I Need Step By Step List Of How To Work Hoover Pro Clean Pet

1. Preparation: Before using the carpet cleaner, make sure the carpet is thoroughly vacuumed to remove any loose dirt or debris. Remove the water tank from the machine and fill it with hot tap water up to the fill line. Then, add the cleaning solution to the solution tank according to the instructions on the bottle.
2. Turn on the machine: Plug the carpet cleaner into an electrical outlet and turn it on by pressing the power switch located on the top of the machine.
3. Adjust the cleaning settings: Use the dial on the front of the machine to adjust the cleaning settings based on the type of carpet being cleaned. For example, choose "Light Clean" for delicate carpets or "Heavy Clean" for heavily soiled carpets.
4. Begin cleaning: Hold down the trigger on the handle to release the cleaning solution onto the carpet, then slowly move the carpet cleaner forward and backward over the area being cleaned. Release the trigger to suction up the dirty water as you go.
5. Rinse the carpet: After cleaning a section of carpet, go over the same area again with clean water only to rinse out any remaining cleaning solution. Hold down the trigger to release the water and then release it to suction up the clean water.
6. Empty the dirty water: When the water tank is full of dirty water, turn off the carpet cleaner and unplug it from the electrical outlet. Remove the water tank and empty it into a sink or drain.
7. Rinse and clean the machine: Rinse out both the water tank and the solution tank with clean water and allow them to dry. Clean the brush roll and nozzle of the carpet cleaner with a soft cloth or brush.
8. Store the carpet cleaner: When the carpet cleaner is fully dry, store it in a cool, dry place.

Note: Be sure to read and follow the manufacturer's instructions for your specific model of Hoover Pro Clean Pet carpet cleaner for best results.