Hunter 28679 Support Question
Hunter 28679 Support Question
Find answers below for this question about Hunter 28679.Need a Hunter 28679 manual? We have 4 online manuals for this item!
Question posted by Cindydoskey on February 12th, 2013
Not Enough Light
isImani's there a might kit with more wattage
Current Answers
Related Hunter 28679 Manual Pages
Installation Guide - Page 1
... the joist or support brace.
4-3. o e bottom of the fan and light kit.
If the joist is secured to building structure. Check the support brace to ensure it is...x 1-1/2" wood screws and washers. e bottom of the outlet box must be recessed a minimum of the fan and light kit. If you to recess the bottom of the outlet box a minimum of 1/16" into the ceiling.
3-2. ...
Owner's Manual - Page 1
Date Purchased
Where Purchased
Type 2 Models
Owner's Guide and Installation Manual
English
Español
Form# 42439-01 20100615 ©2010 Hunter Fan Co.
Model Name
Model No. For Your Records and Warranty Assistance For reference, also attach your receipt or a copy of your receipt to the manual.
Owner's Manual - Page 2
...; Installing the Ceiling Plate 7 3 • Assembling and Hanging the Fan . . . 8 4 • Wiring the Fan 9 5 • Installing the Canopy and Canopy
Trim Ring 10 6 • Assembling the Blades 11 7 • Completing Your Installation With
a Bowl Light Fixture 12 8 • Operating and Cleaning Your
Ceiling Fan 14 9 • Troubleshooting 15
Cautions and Warnings
• READ THIS...
Owner's Manual - Page 3
... the outlet box and the full weight of the fan and light kit.
Ceiling Hole
• e outlet box clearance hole is at least 8 feet high.
• e fan blades have no obstructions to building structure.
• Fan support system will hold full weight of the fan.
30" From Wall or Nearest Obstruction
7' Minimum Blades to...
Owner's Manual - Page 4
... are turned off position, securely fasten a prominent warning device, such as follows:
3-1. You have now successfully prepared your fan manual and continue with two #8 x 1-1/2" Step 4 wood screws and washers. e bottom of the fan and light kit. If you to install the support brace and outlet box.
Attach a 2" x 4" support brace between two joists. Steps...
Owner's Manual - Page 5
... quiet and optimum performance of three ways, depending on ceiling height and your Hunter fan, use the accessories, follow the instructions included with each product.
Understanding Mounting and ... Choice®
Hunter's patented 3-position mounting system provides you can install your Hunter fan in this manual include instructions for ceilings less than 8 feet, you maximum installation...
Owner's Manual - Page 6
...; Standard screwdriver (magnetic tip recommended) • Phillips-head screwdriver (magnetic tip recommended) • Wrench or pliers • Ladder (height dependent upon installation site)
Checking Your Fan Parts
Carefully unpack your Hunter dealer or call Hunter Technical Support Department at 888-830-1326 (In Canada, call 1-866-268-1936). Check for safety...
Owner's Manual - Page 7
...the ceiling plate so that the two tabs are pointing toward the ceiling peak.
2-2. Your fan comes with the pilot holes you drilled. For proper alignment use lubricants on each other. do... Plate
3" Wood Screw
Steps 2-3 - 2-6
7 42439-01 • 06/15/10 • Hunter Fan Company Note: The isolators should be flush against the ceiling. 2-6. Flat Washer
Toward Ceiling Peak
For Angled ...
Owner's Manual - Page 8
... the holes in the canopy with the lip down. 3-6. 3 • Assembling and Hanging the Fan
WARNING: Fan may fall if not assembled as directed in the ball. 3-3. Insert the downrod through the downrod on...the setscrew with three low profile screws. Assemble securely with a wrench or pliers. Raise the fan and align the slots in the washer with the
low profile washer. 3-4. For Standard or Angled...
Owner's Manual - Page 9
... wire (grounding) from the ceiling plate and the green ground wire from the fan. 4-4. 4 • Wiring the Fan
All wiring must be in accordance with national and local electrical codes. 4-1. Select...) from the ceiling to the black (ungrounded) and the black/white wire (ungrounded) from the fan. 4-5. To connect the wires, hold the bare metal leads together and place
a wire connector over...
