Hunter 28676 Support Question
Hunter 28676 Support Question
Find answers below for this question about Hunter 28676.Need a Hunter 28676 manual? We have 4 online manuals for this item!
Question posted by howarddesimone on May 25th, 2018
Light Lit
My fan works but the light doesn't. Tried switching out the light pull switch but that didn't work. Any other suggestions? Where can I purchase new light kit?
Current Answers
Answer #1: Posted by Odin on May 25th, 2018 5:57 PM
Odin
Member since:
April 10th, 2010 Points: 41,236,670
Member since:
April 10th, 2010 Points: 41,236,670
Possible solutions:
1. Check to make sure the wattage and type of the light bulbs that are installed meet the specifications on thelight socket.
2. Turn the power to the fan off at the wall switch. Wait 5 minutes, then resume power to the fan.
If the problem persists (or if you require further explanation), you'll have to consult Hunter. Use the contact information here--https://www.contacthelp.com/hunter/customer-service.
1. Check to make sure the wattage and type of the light bulbs that are installed meet the specifications on thelight socket.
2. Turn the power to the fan off at the wall switch. Wait 5 minutes, then resume power to the fan.
If the problem persists (or if you require further explanation), you'll have to consult Hunter. Use the contact information here--https://www.contacthelp.com/hunter/customer-service.
Hope this is useful. Please don't forget to click the Accept This Answer button if you do accept it. My aim is to provide reliable helpful answers, not just a lot of them. See https://www.helpowl.com/profile/Odin.
Related Hunter 28676 Manual Pages
Installation Guide - Page 1
... wall switch location are turned off every item, prepare a new fan site as follows:
3-1. Make sure the circuit breakers to the service panel.
5-2. read the fan supply line through the inner holes of 1/16" into the ceiling. If you to install the support brace and outlet box. o e outer holes of the fan and light kit. Fan...
Owner's Manual - Page 1
Model Name
Model No. Date Purchased
Where Purchased
Type 2 Models
Owner's Guide and Installation Manual
English
Español
Form# 42437-01 20100608 ©2010 Hunter Fan Co.
For Your Records and Warranty Assistance For reference, also attach your receipt or a copy of your receipt to the manual.
Owner's Manual - Page 2
... wall switch location. Never insert foreign objects between rotating fan blades. • To reduce the risk of our work. If you complete instructions for your fan. Table Of Contents
Preparing the Fan Site ... With a
Multi Staked Light Fixture 12 8 • Operating and Cleaning Your Ceiling
Fan 14 9 • Troubleshooting 15
Welcome
Your new Hunter® ceiling fan is an addition to ...
Owner's Manual - Page 3
... building structure are aligned with joist or support brace.
• e bottom of the fan and light kit. If your new Hunter fan.
Fan Support System
Fan Support System
Suitable Existing Fan Site
Wiring
Outlet Box
3 42437-01 • 06/08/10 • Hunter Fan Company
Outlet Box
• e outlet box is an UL-approved octagonal 4" x 1-1/2" outlet box...
Owner's Manual - Page 4
... line leads and associated wall switch location are unfamiliar with the joist or support brace.
4-3. If you to the support brace or joist with an approved connector, available at least 6" beyond the box.
5-3. Cut the Ceiling Hole
2-1. Cut a 4" diameter hole through the inner holes of the fan and light kit. Attach a 2" x 4" support brace between...
Owner's Manual - Page 5
... provides you can install your Hunter fan, use sturdy 3/4" diameter pipe to... mounting methods. The steps in one of your Hunter fan in this manual include instructions for ceilings less than ...-01 • 06/08/10 • Hunter Fan Company All Hunter fans use only Hunter speed controls.
Installer's Choice and ..., attach the fan directly to the support structure of the building according to...
Owner's Manual - Page 6
.... • Identify and connect electrical wires. • Lift 40 pounds. Refer to the fan parts. Installing Multiple Fans? If you need the following : • Locate the ceiling joist or other suitable support...; Ladder (height dependent upon installation site)
Checking Your Fan Parts
Carefully unpack your fan to avoid damage to the included Parts Guide. If you can direct you to the ...
Owner's Manual - Page 7
...2 • Installing the Ceiling Plate
CAUTION: To avoid possible electrical shock, before installing your fan, disconnect the power by turning off position, securely fasten a prominent warning device, such as a... Ceiling Peak
For Angled Ceilings: Be sure to the outlet box and associated wall switch location. Align the slotted holes in the outlet box. Ceiling Plate
3" Wood Screw
Steps 2-3 -...
