Hunter 21317 Support Question
Hunter 21317 Support Question
Find answers below for this question about Hunter 21317.Need a Hunter 21317 manual? We have 4 online manuals for this item!
Question posted by don7555 on September 19th, 2013
Can I Replace The Switch With A Remote Control
The fan switch has failed can i replace it with a remote control unit
Current Answers
Related Hunter 21317 Manual Pages
Installation Guide - Page 1
... supply house.
5-4. Attach a 2" x 4" support brace between two joists.
Make sure the circuit breakers to the fan supply line leads and associated wall switch location are unfamiliar with joist or support brace.
For instructions to install your fan manual and begin with the joist or support brace.
4-3. Tools and Supplies You May Need
•...
Owner's Manual - Page 1
Date Purchased
Where Purchased
Type 7 Models
Owner's Guide and Installation Manual
English
Español
Form# 45032-01 20110121 ©2011 Hunter Fan Co. Model Name
Model No.
For Your Records and Warranty Assistance For reference, also attach your receipt or a copy of your receipt to the manual.
Owner's Manual - Page 2
...controls.
© 2011 Hunter Fan Company
2 45032-01 • 01/21/11 • Hunter Fan Company We are unfamiliar with this fan... Hunter replacement parts. • To reduce the risk of personal injury, attach the fan directly to your fan. Table Of Contents
Preparing the Fan Site ...box and associated wall switch location. Never insert foreign objects between rotating fan blades. • ...
Owner's Manual - Page 3
... brace manufacturer).
• e outlet box is secured to the joist or support brace by an approved connector.
• Six inches of the fan and light kit.
Choose a fan site where: • No object can come in contact with joist or support brace.
• e bottom of the outlet box is recessed...
Owner's Manual - Page 4
...or support brace that both the inner and outer holes in the off . Step 3 -
Preparing the Fan Site (continued)
Step 2 - Obtain a UL-approved octagonal 4" x 1-1/2" outlet box, plus two #8... and ANSI/NFPA 70. For instructions to install your ceiling fan, go to the fan supply line leads and associated wall switch location are unfamiliar with national and local electrical codes and ANSI...
Owner's Manual - Page 5
... to the ceiling, recommended for all three Installer's Choice mounting methods.
Considering Optional Accessories
Consider using Hunter's optional accessories, including a wall-mounted or remote speed control. All Hunter fans use only Hunter speed controls. Understanding Mounting and Installer's Choice®
Hunter's patented 3-position mounting system provides you can install your Hunter...
Owner's Manual - Page 6
...; Standard screwdriver (magnetic tip recommended) • Phillips-head screwdriver (magnetic tip recommended) • Wrench or pliers • Ladder (height dependent upon installation site)
Checking Your Fan Parts
Carefully unpack your Hunter dealer or call Hunter Technical Support Department at 888-830-1326 (In Canada, call 1-866-268-1936). 1 • Getting Ready...
Owner's Manual - Page 7
... wood support structure through the slotted holes in Illustration 2-3 (left or right view). 2 • Installing the Hanger Bracket
2-1. Note: Your fan comes with the pilot holes you are installing the fan on each other. do not use slotted holes directly across from the outlet box down through the hole in the middle...
Owner's Manual - Page 8
... the wires are on the threads. this coating; Align the notch on the ball with a wrench or pliers. 3 • Assembling and Hanging the Fan
You can assemble your fan for standard or angled mounting as directed in these installation instructions. Securely retighten the setscrew with the indent in the hanger bracket.
(Rotate...
Owner's Manual - Page 9
...canopy. 3-8. Align the screw holes in the washer with the holes in the rim of the
fan assembly. 3-9.
Place the low profile washer from the hanger ball bracket. 3-7.
Place the canopy... and canopy with three #8-32 x 3/4" screws. 3-10. Raise the fan and place the hook on the previous page. WARNING: Fan may fall if not assembled as shown in these installation instructions. Step 3-6...
Owner's Manual - Page 10
...:
• The black wire (ungrounded) from the ceiling to the black wire (ungrounded) from the fan
• The black wire with a white stripe (ungrounded) from the fan to the wire (ungrounded) for the wall switch
Single Switch Wiring:
• The black wire (ungrounded) from the ceiling to the black (ungrounded) and the black wire...
Owner's Manual - Page 11
... ring up to secure the canopy.
Hanger Bracket
Canopy Trim Ring
Step 5-4
Step 5-3
Step 5-5
Canopy Screw
11 45032-01 • 01/21/11 • Hunter Fan Company Align partially installed screws with key slots in the hanger bracket.
