Honeywell TH5220D1029 Support Question
Honeywell TH5220D1029 Support Question
Find answers below for this question about Honeywell TH5220D1029.Need a Honeywell TH5220D1029 manual? We have 1 online manual for this item!
Question posted by jerryw on July 17th, 2011
Setting Temp Varience
What is the recommended setting on temp varience? What are the steps for setting this varience?
Current Answers
Related Honeywell TH5220D1029 Manual Pages
Owner's Manual - Page 1
Operating Manual
FocusPRO® TH5000 Series
Non-Programmable Digital Thermostat
69-1923EFS-01
Owner's Manual - Page 3
ENGLISH
Table of contents
About your new thermostat Thermostat features 2 Setup at a glance 3 Quick reference to controls 4 Quick reference to display 5
Programming & Operation Fan setting (auto/on 6 System setting (heat/cool/auto 7 Auto-changeover (heat/cool 8 Compressor protection 9
FocusPRO® TH5000 Series
Appendices Battery replacement 10 In case of difficulty 11 Customer ...
Owner's Manual - Page 4
... display is easy to -use, push-button climate control. ENGLISH
Operating Manual
About your new thermostat
Congratulations on the purchase of reliable service and easy-to read-even in the dark. • Displays both room temperature and temperature setting. • Removable battery holder for fast, easy replacement. • Built-in compressor protection...
Owner's Manual - Page 5
... system to Auto To change if needed .
3
69-1923EFS-01 Just check the settings below and change , see page 7. Auto is ready to go! Fan (Auto/On): Preset to control both systems automatically, if needed :
1. ENGLISH
This thermostat is the most commonly used setting, but you may prefer On for improved air circulation.
2.
Owner's Manual - Page 6
Operating Manual
Quick reference to controls
Digital display (see page 5)
Battery holder (see page 10)
ENGLISH
M29405
Function Buttons Press to select the function displayed just above each button. (Functions change depending on the task.)
69-1923EFS-01
4
Temperature Buttons Press to set preferred temperature.
Owner's Manual - Page 7
... battery warning (see page 10)
Auxiliary heat (Only for heat pumps with auxiliary heat)
Current inside temperature
Inside
72
Replace Battery
Heat Setting
72 Auxiliary
Heat On
Temperature setting
Fan
Fan setting
Auto
Auto/On (see page 6)
System Heat
System status Heat On/Cool On (If flashing, see page 9)
Function buttons Press the...
Owner's Manual - Page 8
ENGLISH
Operating Manual
Select the fan setting
Fan Auto
System Heat
Fan On
System Heat
MCR29407
Press the FAN button to "On," the fan runs continuously.
69-1923EFS-01
6 In "Auto" mode (the most commonly used setting), the fan runs only when the heating or cooling system is on. If set to select Auto or On.
Owner's Manual - Page 9
... the SYSTEM button to select:
• Heat: Thermostat controls only the heating system.
• Cool: Thermostat controls only the cooling system.
• Off: Heating and cooling systems are off.
• Auto: Thermostat automatically selects heating or cooling depending on how your thermostat was installed. Select the system setting
FocusPRO® TH5000 Series
ENGLISH
Fan Auto...
Owner's Manual - Page 10
... be changed.
69-1923EFS-01
8 The thermostat will automatically adjust settings to Auto, the thermostat automatically selects heating or cooling depending on the indoor temperature. Note: The Auto system setting may The 3-degree separation between heating and
not appear, depending on the same day. When the system is set temperatures is a feature used in climates...
Owner's Manual - Page 11
... conditioning or heat pump system. This feature forces the compressor to the compressor in compressor protection
FocusPRO® TH5000 Series
Inside
75
Fan Auto
Cool Setting
75 Cool On
System Cool
Message flashes until safe restart time has elapsed.
During the wait time, the display will flash the message Cool On...
Owner's Manual - Page 12
.../TH5220D - Even if the warning does not appear, you should replace batteries once a year, or before the batteries are depleted. All settings are optional (to provide backup power) if your thermostat was wired to remove
Auto
Replace Batttery MCR29409
Insert fresh alkaline batteries, then reinstall battery holder. The warning flashes about two...
Owner's Manual - Page 13
... at heating & cooling system is on. • Make sure furnace door is closed securely. • If thermostat is battery-powered, make sure fresh AA or AAA alkaline
batteries (depending on model) are set to acceptable ranges:
settings do not • Heat: 40° to 90°F (4.5° to 37°C).
11
69-1923EFS...
Owner's Manual - Page 14
... than the Inside temperature. Make sure the temperature
is engaged. does not respond • Press SYSTEM button to set system to Heat. "Cool On" or "Heat On" is flashing
• Compressor protection feature is set higher than the Inside temperature.
• Check circuit breaker and reset if necessary.
• Make sure power...
Owner's Manual - Page 15
... No. 50002883-001
TH5320U/TH5220D Battery holder Part No. 50007072-001 Cover plate assembly Part No. 50002883-001
*Use to cover marks left by old thermostats.
13
69-1923EFS-01
ENGLISH
Owner's Manual - Page 21
Manuel d'utilisation
FocusPRO® Série TH5000
Thermostat numérique non programmable
Similar Questions
I Cannot Set My Honeywell Thermostat Th5220d1029 Below 69 Degrees
(Posted by Isircboa 9 years ago)
How To Unlock A Honeywell Digital Thermostat Th5220d1029
(Posted by ckckcd 9 years ago)
How To Test My Honeywell Thermostat Th5220d1029
(Posted by walebandit42 9 years ago)
