Honeywell TH5220D1003 Support Question
Honeywell TH5220D1003 Support Question
Find answers below for this question about Honeywell TH5220D1003 - Digital Thermostat, 2h.Need a Honeywell TH5220D1003 manual? We have 1 online manual for this item!
Question posted by briankmckinney22 on November 20th, 2012
Heat Wont Work
i cant get my heat to turn on and the thermostat is just continiously blinking auxillary heat on
Current Answers
Related Honeywell TH5220D1003 Manual Pages
Owner's Manual - Page 1
Operating Manual
FocusPRO® TH5000 Series
Non-Programmable Digital Thermostat
69-1923EFS-01
Owner's Manual - Page 2
... should be replaced once a year (see page 10).
Registered Trademark. Copyright © 2009 Honeywell International Inc. MCR29404
This manual covers the following models:
TH5110D: For 1 Heat/1 Cool systems TH5220D: For up to 2 Heat/2 Cool systems TH5320U: For up to 3 Heat/2 Cool systems (Remove battery holder to remove batteries.
Owner's Manual - Page 3
...176;F (10°C).
1
69-1923EFS-01 ENGLISH
Table of contents
About your new thermostat Thermostat features 2 Setup at a glance 3 Quick reference to controls 4 Quick reference to display 5
Programming & Operation Fan setting (auto/on 6 System setting (heat/cool/auto 7 Auto-changeover (heat/cool 8 Compressor protection 9
FocusPRO® TH5000 Series
Appendices Battery replacement 10 In...
Owner's Manual - Page 4
...
• One-touch temperature control. • Large, clear, backlit display is easy to give you many years of your new thermostat
Congratulations on the purchase of reliable service and easy-to-use, push-button climate control. It has been designed to read-even in the dark. &#...
Owner's Manual - Page 5
.../Auto/Em. You can select heating or cooling, or set the system to go! Just check the settings below and change , see page 6. Auto is pre-programmed by the installer and ready to Heat....To change if needed .
3
69-1923EFS-01 Heat): Preset to use. ENGLISH
This thermostat is ready to control both systems automatically...
Owner's Manual - Page 6
Operating Manual
Quick reference to controls
Digital display (see page 5)
Battery holder (see page 10)
ENGLISH
M29405
Function Buttons Press to select the function displayed just above each button. (Functions change depending on the task.)
69-1923EFS-01
4
Temperature Buttons Press to set preferred temperature.
Owner's Manual - Page 7
...® TH5000 Series
ENGLISH
Low battery warning (see page 10)
Auxiliary heat (Only for heat pumps with auxiliary heat)
Current inside temperature
Inside
72
Replace Battery
Heat Setting
72 Auxiliary
Heat On
Temperature setting
Fan
Fan setting
Auto
Auto/On (see page 6)
System Heat
System status Heat On/Cool On (If flashing, see page 9)
Function buttons Press...
Owner's Manual - Page 8
ENGLISH
Operating Manual
Select the fan setting
Fan Auto
System Heat
Fan On
System Heat
MCR29407
Press the FAN button to "On," the fan runs continuously.
69-1923EFS-01
6
In "Auto" mode (the most commonly used setting), the fan runs only when the heating or cooling system is on. If set to select Auto or On.
Owner's Manual - Page 9
... on the indoor temperature.
• Em Heat (only for heat pumps with auxiliary heat): Thermostat controls Emergency and Auxiliary Heat. Compressor is locked out.
7
69-1923EFS-01 Press the SYSTEM button to select:
• Heat: Thermostat controls only the heating system.
• Cool: Thermostat controls only the cooling system.
• Off: Heating and cooling systems are off.
• Auto...
Owner's Manual - Page 10
...: The Auto system setting may The 3-degree separation between heating and
not appear, depending on the indoor temperature.
Heat and cool settings must be changed.
69-1923EFS-01
8 be at least 3 degrees apart. The thermostat will automatically adjust settings to Auto, the thermostat automatically selects heating or cooling depending on how your cooling set temperatures...
Owner's Manual - Page 11
... elapsed. When the safe wait time has elapsed, the message stops flashing and the compressor turns on.
9
69-1923EFS-01 During the wait time, the display will flash the message Cool On (or Heat On if you have a heat pump).
Damage can occur if the compressor is restarted too soon after shutdown. ENGLISH...
Owner's Manual - Page 12
...-01
MCR29411
Batteries are permanently stored in memory, and do not require battery power.
10
All settings are optional (to provide backup power) if your thermostat was wired to run on AC power when installed. Operating Manual
Battery replacement
ENGLISH
Press and pull to the display during power interruptions.
Install fresh...
Owner's Manual - Page 13
... 10). Display is blank
• Check circuit breaker and reset if necessary. • Make sure power switch at heating & cooling system is on. • Make sure furnace door is closed securely. • If thermostat is battery-powered, make sure fresh AA or AAA alkaline
batteries (depending on model) are set to acceptable...
Owner's Manual - Page 14
...
12 Make sure the temperature
cooling system
is set lower than the Inside temperature. does not respond • Press SYSTEM button to set system to Heat.
Wait 5 minutes for the system to respond. Make sure the temperature
is set higher than the Inside temperature.
• Check circuit breaker and reset if...
Owner's Manual - Page 15
... No. 50002883-001
TH5320U/TH5220D Battery holder Part No. 50007072-001 Cover plate assembly Part No. 50002883-001
*Use to cover marks left by old thermostats.
13
69-1923EFS-01
ENGLISH Customer assistance
Model number
Date code
xxxxxxx
xxxxxxx
MCR29412
FocusPRO® TH5000 Series
For assistance with this product, please visit...
Owner's Manual - Page 21
Manuel d'utilisation
FocusPRO® Série TH5000
Thermostat numérique non programmable
Similar Questions
My Heat Wont Work And My Thermostat Went Blank
(Posted by sajl2 9 years ago)
Why Is The Honeywell Focuspro 5000 Digital Thermostat Blinking Cool On
(Posted by bobalta 10 years ago)
How To Reset Honeywell Th5220d1003 Digital Thermostat
(Posted by Skippw953 10 years ago)
Honeywell Th5220d1003 Digital Thermostat Does Not Work
(Posted by MrGhusto 10 years ago)
Thermostat Has Blank Screen, Heat Wont Work
i have no idea how to re set or get the thermostat to come on, just went blank sometime today while ...
i have no idea how to re set or get the thermostat to come on, just went blank sometime today while ...
(Posted by weinbower86 12 years ago)