Owner's Manual - Page 10
...canopy screws.
5-5. The canopy trim ring will flex out releasing the canopy trim ring. Swing the fan up to align the canopy screw holes with the screw holes aligned, partially install two canopy screws... steps.
5-1. Note: It is secure in the canopy must be aligned.
5-2. Note: Your fan may have multiple tabs and grooves that the tabs in the canopy are properly aligned, securely tighten...
Owner's Manual - Page 11
...turning them
counterclockwise. CAUTION: Be sure blade is locked into place. Note: The blades on this fan have been treated with a protective cloth to lock the blades
in the blade with the blade iron... iron posts; Carefully remove the blade.
11 42439-01 • 06/15/10 • Hunter Fan Company
Step 6-1 Step 6-2 Once they will feel
it lock into place and that leave any other cleaners...
Owner's Manual - Page 12
... third housing assembly screw. 7-5. Steps 7-1 - 7-2
Housing Assembly Screw
7-4. Exceeding the wattage limit marked on the upper switch housing.
Notch
Note: In compliance with this ceiling fan contains a device that restricts its light output. 7 • Completing Your Installation With a Bowl Light Fixture
Upper Switch Housing
Plug Connector
Housing Assembly Screw
WARNING...
Owner's Manual - Page 13
... chain through the finial and screw the finial onto the threaded rod end until tight. 7-11. Attach the extra pull chains (included) to the light and fan pull chains using the plastic breakaway connector. (You may find the plastic breakaway connector on the end of the cover plate. 7-9. Install candelabra bulbs (60...
Owner's Manual - Page 14
... into the connector.
8-3. A vacuum cleaner brush nozzle can remove heavier
dust.
Restart fan.
Turn on the fan to attract dust and dirt. You may use a furniture polish or any other cleaners...lint-free cloth to the fan.
8-2. The chain has two settings: ON and OFF.
8-4. To Change Airflow Direction Turn the fan off and let it come to the light fixture. Slide the reversing...
Owner's Manual - Page 15
... the shipping bumpers. If your fan wobbles when operating, use the enclosed balancing kit and instructions to the wiring the fan section. 3. CFL light bulbs are installed meet the specifications on the MAX wattage sticker affixed to ensure it is cracked. Loosen canopy, check all connections according to balance the fan. 2. Check the plug connection in...
Parts Guide - Page 1
... Pendant Pull Chain Pendant Pull Chain Pull Chain Cap, Finial Finial Globe/Shade Light bulb / Bulb Balancing Kit
Model #
28679
Asm. If parts are included in the box.
THIS PARTS GUIDE IS FOR...
84743-05
84886-13
2
77646-04
77646-04
77646-04
1
65666-01
65666-01
65666-01
Hunter Fan Company • 7130 Goodlett Farms Pkwy. #400 • Memphis, TN 38016 • www.hunterfan.com...
Similar Questions
The Fan Was Working Fine I Turned Off Went Back Later Try To Turn On Nothing Wor
no light no fan.
no light no fan.
(Posted by dquintana1953 5 years ago)
Light Kit For 28680 Fan.
Do you have to use a bowl light kit or can you install a 3 light kit?
Do you have to use a bowl light kit or can you install a 3 light kit?
(Posted by tayna99159 7 years ago)
How Do I Install My Fan Without The Light Kit?
how do I install my fan without the light kit
how do I install my fan without the light kit
(Posted by Mgdel634 7 years ago)
Light Switch For 28679
Where to you order light switch assembly
Where to you order light switch assembly
(Posted by stevecarrico55 10 years ago)
Need Hunter Part No. 98378.01, Light Kit Assembly, For Ceiling Fan Model 28679
Hunter says they do not make this model any longer and that they do not have part. Can you help me f...
Hunter says they do not make this model any longer and that they do not have part. Can you help me f...
(Posted by larrypricesimmons 10 years ago)