change more often when operating in high ambient temperatures. 2 - See Cleaning in sandy soil. 4 -
LUBRICANTS WILL ATTRACT DUST AND DIRT THAT WILL
SHORTEN THE LIFE OF THE SELF-LUBRICATING BEARINGS. IF YOU FEEL THEY MUST BE LUBRICATED, USE ONLY A DRY,
POWDERED GRAPHITE TYPE LUBRICANT SPARINGLY.
17
VISCOUS...
Owners Manual - Page 18
.... 27)
Be sure operator presence and reverse operation systems are working properly.
CHECK REVERSE OPERATION (ROS) SYSTEM
• When the engine is running with heavy cloth.
• Remove blade bolt by the manufacturer of your tractor.
NOTE: Protect your hands with gloves and/or wrap blade with the ignition switch in the engine "ON" position...
Owners Manual - Page 19
... cap on dipstick.
TRANSAXLE PUMP FLUID
The transaxle was sealed at the factory and fluid maintenance is in a suitable container.
ENGINE
TO CHANGE ENGINE OIL (See Fig. 29 & 30)
Determine temperature range expected before starting in cold weather, they begin to slip from running or while the transmission is not used more freely when warm...
Owners Manual - Page 20
MAINTENANCE
AIR FILTER
Your engine will not run properly using a garden hose or pressure washer to clean your tractor.
MUFFLER
Inspect and replace corroded muffler and spark...cooling fins, and/or cooling shrouds removed will shorten the useful life of operation, whichever occurs first. IN-LINE FUEL FILTER (See Fig. 31)
The fuel filter should be kept free of the engine are reinstalled...
Owners Manual - Page 27
...Do not empty the gas tank and carburetor if using fuel stabilizer. nance section of oil through spark plug hole(s) into
cylinder(s). • Turn ignition key to "START" position for a few...use plastic. WARNING: Never store the tractor with a suitable protective cover that all rusted or chipped paint surfaces; TRACTOR
Remove mower from tractor for storage, do not store battery directly...
Owners Manual - Page 28
...10. Clean and regap or change oil.
6. Connect and tighten spark plug wire.
11. Clean/replace muffler.
13. Replace blade. CORRECTION
1. Fill fuel tank. 2. Empty fuel tank and carburetor, refill tank with fresh, clean gas. 6.
Weak or dead battery. 4. Recharge or replace battery. 4. Replace fuel filter. 5. Engine will not start
CAUSE 1. Depress brake pedal. 2. Clean...
Owners Manual - Page 29
.... Improper blades used.
10. Purge transmission.
5. Faulty operator-safety presence control system. Faulty light switch. 4. If not corrected, contact an authorized service center/ department. Worn/damaged mower drive belt. 3. Replace mower drive belt. 3. Bad battery cell(s). 2. Faulty alternator.
1. Replace fuse. See "CLEANING" in "disengaged" position. 2. Turn ignition key...
Owners Manual - Page 32
..., blades, ...safety devices; (m) Any removed/damaged air filter, excessive dirt, abrasives, salt water, moisture, corrosion, rust, varnish, stale fuel, or any starting fluids; (i) Pressure cleaning or steam cleaning the product; (j) Use...(p) Sprayers pumping or spraying caustic or...running engines above specified and recommended engine speeds as prescribed in your product is approved; (h) Use...
Parts Manual - Page 3
LGT2654 (96045004000), PRODUCT NO. 960 45 00-40
SCHEMATIC
SCH12
A
AMMETER (OPTIONAL)
...POSITION CIRCUIT "MAKE"
OFF
M+G+A1
RUN/OVERRIDE B+A1
RUN
B+A1
START B + S + A1
L+A2
BLACK
IGNITION UNIT
(OPTIONAL)
SPARK PLUGS GAP (2 PLUGS ON TWIN CYL. ENGINES)
BLUE
HOUR
METER
BLACK
FUEL
BLUE
LINE
BLUE
FUEL SHUT-OFF SOLENOID
(IF EQUIPPED)
... CONNECTIONS
REMOVABLE CONNECTIONS TRACTOR -
Parts Manual - Page 11
...LGT2654 (96045004000), PRODUCT NO. 960 45 00-40
ENGINE
KEY PART NO. This difference is affected by, among other things, ambient operating conditions and engine-to-engine variability. Due to , accessories (air cleaner, exhaust, charging, cooling, carburetor, fuel pump... power when used in a given piece of higher rated power for individual gas engine models is labeled in U.S. TRACTOR -
Similar Questions
Husqvarna Lgt2654 Riding Mower
what would cause the mower to shut down when the pto is engaged? have already replaced the pto and a...
what would cause the mower to shut down when the pto is engaged? have already replaced the pto and a...
(Posted by markw1960 2 years ago)
On My Husky 24 I Drove Into Barn And Shut It Down It Want Star Now With Key
I know the seat switch is working and blade switch when I push clutch-brake I don't know how to find...
I know the seat switch is working and blade switch when I push clutch-brake I don't know how to find...
(Posted by cjc6875 2 years ago)
Wheel Weights
what wheel weights do I use for the lgt 2654 960450047
what wheel weights do I use for the lgt 2654 960450047
(Posted by jimmcdo48 8 years ago)
Deck Belt/ Pulling System
I just purchased the LGT 2654 in April 2015, with less than 50 hours on it, (brand new from Lowes fo...
I just purchased the LGT 2654 in April 2015, with less than 50 hours on it, (brand new from Lowes fo...
(Posted by kristinepayne 8 years ago)
Safety Switch On Yt42xls
My new Husqvarna YT42XLS won't start, where is the safety switch on the mower.
My new Husqvarna YT42XLS won't start, where is the safety switch on the mower.
(Posted by sh065 10 years ago)