Owner's Manual - Page 8
... the downrod from the adapter. 3-5. Remove the setscrew from unscrewing. Feed the wires from the fan. this coating;
CAUTION: The adapter has a special coating on one side of the pin in...fully installed, 2-3 threads on
the ceiling plate. 3-8. 3 • Assembling and Hanging the Fan
WARNING: Fan may fall if not assembled as directed in the washer with the hooks on the pipe will ...
Owner's Manual - Page 9
...to the black (ungrounded) and the black/white wire (ungrounded) from the fan. 4-5. Wall switches are unfamiliar with national and local electrical codes and ANSI/NFPA 70. Connect the... 42437-01 • 06/08/10 • Hunter Fan Company
Wire Connector Dual Switch Wiring
Single Switch Wiring For all these connections use switch in accordance with wiring, use a qualified electrician. Turn ...
Owner's Manual - Page 10
...press firmly on the trim ring opposite the grooves in the hanger ball. Note: Your fan may have multiple tabs and grooves that the tabs in the canopy are properly aligned, securely tighten... all three canopy screws.
5-5. Swing the fan up with the mounting holes on the ceiling plate. Partially install a canopy screw into the holes ...
Owner's Manual - Page 11
You will damage the protective Dust Armor on this fan have been treated with the blade iron.
Using pliers, loosen the blade iron posts by hand until all blades are loosened, finish unscrewing them by ...
Owner's Manual - Page 12
... housing assembly screw.
7-5. 7 • Completing Your Installation With a Multi Staked Light Fixture
Upper Switch Housing
Housing Assembly Screw
Plug Connector
WARNING: Use only the light fixture supplied with the screws on the upper switch housing. Incorrect connection could cause improper operation and damage to the fan, partially install two housing assembly screws into the upper...
Owner's Manual - Page 13
... install each ). Exceeding the wattage limit marked on the
MAX wattage sticker affixed to the light fixture. Steps 7-7 - 7-8
13 42437-01 • 06/08/10 • Hunter Fan Company Tighten the thumbscrews
securely. 7-8. Install B10 candelabra-based light bulbs (40 Watt maximum each shade, first loosen the three thumbscrews. 7-7. 7 • Completing Your Installation...
Owner's Manual - Page 14
...connector.
8-3. Reversing
Switch
14 42437-01 • 06/08/10 • Hunter Fan Company The pull chain has four settings... use a soft brush or lint-free cloth to the light fixture. Remove surface smudges or accumulated dirt and dust using ...draft. Ceiling fans work best by blowing air downward (counterclockwise blade rotation) in sequence: High, Medium, Low, and Off. • Pull the chain ...
Owner's Manual - Page 15
... at our Web site at the wall switch. Check the plug connection in a location without a dimming control. Pull the pull chain to the wiring the fan section. 3. Remove the shipping bumpers. ...the fan. 2. Check to make sure the wattage and type of the light bulbs that the switch is engaged. 5. If your fan wobbles when operating, use the enclosed balancing kit and instructions to the fan. ...
Parts Guide - Page 1
...Kit Wire Connector Screw, Switch Housing Assembly Pull Chain Pendant Pull Chain Pendant Pull Chain Globe/Shade Thumbscrew Light bulb / Bulb Balancing Kit
Model #
28676
Asm. If parts are included in the box. Dwg. # G0820-01
28677 G0820-02
28678 G0820-03
Finish
Qnty 1
New...77646-03
77646-03
1
65666-01
65666-01
65666-01
Hunter Fan Company • 7130 Goodlett Farms Pkwy. #400 • ...
Similar Questions
Fan Works Ok, Lights Blink, 2 Different Fans.
fan works OK, lights blink, 2 different fans.
fan works OK, lights blink, 2 different fans.
(Posted by Andrew7285 4 years ago)
Light Kit For 28680 Fan.
Do you have to use a bowl light kit or can you install a 3 light kit?
Do you have to use a bowl light kit or can you install a 3 light kit?
(Posted by tayna99159 7 years ago)
How Do I Install My Fan Without The Light Kit?
how do I install my fan without the light kit
how do I install my fan without the light kit
(Posted by Mgdel634 7 years ago)
I'm Trying To Connect The Wires, I'm Replacing My Old Fan With New One. The
i/m trying to wire fan coming from the outlet is colors green, red, white and black how to connected...
i/m trying to wire fan coming from the outlet is colors green, red, white and black how to connected...
(Posted by acaggianelli35 12 years ago)
On The Hunter 22710 Fan Can You Get A Different Light Kit For This Fan.
I want to know if you can get a different light kit since it plugs in like a wall plug. Other light ...
I want to know if you can get a different light kit since it plugs in like a wall plug. Other light ...
(Posted by jpuckett6257 12 years ago)