5-2. Securely tighten all four screws.
5-5. Twist canopy trim ring counter clockwise until it...
Owner's Manual - Page 12
... (Detail) Grommet
Note: The blades on the blades.
6-2. Do not use several styles of fan blade irons (brackets that leave any other cleaners that hold the blade to a blade iron using... protection, making the blades less likely to clean the blades. 6 • Assembling the Blades
Hunter fans use a furniture polish or any residue, as they will damage the protective Dust Armor on the blades...
Owner's Manual - Page 13
... install the light fixture, proceed with OR without the included light fixture. Steps 7-1 - 7-3
Housing Assembly Screw
Upper Switch Housing
13 45032-01 • 01/21/11 • Hunter Fan Company CAUTION: Make sure the upper switch housing is securely attached to properly attach and tighten all three screws firmly. 7 • Completing Your Installation...
Owner's Manual - Page 14
... marked on the MAX wattage sticker affixed to the product.
7-7. Plug Connector Detail
Housing Assembly Screw
14 45032-01 • 01/21/11 • Hunter Fan Company
Steps 7-6 - 7-7
Lower Switch Housing
Plug Connector
Note: In compliance with three housing assembly screws. Align the side screw holes in the lower...
Owner's Manual - Page 15
Then,
thread the fan pull chain through the hole in the center of the glass bowl. Thread the light pull chain through the hole...
Cover Plate Finial
15 45032-01 • 01/21/11 • Hunter Fan Company Thread the fan pull chain through the hole in the cover plate and glass bowl. 7-14. Thread the fan pull chain through the finial and screw the finial onto the threaded rod end ...
Owner's Manual - Page 16
...
Step 7-21
16 45032-01 • 01/21/11 • Hunter Fan Company Note: When removing the wires, pull the thin plug connector (male) through first, and then pull the other plug connector (female) through the hole in the lower switch housing. 7-21. 7 • Completing Your Installation With or Without a Bowl Light...
Owner's Manual - Page 17
...Change Airflow Direction Turn the fan off and let it come to the light fixture. The light pull chain controls the power to a complete stop.
The fan pull chain controls power to prevent the ...has four settings in warm weather to clean the blades. Reversing
Switch
17 45032-01 • 01/21/11 • Hunter Fan Company Remove surface smudges or accumulated dirt and dust using a mild...
Owner's Manual - Page 18
..., and check that are not usually made for dimming. Problem: CFL bulbs flicker when controlled by a dimming remote or wall control 1.
Loosen canopy, check all blade iron screws. 3. Check the plug connection in a location without a dimming control. Check to balance the fan. 2. CFL light bulbs are installed meet the specifications on the http://www.hunterfan...
Parts Guide - Page 1
...Switch Housing Assembly Screw, Machine, 6-32
Hanger Bracket Assembly
Blade Assembly
Switch Housing Assembly
Fan...1
08200-01
1
73853-01
1
73854-01
1
65666-01
Hunter Fan Company • 7130 Goodlett Farms Pkwy. #400 • Memphis, TN...Mounting Isolator * Screw, Low Profile Switch Housing Assembly Blade Iron Set Blade..., 6-32 Wire Connector Screw, Switch Housing Assembly Globe/Shade Pull Chain...
Similar Questions
Problems With Remote Control
Hi, I tried to put a new battery for my remote control. I noticed Remote control Blue light on ( Hun...
Hi, I tried to put a new battery for my remote control. I noticed Remote control Blue light on ( Hun...
(Posted by Sandeman05 1 year ago)
Whats The Voltage Rating Of Hunter 21317
whats the voltage rating of hunter 21317, can i install it in India
whats the voltage rating of hunter 21317, can i install it in India
(Posted by kiranabh 1 year ago)
In-operative Ceiling Fan
My Hunter 21317 ceiling fan stopped working on one speed (low). What to do ? or what part do u think...
My Hunter 21317 ceiling fan stopped working on one speed (low). What to do ? or what part do u think...
(Posted by elvisindelrio 3 years ago)
Need For Replacement Switch Housing Assembly In Hunter Ceiling Fan.
Fan model 20728, housing part Purchased 12/2009
Fan model 20728, housing part Purchased 12/2009
(Posted by Anonymous-161179 7 years ago)
Replacement Blade For Hunter 21317
is it possible to buy a single replacement blade
is it possible to buy a single replacement blade
(Posted by vickkinvegas 10 years ago)